![]() |
|
![]() |
#1 |
What are you looking at?
Join Date: Jul 2003
Location: Kellyville,Oklahoma
Posts: 308
|
![]()
Ok guys help me out here. I recently found my radiator low on fluid so I filled it up. I started the truck and the fluid disapeared...so I filled it on up with it running. I let it run for a while and the antifreeze started leaking out of the overflow hose. I shut the engine off and check the fluid level again and it is low again. I changed the radiator cap and the thermosat...neither helped.
any ideas???? ![]()
__________________
1971 GMC LWB 2005 Honda Element 2007 Honda Fit ![]() |
![]() |
![]() |
![]() |
#2 |
WHYBYNU when old will do?
Join Date: Jul 2003
Location: Loudon, NH
Posts: 876
|
From what I understand, this is because our trucks don't have a coolant recovery system. I think all you would have to do is put on a later model cap, and a recovery tank, and that will solve the problem. I plan on doing that this summer. Some others have already done this, and will fill in the gaps I may have left.
__________________
-72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
As already stated, our trucks do not have a expansion/recovery tank. If the cooling system is in good condition the coolant will seek a level probably 2" to 4" below the cap and remain there. If you try to "top it off" it will only push it back out. This is normal.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Acording to my 69 and 70 owners manuals, one inch below the cap is where you should fill it to.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
You can get a coolant jug, mount, & hose for about $10 at AutoZone. I put one in just last week.
Did they Really not have Any coolant recovery system... at all? John
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! ![]() 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! ![]() |
![]() |
![]() |
![]() |
#6 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
There was a dealer installed unit, but otherwise, no recovery system at all.
If you install one, don't forget the later rad cap like mentioned before. |
![]() |
![]() |
![]() |
#7 |
What are you looking at?
Join Date: Jul 2003
Location: Kellyville,Oklahoma
Posts: 308
|
Thanks for the info...its the little things like this that drive you crazy. Where do you mount the recovery container or does it matter? Also what type of cap do I ask for when I go to the parts store?
Greg
__________________
1971 GMC LWB 2005 Honda Element 2007 Honda Fit ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2004
Location: Grant, Alabama
Posts: 504
|
You can mount the tank anywhere, theres plenty of room on the passenger side inner fenderwell. Get a cap for a 78 chevy truck, they had the overflow tanks stock. As lkong as the cap has a rubber seal on the smaller part that is the lowest part and a rubber strip under the cap where it seals against the top of the readiator neck(where the cap latches on). Get the lever style so you can release the pressure to take off the cap when the engine is hot if you have to.
__________________
72 Chevy C20, SOLD (Dang it.) 09 Challanger RT six speed in all black. 74 Datsun 710 wagon, all 1.8 liters of screaming Datsun power. 73 C10 long bed, 350/350 combo, nice shape. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
When mounting the tank, you want the top of it to be near the same level as the top of the radiator.
My truck is not the prettiest truck in the world, & never will be. So I mounted mine on the inner wheel well. Just 2 little holes. It took me about 45 minutes to decide where to put it. & about 10 minutes to install it.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! ![]() 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! ![]() |
![]() |
![]() |
![]() |
#10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Actually, it doesn't matter where you put it as far as how high, you can toss an empty 2 liter of mtn dew in the fender pocket if you want, just rin a hose to the bottom of the bottle, doesn't even need to be sealed off or anything.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|