WY 1971 4x4 blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 01-19-2010, 06:17 PM

Just picked up two 1971/72 4x4 blazers. I've only got one home so far but it was filled to the top with parts stripped off a third low mile blazer. I will start with a short list of parts and pictures and add more or start a new thread as I pull parts and get the second blazer home. I would like to keep the body shell and drivetrain complete on the first one, but will be parting the shell and running gear on the second one. One has a single wall top and one has the double wall. Please reply in thread. I will update order and sold status at the top of the thread. Thanks, Sharpie
Brown buckets and console. Nice foam. Clean console. $650 shipped. Moved to Blazer section. Price dropped to $600 shipped.
Utility buckets with correct brackets. $500 shipped. Moved to Blazer section. Price dropped to $450 shipped.
Shorty Headman 4x4 headers. Nice shape. No dents. $100 shipped.
Rear hatch. Nicest I've seen. No damage anywhere. $500 shipped. Moved to Blazer section. Sold to 71stroker. Thanks, Sharpie
Wheel wells. Very clean. NO RUST. $150 shipped.
Fuel fill spout, cover and vapor return. $100 shipped
V8 tach dash. Clean original. Nice circuit. Bezels is shot. $250 shipped.
205 auto floor hump. Near perfect. NO RUST. $75 shipped
205 black shifter and knob. $65 shipped
205 chrome shifter and knob. part #3991932. $100 shipped. Sold to Budman K20. Shipped 1/22/10.
205 shifter boot and ring. $40 shipped
White steel door panels. $75 shipped. Sold to 68 C-10 panel. Thanks, Sharpie

*sharpie1972* · 01-19-2010, 06:24 PM

pics

*sharpie1972* · 01-19-2010, 06:26 PM

pics 2

*sharpie1972* · 01-19-2010, 06:28 PM

pics 3

*sharpie1972* · 01-19-2010, 06:30 PM

pics 4

*sharpie1972* · 01-19-2010, 06:32 PM

pics 5

**71blksuper4x4** · 01-19-2010, 07:30 PM

hey Dennis, does this blazer have the part on the a/c that holds up the vacuum canister? Also, I am interested in a manual 4x4 large hump (prefer 1970), and rear bumper brackets from a blazer. Trevor

1949gmc · 01-19-2010, 07:33 PM

Does this mean that you're selling this ochre colored truck as a roller?

**too much stuff** · 01-19-2010, 07:43 PM

Dennis, blue lockout hubs that are decent?

*sharpie1972* · 01-19-2010, 07:41 PM

Hi Trevor, Not sure on the A.C. part. If it's the plastic canister it's bolted right to the housing. I will check the second blazer when I get it home. It also has the 4 speed hump you are after. I will put you first in line on it. There were bumper brackets in the deal, but I'm not sure what the blazer ones look like compared to truck 4x4.

1949gmc: I have local interest in the roller, but if it doesn't sell I will be listing it on the Board. Thanks, Sharpie

**71blksuper4x4** · 01-19-2010, 07:47 PM

Dennis, thanks for getting back with me. There should be a little curved, almost angle iron looking piece that the plastic canister is bolted to, and then that is bolted to the a/c fiberglass housing. I am looking for that bracket. Also, I will see about finding you a pic of rear bumper brackets for me. They have a extra brace welded or rivited to the inside of them. Kinda fugly looking, but that's what I am looking for as well. The hump I am looking for, I think has the transfer case hole more centered than off to the side. I am needing it for a 70' swb that I picked up recently. Someone screwed a 73+ style hump to the floor. I need to change cabs anyway, but I would like to find a correct hump. I am going yarding on Friday, so it might be put on hold until I see if I find something local hump wise. Trevor

**71blksuper4x4** · 01-19-2010, 07:50 PM

Hey Dennis, I am also looking for a chrome sm465 shifter for a 4x4. Does that Blazer have one? Trevor

*sharpie1972* · 01-19-2010, 07:49 PM

Eric, I only have Warns available now. I will put you first in line if the second blazer has factory hubs. Sharpie

*sharpie1972* · 01-19-2010, 07:52 PM

Hi Trevor, the 4 speed blazer was the low miler that got stripped. There are more parts to come with the second one. I will let you know if there is a chrome 465. Sharpie

**D.PASSMORE** · 01-19-2010, 08:29 PM

Are you breaking the tub down? I need a drivers bed side and 6" of rear floor with cross member. I wonder what freight would be... intrested though.

drunkbus · 01-19-2010, 08:31 PM

How about the filler neck from the gas tank? Rear carpet strip back near the tailgate?

