Any tricks in changing sway bar bushings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 09-09-2003, 09:51 PM

Just noticed I'm missing at least one sway bar bushing on my 72 C20. So naturally I plan on replacing all of them. Can anyone shed some light on the best way to replace these bushings?

Any info is appreciated. Thanks guys.

Dusti · 09-09-2003, 10:33 PM

Make sure you clean the threads on your bolts good with a wire brush and use some penetrating oil of somekind like WD-40 or something better,those bolts can be hard to get off if they are not cleaned good.

BobW

09-09-2003, 09:51 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Any tricks in changing sway bar bushings? Just noticed I'm missing at least one sway bar bushing on my 72 C20. So naturally I plan on replacing all of them. Can anyone shed some light on the best way to replace these bushings? Any info is appreciated. Thanks guys.

09-09-2003, 10:33 PM	#2
Dusti Not Dusti,just Bob Join Date: Jul 2002 Location: Camas,Wa Posts: 247	Make sure you clean the threads on your bolts good with a wire brush and use some penetrating oil of somekind like WD-40 or something better,those bolts can be hard to get off if they are not cleaned good. BobW __________________ 72 cheyenne super 1/2ton 89 camaro



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.