Factory clock? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 12-02-2002, 11:09 AM

Did the 67 -72 Trucks ever come with a factory clock in the bezel?. I don't think so but I want to add one.

JimKshortstep4x4 · 12-02-2002, 11:26 AM

They did not come from the factory with a clock but some dealers
installed them. Most used the small round clocks as found on the early Cameros and installed them in the vacant spot of the gauge
dash. My son's 72 Suburban has a dealer installed clock mounted just above the windshield and it looks factory, but it is a Camero clock, also.

Jim

70c10 · 12-02-2002, 12:28 PM

Thanks. I'll probably go with the Camaro clock too!

wlee · 12-02-2002, 01:57 PM

What a great debate - did they come from the factory or not? Some say yes, but only in Canada, others say no - they were installed by dealers - here's a shot of mine, I purchased this complete dash assembly from a guy that sells them on Ebay. It's a quartz clock from the Camaro and a 7 K Tach

70c10 · 12-02-2002, 03:37 PM

SWEEET!!!. He does an excellent job. I've seen them before on ebay.

treefrog · 12-02-2002, 05:37 PM

Who's the guy selling these on ebay? I'd like to see what he has.
TF

tom hand · 12-02-2002, 07:41 PM

I'm pretty sure the clock in that picture came from a mid 80's chevy truck. I had an 86 that was a complete piece of sh!t and I believe when I sold it that clock was the only thing that had not given me problems. lol FYI those clocks "tick" VERY loud. If your a lite sleeper you would never sleep a wink in a truck with one of those clocks.

70c10 · 12-02-2002, 07:43 PM

TF,
That's it right there. About $400 +/- delivered to your door ready to go.

Hooter · 12-02-2002, 07:51 PM

make sure you get the clock that says "quartz" the non quartz clocks dont work. The clock in my 70 monte don't work. The clock that was in the 74 cheyenne, nope and the clock in my 77 silverado nope.

*Gee_Emm* · 12-02-2002, 08:21 PM

Canadian trucks didnt come with clocks either.

wlee · 12-02-2002, 09:46 PM

I told you it was a great debate!

His email is ronaldschuldt@hotmail.com
and his Ebay id is boomer85

Longhorn Man · 12-02-2002, 10:07 PM

And for those who do not know...the tach is a camaro tach too...second gen, 70 1/2 to 81.

DanoDMano · 12-02-2002, 10:18 PM

Besides hunting them down at a junkyard, does anyone out there know where a guy could buy the Tach and clock from the camaros Longhornmail mentioned??

Maybe a camaro website or aftermarket stuff??

That is a really nice looking cluster....

**Tim Christian** · 12-02-2002, 10:49 PM

I have a nos quartz clock like is shown in the picture it has the wiring harness and directions but the knob is missing but you can buy the knobs. $40.00 bucks shipped

wlee · 12-03-2002, 02:26 PM

Here's Boomer85's current auction list - he doesn't have any 7K tach/clock bezels on it, but there's a buttload of other "candy" over there. He does have a new bezel without guages for our trucks.

He custom built mine for me & will probably do the same for any of you guys.

http://cgi6.ebay.com/ws/eBayISAPI.dl...ince=30&rdir=0

chaptr2 · 12-03-2002, 02:49 PM

Check this site out in the swap meet section. http://www.nastyz28.com/cgi-bin/Ulti...i?action=intro

12-02-2002, 11:09 AM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Factory clock? Did the 67 -72 Trucks ever come with a factory clock in the bezel?. I don't think so but I want to add one. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-02-2002, 12:28 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Thanks. I'll probably go with the Camaro clock too! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-02-2002, 01:57 PM	#4
wlee Just an Old Mr Goodwrench Join Date: Feb 2002 Location: Green Ridge, MO USA Posts: 259	What a great debate - did they come from the factory or not? Some say yes, but only in Canada, others say no - they were installed by dealers - here's a shot of mine, I purchased this complete dash assembly from a guy that sells them on Ebay. It's a quartz clock from the Camaro and a 7 K Tach Attached Images __________________ 1969 CST 20 Longhorn 1970 CST 20 Fleetside 1991 Jaguar Sovereign 1992 Mazda Miata