*sharpie1972* · 01-19-2010, 08:32 PM

I will let you know when I get the second blazer home and check it over. The drivers bedside on this one has previous bodywork. Sharpie

**D.PASSMORE** · 01-20-2010, 07:19 AM

Quote:

Originally Posted by sharpie1972

I will let you know when I get the second blazer home and check it over. The drivers bedside on this one has previous bodywork. Sharpie

Sounds good, If the body damage isn't really bad (I can't really tell in the picture). Still very intrested in either one. Thanks

**lks dcvn** · 01-21-2010, 12:48 PM

I might be interested in the other rolling body [pending price, pix and condition].

Thx!

*sharpie1972* · 01-19-2010, 08:34 PM

Drunkbus: Only fuel tank parts so far are the ones pictured. Rear strip is there, but not in great shape. Sharpie

drunkbus · 01-19-2010, 10:48 PM

Quote:

Originally Posted by sharpie1972

Drunkbus: Only fuel tank parts so far are the ones pictured. Rear strip is there, but not in great shape. Sharpie

How bad is the rear strip? As long as it's fairly straight and solid I don't care about the chrome. I just need it to hold the seal in place. I could also use the two vertical pieces that hold the tailgate seal as well.

tjsblazer · 01-19-2010, 11:26 PM

Hey Dennis,
What about speaker parts brkts, grill, etc. Also oem Antenna assy (base, mast. wire)
What about front grill outer condition?
Thanks, Jeff.

**wancosc356** · 01-19-2010, 08:45 PM

Cant tell from the pic, but what kind of shape is the tailgate in?

*sharpie1972* · 01-19-2010, 08:58 PM

Wancosc356: Dent near the bottom under letters. Probably not worth shipping. Sharpie

**wancosc356** · 01-19-2010, 09:04 PM

Oh ok. Thanks. Any chance you have a real nice one you wanna get rid of?

01-19-2010, 06:17 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1971 4x4 blazer parts Just picked up two 1971/72 4x4 blazers. I've only got one home so far but it was filled to the top with parts stripped off a third low mile blazer. I will start with a short list of parts and pictures and add more or start a new thread as I pull parts and get the second blazer home. I would like to keep the body shell and drivetrain complete on the first one, but will be parting the shell and running gear on the second one. One has a single wall top and one has the double wall. Please reply in thread. I will update order and sold status at the top of the thread. Thanks, Sharpie Brown buckets and console. Nice foam. Clean console. $650 shipped. Moved to Blazer section. Price dropped to $600 shipped. Utility buckets with correct brackets. $500 shipped. Moved to Blazer section. Price dropped to $450 shipped. Shorty Headman 4x4 headers. Nice shape. No dents. $100 shipped. Rear hatch. Nicest I've seen. No damage anywhere. $500 shipped. Moved to Blazer section. Sold to 71stroker. Thanks, Sharpie Wheel wells. Very clean. NO RUST. $150 shipped. Fuel fill spout, cover and vapor return. $100 shipped V8 tach dash. Clean original. Nice circuit. Bezels is shot. $250 shipped. 205 auto floor hump. Near perfect. NO RUST. $75 shipped 205 black shifter and knob. $65 shipped 205 chrome shifter and knob. part #3991932. $100 shipped. Sold to Budman K20. Shipped 1/22/10. 205 shifter boot and ring. $40 shipped White steel door panels. $75 shipped. Sold to 68 C-10 panel. Thanks, Sharpie Attached Images Last edited by sharpie1972; 02-01-2010 at 01:16 PM.

