Let´s see them headers. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blukangoo · 09-09-2007, 09:01 AM

Post your header pics please.
I need to get some ideas about how they are routed and what to watch out for before I buy them.

Over the winter I will probably be getting some headers for my truck.
I thought since I need (want) to get a new exhaust I would just do the headers at the same time.

Thanks

71see10 · 09-09-2007, 09:27 AM

Here's a set I put on mine there hedman elites shorty, Got to love the ball flange,I dont really have good pics but If you want more I will take some!!

blukangoo · 09-11-2007, 04:03 PM

Thanks for the Pics.
Keep em comng!

68Stepbed · 09-11-2007, 08:04 PM

Here are the best shots I have of my Hedman Elite long tubes.

glock35ipsc · 09-12-2007, 10:06 AM

Quote:

Originally Posted by 71see10

Here's a set I put on mine there hedman elites shorty, Got to love the ball flange,I dont really have good pics but If you want more I will take some!!

Do you have a part number for those? Are they for the truck, or are they Camaro/Chevelle/????? headers?

blukangoo · 09-12-2007, 03:30 PM

Thanks again for the pictures.
I see there are alot of different shapes and forms.
I just hope I don´t have any problems with them when the time comes.

**Palf70Step** · 09-11-2007, 08:56 PM

These were on my parts truck, I think they are Dynomax.

Tied into so Flowmaster 40s and home made pipes.

724x4a/cchevy · 09-11-2007, 09:10 PM

Name: 2wd w-Headers (3).jpg
Views: 509
Size: 66.9 KB

Name: 2wd w-Headers (4).jpg
Views: 508
Size: 75.0 KB

This is one of the board member's trucks..dont know who though.
Justin

red69ss · 09-11-2007, 10:51 PM

heres mine summit brand block huggers ceramic coated only $200

boundstaffpress · 09-12-2007, 09:40 AM

Here is a set of dynomax 3/4 length I just dropped into my 72. No problems with an automatic.

68Stepbed · 09-12-2007, 07:56 PM

Glock, those are 69648

76bonanza · 09-12-2007, 11:29 PM

hey 68 stepbed how do those elite longtubes fit? How has the finish held up?
And do you have a part number?

Thanks

68Stepbed · 09-14-2007, 07:51 AM

Quote:

Originally Posted by 76bonanza

hey 68 stepbed how do those elite longtubes fit? How has the finish held up?
And do you have a part number?

Thanks

I don't remember the part # right now. I'll look it up later. I had to trim a couple spots on the frame, but mine was originally a 6 banger truck so the frames are slightly different. V8 trucks shouldn't have any clearance issues. I've only had mine in for a week now, but the finish has a 5 yr warranty.

Orange · 09-14-2007, 09:36 AM

These are the Dynomax Cyclone's that are offered from Summit with the JetHot coating. Have had them for about 7 years now and the coating is still great.

Name: Header1.jpg
Views: 263
Size: 85.6 KB

Name: Header1.jpg
Views: 263
Size: 85.6 KB

Name: Header2.jpg
Views: 260
Size: 77.0 KB

DLB

76bonanza · 09-14-2007, 10:48 AM

Orange I have a set of those but they will not clear the motor mounts on passenger side.

Orange · 09-14-2007, 02:38 PM

I had no problems with them. Just bought the ones designated for our trucks.

My dad has a set on his 86' 454 1-Ton truck as well.

BTW - 68step - Blue is looking SUWEEEEET!!!

DLB

daryn_24 · 09-18-2007, 07:15 PM

Thses are for a 3/4 tonne auto tranny....

blukangoo · 09-18-2007, 11:29 PM

Quote:

Originally Posted by daryn_24

Thses are for a 3/4 tonne auto tranny....

Thanks for the good picture.
I hope you didn´t take the engine out just to get the picture

Mrrilla · 09-19-2007, 09:01 AM

76bonanza · 09-18-2007, 07:19 PM

daryn what brand and part number are those?

09-09-2007, 09:01 AM	#1
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Let´s see them headers. Post your header pics please. I need to get some ideas about how they are routed and what to watch out for before I buy them. Over the winter I will probably be getting some headers for my truck. I thought since I need (want) to get a new exhaust I would just do the headers at the same time. Thanks __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-09-2007, 09:27 AM	#2
71see10 Worthless Join Date: Jun 2006 Location: LaFayette, GA Posts: 199	Re: Let´s see them headers. Here's a set I put on mine there hedman elites shorty, Got to love the ball flange,I dont really have good pics but If you want more I will take some!!

09-11-2007, 04:03 PM	#3
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Let´s see them headers. Thanks for the Pics. Keep em comng! __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-11-2007, 08:04 PM	#4
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Let´s see them headers. Here are the best shots I have of my Hedman Elite long tubes. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:42 PM.

09-12-2007, 03:30 PM	#6
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Let´s see them headers. Thanks again for the pictures. I see there are alot of different shapes and forms. I just hope I don´t have any problems with them when the time comes. __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-11-2007, 08:56 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Let´s see them headers. These were on my parts truck, I think they are Dynomax. Tied into so Flowmaster 40s and home made pipes. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 09-11-2007 at 08:59 PM.

09-11-2007, 09:10 PM	#8
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Let´s see them headers. This is one of the board member's trucks..dont know who though. Justin __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

09-11-2007, 10:51 PM	#9
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: Let´s see them headers. heres mine summit brand block huggers ceramic coated only $200 Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-12-2007, 09:40 AM	#10
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: Let´s see them headers. Here is a set of dynomax 3/4 length I just dropped into my 72. No problems with an automatic. Attached Images __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis Last edited by boundstaffpress; 09-12-2007 at 09:41 AM.

09-12-2007, 07:56 PM	#11
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Let´s see them headers. Glock, those are 69648 __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-12-2007, 11:29 PM	#12
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Let´s see them headers. hey 68 stepbed how do those elite longtubes fit? How has the finish held up? And do you have a part number? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

09-14-2007, 09:36 AM	#14
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Let´s see them headers. These are the Dynomax Cyclone's that are offered from Summit with the JetHot coating. Have had them for about 7 years now and the coating is still great. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

09-14-2007, 10:48 AM	#15
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Let´s see them headers. Orange I have a set of those but they will not clear the motor mounts on passenger side. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

09-14-2007, 02:38 PM	#16
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Let´s see them headers. I had no problems with them. Just bought the ones designated for our trucks. My dad has a set on his 86' 454 1-Ton truck as well. BTW - 68step - Blue is looking SUWEEEEET!!! DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

09-18-2007, 07:15 PM	#17
daryn_24 Registered User Join Date: Sep 2006 Location: Canada Posts: 16	Re: Let´s see them headers. Thses are for a 3/4 tonne auto tranny.... Attached Images



Register or Log In To remove these advertisements.

09-19-2007, 09:01 AM	#19
Mrrilla Registered User Join Date: Feb 2007 Location: Tucson,AZ Posts: 66	Re: Let´s see them headers. __________________ 1970 C10 SWB, 67 front clip, 3/5 drop, 350 TPI/700R4, Fiberglass tonneau cover, lots of body mods and.....a ford seat

09-18-2007, 07:19 PM	#20
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Let´s see them headers. daryn what brand and part number are those? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

Register or Log In To remove these advertisements.