WA Misc. Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Desert Rat** · 03-26-2015, 04:56 PM

PIC 1. PB Booster Brackets small diameter dual diaphram for 67-70 3/4, and 1 ton (wont fit 71-2 DB) blasted and painted 55.00 shipped.

PIC 2. 71-72 Chevrolet front bumper brackets blasted and painted 55.00 shipped

PIC 3. 69-72 1/2 PB Booster Brackets 45.00 shipped

PIC 4. 71-72 NP205 shift handle knobs 30.00 ea. shipped

PIC 5. Rechromed 205 transfer case shifter, the thread knobs have been cut down and boogered up to fit the earlier 69/70 knob, they look kind of ugly but the knob does tighten down fine, also for reasons unknown there has been a sleeve installed in the bolt mounting.hole to.use a smaller bolt, the handle is also bent slightly off to the passanger side for some reason? it is a very nice looking rechromed handle 70.00 Shipped

**derotoreut** · 03-26-2015, 05:04 PM

Interested in NP205 shift knob pending pictures.

**derotoreut** · 03-26-2015, 08:32 PM

Quote:

Originally Posted by derotoreut

Interested in NP205 shift knob pending pictures.

Gonna pass on the other knob. Good luck.

**Desert Rat** · 03-27-2015, 11:38 AM

Pmt info sent to Ozark Tim in regards to 205 knob

shawno72 · 03-26-2015, 05:06 PM

Interested in the $45 pb brackets

**Desert Rat** · 03-26-2015, 05:11 PM

im working on pics, my phone keeps timing out and replys Google Chromes not responding very frustrating errrr. Im going to keep trying.

**Desert Rat** · 03-26-2015, 05:24 PM

pic 1

**Desert Rat** · 03-26-2015, 05:29 PM

pic 2

**Desert Rat** · 03-26-2015, 05:44 PM

shifter is the one on the right with the knob.

teeitup · 03-26-2015, 07:02 PM

Ozark Tim, may be interested in a 205 knob, I will text him

Ozark Tim · 03-26-2015, 07:21 PM

Thx randy
I'll take one of the 205 knobs
Thx tim

shawno72 · 03-27-2015, 12:39 PM

Ok me payment info for the #3 booster bracket. I'll take it

**Desert Rat** · 03-27-2015, 12:46 PM

Pmt info sent to Shawno for 1/2 pb bb
Thank you

shawno72 · 03-27-2015, 01:01 PM

Quote:

Originally Posted by Desert Rat

Pmt info sent to Shawno for 1/2 pb bb
Thank you

Pm responded

**Desert Rat** · 03-27-2015, 04:05 PM

1/2 ton PB Booster Brackets still available !

**jmader** · 03-27-2015, 07:52 PM

Do you still have the bracket in pic #1?

**Desert Rat** · 03-27-2015, 08:34 PM

I just put them on ebay about 15 min ago, I should have pulled them off here first. If you are interested nobody has bid. I have no problem ending auction.

**jmader** · 03-28-2015, 09:18 AM

Yes I'll take them if they'll work for a 1967 3/4 drum/drum setup.

**Desert Rat** · 03-28-2015, 10:42 AM

jmader-pm sent

**Desert Rat** · 03-29-2015, 05:05 PM

pb brackets in pic 1 sold
1 205 knob sold, 1 still available!

**Desert Rat** · 03-31-2015, 06:55 AM

Still available
Picture #2 $55
Picture #3 $45
Picture#4 $30 (one shifter knob left)
Picture #5 $70

If you have a reasonable offer please contact me!

All prices include shipping!!

03-26-2015, 05:11 PM	#6
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts im working on pics, my phone keeps timing out and replys Google Chromes not responding very frustrating errrr. Im going to keep trying.

03-26-2015, 05:24 PM	#7
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts pic 1 Attached Images

03-26-2015, 05:29 PM	#8
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts pic 2 Attached Images

03-26-2015, 05:44 PM	#9
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts shifter is the one on the right with the knob. Attached Images

03-26-2015, 07:02 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Misc. Parts Ozark Tim, may be interested in a 205 knob, I will text him __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2015, 04:56 PM	#1
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Misc. Parts PIC 1. PB Booster Brackets small diameter dual diaphram for 67-70 3/4, and 1 ton (wont fit 71-2 DB) blasted and painted 55.00 shipped. PIC 2. 71-72 Chevrolet front bumper brackets blasted and painted 55.00 shipped PIC 3. 69-72 1/2 PB Booster Brackets 45.00 shipped PIC 4. 71-72 NP205 shift handle knobs 30.00 ea. shipped PIC 5. Rechromed 205 transfer case shifter, the thread knobs have been cut down and boogered up to fit the earlier 69/70 knob, they look kind of ugly but the knob does tighten down fine, also for reasons unknown there has been a sleeve installed in the bolt mounting.hole to.use a smaller bolt, the handle is also bent slightly off to the passanger side for some reason? it is a very nice looking rechromed handle 70.00 Shipped

03-26-2015, 05:04 PM	#2
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: Misc. Parts Interested in NP205 shift knob pending pictures. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

03-27-2015, 11:38 AM	#4
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts Pmt info sent to Ozark Tim in regards to 205 knob

03-26-2015, 05:06 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Misc. Parts Interested in the $45 pb brackets __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-26-2015, 07:21 PM	#11
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Misc. Parts Thx randy I'll take one of the 205 knobs Thx tim

03-27-2015, 12:39 PM	#12
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Misc. Parts Ok me payment info for the #3 booster bracket. I'll take it __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-27-2015, 12:46 PM	#13
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts Pmt info sent to Shawno for 1/2 pb bb Thank you

03-27-2015, 04:05 PM	#15
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts 1/2 ton PB Booster Brackets still available !

03-27-2015, 07:52 PM	#16
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Misc. Parts Do you still have the bracket in pic #1? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-27-2015, 08:34 PM	#17
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts I just put them on ebay about 15 min ago, I should have pulled them off here first. If you are interested nobody has bid. I have no problem ending auction. Last edited by Desert Rat; 03-27-2015 at 08:42 PM.



Register or Log In To remove these advertisements.

03-28-2015, 09:18 AM	#18
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Misc. Parts Yes I'll take them if they'll work for a 1967 3/4 drum/drum setup. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-28-2015, 10:42 AM	#19
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts jmader-pm sent

03-29-2015, 05:05 PM	#20
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts pb brackets in pic 1 sold 1 205 knob sold, 1 still available!

03-31-2015, 06:55 AM	#21
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Re: Misc. Parts Still available Picture #2 $55 Picture #3 $45 Picture#4 $30 (one shifter knob left) Picture #5 $70 If you have a reasonable offer please contact me! All prices include shipping!!

Register or Log In To remove these advertisements.