01-19-2010, 06:24 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts pics Attached Images

01-19-2010, 06:28 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts pics 3 Attached Images

01-19-2010, 06:30 PM	#5
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts pics 4 Attached Images

01-19-2010, 06:32 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts pics 5 Attached Images

01-19-2010, 06:26 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts pics 2 Attached Images

01-19-2010, 07:30 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1971 4x4 blazer parts hey Dennis, does this blazer have the part on the a/c that holds up the vacuum canister? Also, I am interested in a manual 4x4 large hump (prefer 1970), and rear bumper brackets from a blazer. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 01-19-2010 at 07:31 PM.

01-19-2010, 07:33 PM	#8
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: 1971 4x4 blazer parts Does this mean that you're selling this ochre colored truck as a roller?

01-19-2010, 07:43 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: 1971 4x4 blazer parts Dennis, blue lockout hubs that are decent? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-19-2010, 07:41 PM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Trevor, Not sure on the A.C. part. If it's the plastic canister it's bolted right to the housing. I will check the second blazer when I get it home. It also has the 4 speed hump you are after. I will put you first in line on it. There were bumper brackets in the deal, but I'm not sure what the blazer ones look like compared to truck 4x4. 1949gmc: I have local interest in the roller, but if it doesn't sell I will be listing it on the Board. Thanks, Sharpie

01-19-2010, 07:47 PM	#11
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1971 4x4 blazer parts Dennis, thanks for getting back with me. There should be a little curved, almost angle iron looking piece that the plastic canister is bolted to, and then that is bolted to the a/c fiberglass housing. I am looking for that bracket. Also, I will see about finding you a pic of rear bumper brackets for me. They have a extra brace welded or rivited to the inside of them. Kinda fugly looking, but that's what I am looking for as well. The hump I am looking for, I think has the transfer case hole more centered than off to the side. I am needing it for a 70' swb that I picked up recently. Someone screwed a 73+ style hump to the floor. I need to change cabs anyway, but I would like to find a correct hump. I am going yarding on Friday, so it might be put on hold until I see if I find something local hump wise. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-19-2010, 07:50 PM	#12
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1971 4x4 blazer parts Hey Dennis, I am also looking for a chrome sm465 shifter for a 4x4. Does that Blazer have one? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-19-2010, 07:49 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Eric, I only have Warns available now. I will put you first in line if the second blazer has factory hubs. Sharpie

01-19-2010, 07:52 PM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Trevor, the 4 speed blazer was the low miler that got stripped. There are more parts to come with the second one. I will let you know if there is a chrome 465. Sharpie

01-19-2010, 08:29 PM	#15
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: 1971 4x4 blazer parts Are you breaking the tub down? I need a drivers bed side and 6" of rear floor with cross member. I wonder what freight would be... intrested though. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

01-19-2010, 08:31 PM	#16
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 1971 4x4 blazer parts How about the filler neck from the gas tank? Rear carpet strip back near the tailgate?

01-19-2010, 08:32 PM	#17
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts I will let you know when I get the second blazer home and check it over. The drivers bedside on this one has previous bodywork. Sharpie

01-21-2010, 12:48 PM	#19
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,347	Re: 1971 4x4 blazer parts I might be interested in the other rolling body [pending price, pix and condition]. Thx!

01-19-2010, 08:34 PM	#20
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Drunkbus: Only fuel tank parts so far are the ones pictured. Rear strip is there, but not in great shape. Sharpie

01-19-2010, 11:26 PM	#22
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 1971 4x4 blazer parts Hey Dennis, What about speaker parts brkts, grill, etc. Also oem Antenna assy (base, mast. wire) What about front grill outer condition? Thanks, Jeff. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 01-19-2010 at 11:28 PM. Reason: add request

01-19-2010, 08:45 PM	#23
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 1971 4x4 blazer parts Cant tell from the pic, but what kind of shape is the tailgate in? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

01-19-2010, 08:58 PM	#24
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Wancosc356: Dent near the bottom under letters. Probably not worth shipping. Sharpie

01-19-2010, 09:04 PM	#25
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 1971 4x4 blazer parts Oh ok. Thanks. Any chance you have a real nice one you wanna get rid of? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

Register or Log In To remove these advertisements.