Upper Control Arm Spacer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

creepdogg · 10-10-2011, 09:46 AM

I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

cdowns · 10-10-2011, 10:31 AM

i'd check at local NAPA store or a shop that does frontend alignments

creepdogg · 10-10-2011, 10:39 AM

Quote:

Originally Posted by cdowns

i'd check at local NAPA store or a shop that does frontend alignments

These aren't the alignment spacers this is a large washer that sits between the cross member and the alignment spacers.

creepdogg · 10-10-2011, 10:45 AM

See in this pic I have washers on the left side and there is the large spacer that is purple on the right, this is the part I am talking about.

cdowns · 10-10-2011, 11:22 AM

that is still where i';d go look for them

**RenoKeene** · 10-10-2011, 12:36 PM

I may have a couple, I'll check when I get home this afternoon. Do you just need 1?

creepdogg · 10-10-2011, 12:54 PM

Quote:

Originally Posted by RenoKeene

I may have a couple, I'll check when I get home this afternoon. Do you just need 1?

Yes just one .
Posted via Mobile Device

**RenoKeene** · 10-10-2011, 12:59 PM

I'll let you know tomorrow...no computer at home.

creepdogg · 10-10-2011, 01:21 PM

Quote:

Originally Posted by RenoKeene

I'll let you know tomorrow...no computer at home.

Awesome tks man

Chris

**RenoKeene** · 10-10-2011, 05:42 PM

I've got one. PM me your address and I'll put it in the mail in the morning.
No charge, just pay it forword.
Brad
Posted via Mobile Device

**RenoKeene** · 10-11-2011, 08:31 AM

Hey Chris, here is a pic of the spacer. Going out today. If for any reason this is different than the others let me know and I will send you the other 3 so they will all be the same. Pay it forword means free, and when it's your turn do the same for the next guy.
Good luck on your build.
Brad

(How about them Lions!)

creepdogg · 10-11-2011, 08:33 AM

Quote:

Originally Posted by RenoKeene

Hey Chris, here is a pic of the spacer. Going out today. If for any reason this is different than the others let me know and I will send you the other 3 so they will all be the same. Pay it forword means free, and when it's your turn do the same for the next guy.
Good luck on your build.
Brad

(How about them Lions!)

Thats it, man you rock!!!! Will do boss, yeah who would have thought they are kickin some arse this year

**70cst** · 10-11-2011, 08:58 AM

Quote:

Originally Posted by RenoKeene

I've got one. PM me your address and I'll put it in the mail in the morning.
No charge, just pay it forword.
Brad
Posted via Mobile Device

Very nice gesture

10-10-2011, 09:46 AM	#1
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Upper Control Arm Spacer I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

10-10-2011, 10:31 AM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Upper Control Arm Spacer i'd check at local NAPA store or a shop that does frontend alignments __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-10-2011, 10:45 AM	#4
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Upper Control Arm Spacer See in this pic I have washers on the left side and there is the large spacer that is purple on the right, this is the part I am talking about. Attached Images

10-10-2011, 11:22 AM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Upper Control Arm Spacer that is still where i';d go look for them __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-10-2011, 12:36 PM	#6
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Upper Control Arm Spacer I may have a couple, I'll check when I get home this afternoon. Do you just need 1? __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

10-10-2011, 12:59 PM	#8
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Upper Control Arm Spacer I'll let you know tomorrow...no computer at home. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

10-10-2011, 05:42 PM	#10
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Upper Control Arm Spacer I've got one. PM me your address and I'll put it in the mail in the morning. No charge, just pay it forword. Brad Posted via Mobile Device __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

10-11-2011, 08:31 AM	#11
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Upper Control Arm Spacer Hey Chris, here is a pic of the spacer. Going out today. If for any reason this is different than the others let me know and I will send you the other 3 so they will all be the same. Pay it forword means free, and when it's your turn do the same for the next guy. Good luck on your build. Brad (How about them Lions!) Attached Images __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.