69-70 throttle link pic needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

briank · 09-10-2014, 02:38 PM

Working on my 70 k5 with 350 in it ,put a 72 4bbl intake and quadrajet on it. These were off a parts 72 auto I have but the 70 is a three on the tree, anbody got a close up of the throttle linkage on the side of tje quadrajet? I cant find a pic in my service manual or do i need an overhaul manual?

**FirstOwner69** · 09-10-2014, 06:20 PM

I'm not sure this will help, Brian. The picture is of my 69 2wd, with a TH400 and 350. I know, at minimum, you need to ignore the downshift switch and bracket to actuate the switch.

If nothing else it'll take your post back to the top.

Jim

Tree-50 · 09-10-2014, 09:47 PM

First is a pic of a rod and not a cable it would look the same pretty much.

Here's mine just doesn't have the cable connected.

briank · 09-11-2014, 03:12 PM

You have a clearer picture (lighter) and do you have one at the accelerator pedal as well? What year is your truck Tree 50?

**FirstOwner69** · 09-11-2014, 03:20 PM

Is it safe to assume your 70 still has a rod from the firewall to the carb? The change to cable was made in 71.

Tree-50 · 09-11-2014, 07:46 PM

Quote:

Originally Posted by briank

You have a clearer picture (lighter) and do you have one at the accelerator pedal as well? What year is your truck Tree 50?

I can get one but it looks similar to this pic (not mine) I had to bend the rod on my 68 cause it's curved if you go straight up.

Mine is a 68, pulled throttle cable and whole pedal assembly from a 77.

briank · 09-11-2014, 05:58 PM

Yes, i pulled it off a 69 i have for parts, but the 69 is an automatic and a 2bbl but i did use the rod.

mechanicalman · 09-11-2014, 08:30 PM

Does your carb linkage look like Tree-50's? If so, maybe you could take a dremel or die grinder and remove the stud that holds the cable on a 72? Then drill it out if nec. for your rod style linkage.

Otherwise, put on the cable. You can get a carb adaptor at the u-pull-it off another quadrajet that has a cable, if you didn't get the one off the 72. That also opens the door for a down-shift cable if you decide to go automatic in the future.

It's a better way to go if your motor mounts break, there is less chance of the throttle getting stuck.

09-10-2014, 02:38 PM	#1
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	69-70 throttle link pic needed Working on my 70 k5 with 350 in it ,put a 72 4bbl intake and quadrajet on it. These were off a parts 72 auto I have but the 70 is a three on the tree, anbody got a close up of the throttle linkage on the side of tje quadrajet? I cant find a pic in my service manual or do i need an overhaul manual?

09-10-2014, 06:20 PM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,846	Re: 69-70 throttle link pic needed I'm not sure this will help, Brian. The picture is of my 69 2wd, with a TH400 and 350. I know, at minimum, you need to ignore the downshift switch and bracket to actuate the switch. If nothing else it'll take your post back to the top. Jim Attached Images

09-10-2014, 09:47 PM	#3
Tree-50 Registered User Join Date: Jul 2014 Location: Dallas, Texas Posts: 120	Re: 69-70 throttle link pic needed First is a pic of a rod and not a cable it would look the same pretty much. Here's mine just doesn't have the cable connected. Attached Images

09-11-2014, 03:12 PM	#4
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: 69-70 throttle link pic needed You have a clearer picture (lighter) and do you have one at the accelerator pedal as well? What year is your truck Tree 50?

09-11-2014, 03:20 PM	#5
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,846	Re: 69-70 throttle link pic needed Is it safe to assume your 70 still has a rod from the firewall to the carb? The change to cable was made in 71.

09-11-2014, 05:58 PM	#7
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: 69-70 throttle link pic needed Yes, i pulled it off a 69 i have for parts, but the 69 is an automatic and a 2bbl but i did use the rod.

09-11-2014, 08:30 PM	#8
mechanicalman Registered User Join Date: Jun 2014 Location: Glendale, Arizna Posts: 1,642	Re: 69-70 throttle link pic needed Does your carb linkage look like Tree-50's? If so, maybe you could take a dremel or die grinder and remove the stud that holds the cable on a 72? Then drill it out if nec. for your rod style linkage. Otherwise, put on the cable. You can get a carb adaptor at the u-pull-it off another quadrajet that has a cable, if you didn't get the one off the 72. That also opens the door for a down-shift cable if you decide to go automatic in the future. It's a better way to go if your motor mounts break, there is less chance of the throttle getting stuck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.