72 C-10 question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Novaguy73 · 12-20-2005, 07:18 PM

Hey guys i just bought a 72 C10 a/c truck for $1000. The truck itself runs and drives nicely but needs some little things. The only main thing wrong is the floors are GONE, and i mean gone, otherwise its in good shape. Im very mechenical and the reason i bought it was to try out some bodywork on somthing that wasnt my main project and will be a daily driver. Anyone done this or have a detailed process on how to go about it? It needs the typical floor pans,braces, rockers, and cab corners. All of wich can be had for roughly 200 bucks. Id like to have a game plan before i start cuting ya know!! Thanks in advance.
-Nick

Frizzle Fry · 12-20-2005, 08:21 PM

I'm considering buying one of these: http://ebfabman.com/

71swb4x4 · 12-23-2005, 01:04 PM

I have the videos, can't go wrong with them.

Novaguy73 · 12-23-2005, 12:28 AM

ttt

FRENCHBLUE72 · 12-23-2005, 10:08 AM

http://ebfabman.com/ Try this out....

LONGHAIR · 12-23-2005, 10:30 AM

Please post your question in one place. Multiple postings of the same question are confusing and hard to follow. Plus you get repetitive answers from differnt people because of the areas that they frequent.

I merged them here

1971LT1SWBPOSI373 · 12-23-2005, 12:50 PM

Get the video's! They are put together well and have the game plan all laid out for you. Well worth the money.

krue · 12-23-2005, 07:37 AM

Check out www.ebfabman.com His video will put you on the right road for cab repair.

12-20-2005, 07:18 PM	#1
Novaguy73 Registered User Join Date: Oct 2005 Location: Waterloo, Ia Posts: 73	72 C-10 question... Hey guys i just bought a 72 C10 a/c truck for $1000. The truck itself runs and drives nicely but needs some little things. The only main thing wrong is the floors are GONE, and i mean gone, otherwise its in good shape. Im very mechenical and the reason i bought it was to try out some bodywork on somthing that wasnt my main project and will be a daily driver. Anyone done this or have a detailed process on how to go about it? It needs the typical floor pans,braces, rockers, and cab corners. All of wich can be had for roughly 200 bucks. Id like to have a game plan before i start cuting ya know!! Thanks in advance. -Nick

12-20-2005, 08:21 PM	#2
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 72 C-10 question... I'm considering buying one of these: http://ebfabman.com/

12-23-2005, 01:04 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: 72 C-10 question... I have the videos, can't go wrong with them. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-23-2005, 12:28 AM	#4
Novaguy73 Registered User Join Date: Oct 2005 Location: Waterloo, Ia Posts: 73	Re: 72 C-10 question... ttt

12-23-2005, 10:08 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 72 C-10 question... http://ebfabman.com/ Try this out.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-23-2005, 10:30 AM	#6
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	Re: 72 C-10 question... Please post your question in one place. Multiple postings of the same question are confusing and hard to follow. Plus you get repetitive answers from differnt people because of the areas that they frequent. I merged them here Last edited by LONGHAIR; 12-23-2005 at 10:30 AM.

12-23-2005, 12:50 PM	#7
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Re: 72 C-10 question... Get the video's! They are put together well and have the game plan all laid out for you. Well worth the money. __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

12-23-2005, 07:37 AM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: 72 C-10 question... Check out www.ebfabman.com His video will put you on the right road for cab repair. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.