12-02-2002, 03:37 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	SWEEET!!!. He does an excellent job. I've seen them before on ebay. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-02-2002, 05:37 PM	#6
treefrog Registered User Join Date: May 2002 Location: Knoxville, TN USA Posts: 189	seller Who's the guy selling these on ebay? I'd like to see what he has. TF

12-02-2002, 11:26 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	They did not come from the factory with a clock but some dealers installed them. Most used the small round clocks as found on the early Cameros and installed them in the vacant spot of the gauge dash. My son's 72 Suburban has a dealer installed clock mounted just above the windshield and it looks factory, but it is a Camero clock, also. Jim

12-02-2002, 07:41 PM	#7
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I'm pretty sure the clock in that picture came from a mid 80's chevy truck. I had an 86 that was a complete piece of sh!t and I believe when I sold it that clock was the only thing that had not given me problems. lol FYI those clocks "tick" VERY loud. If your a lite sleeper you would never sleep a wink in a truck with one of those clocks. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

12-02-2002, 07:43 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	TF, That's it right there. About $400 +/- delivered to your door ready to go. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-02-2002, 07:51 PM	#9
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	make sure you get the clock that says "quartz" the non quartz clocks dont work. The clock in my 70 monte don't work. The clock that was in the 74 cheyenne, nope and the clock in my 77 silverado nope. __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

12-02-2002, 08:21 PM	#10
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Canadian trucks didnt come with clocks either.

12-02-2002, 09:46 PM	#11
wlee Just an Old Mr Goodwrench Join Date: Feb 2002 Location: Green Ridge, MO USA Posts: 259	I told you it was a great debate! His email is ronaldschuldt@hotmail.com and his Ebay id is boomer85 __________________ 1969 CST 20 Longhorn 1970 CST 20 Fleetside 1991 Jaguar Sovereign 1992 Mazda Miata

12-02-2002, 10:07 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	And for those who do not know...the tach is a camaro tach too...second gen, 70 1/2 to 81.

12-02-2002, 10:18 PM	#13
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Besides hunting them down at a junkyard, does anyone out there know where a guy could buy the Tach and clock from the camaros Longhornmail mentioned?? Maybe a camaro website or aftermarket stuff?? That is a really nice looking cluster.... __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

12-02-2002, 10:49 PM	#14
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a nos quartz clock like is shown in the picture it has the wiring harness and directions but the knob is missing but you can buy the knobs. $40.00 bucks shipped Last edited by Tim Christian; 12-03-2002 at 08:39 AM.

12-03-2002, 02:26 PM	#15
wlee Just an Old Mr Goodwrench Join Date: Feb 2002 Location: Green Ridge, MO USA Posts: 259	Here's Boomer85's current auction list - he doesn't have any 7K tach/clock bezels on it, but there's a buttload of other "candy" over there. He does have a new bezel without guages for our trucks. He custom built mine for me & will probably do the same for any of you guys. http://cgi6.ebay.com/ws/eBayISAPI.dl...ince=30&rdir=0 __________________ 1969 CST 20 Longhorn 1970 CST 20 Fleetside 1991 Jaguar Sovereign 1992 Mazda Miata



Register or Log In To remove these advertisements.

12-03-2002, 02:49 PM	#16
chaptr2 Registered User Join Date: Mar 2000 Location: Olalla, WA Posts: 705	Check this site out in the swap meet section. http://www.nastyz28.com/cgi-bin/Ulti...i?action=intro __________________ This is only my opinion and it is subject to change. 70 GMC Short box stepside Blown 388 Stroker 72 K/5 Blazer 350/SM465/205

Register or Log In To remove these advertisements.