CA Full bagged chassis and much more for sale

[superflysteiny]

-Well it pains me to do this but here goes 66 chassis 2.5 inch z boxed inner frame. Silver vein powder coat. Air ride tech upper and lower control arms. All new bushings and power steering and painted linkage. Custom powder coated blue belly pan for under the frame. All braided fuel lines are mounded with fuel pump. All half inch air line with blitz valves and dakota digital air ride controller very trick. Suicide doors rear triangulated rear kit powder coated blue. 5 gallon air ride tank powder coated blue. All new rebuilt rear end with billet cover of coarse the rear end is powder coated blue too. Two piece driveline. Cpp motor mounts for small block, 1960 bumper shaved with new brackets to push it back toward the core support. Cpp front disc brakes with powder coated rotors. It only needs rear disk brake kit. Every nut and bolt is new as are all the bearing. Also have the radiator aluminum 3 core that will come with the frame. also has new body mounts. If you want engine and trans it will be another 1800. $5800

-57 chevy dash with dakota digital gauges for 63-66 truck. Body work is complete and dash is in primer $800
-new chrome tilt idit column shift 60-77 c10 trucks. $300 sold
-hanks custom sheet metal step side bed with custom tail lights and electric tail gate and new fenders body work is done on the fenders 2000 firm.
-66 cab with shaved gas door, rear cab, and fire wall with cutom hood and inner fenders, new rockers and it is in sealer. 1000. comes with title.
- Billet specialties 18 by 4.5 gasser front wheels and 20 by 10 heritage rear wheels. I paid close to 6000 for these wheels 3500 takes them. This is a smoking deal front wheels were 3000 alone.
Billet specialties billet pully kit 800 comes with all brackets, ac, power steering pump and altinator. Its polished and the one in the picture $800

[superflysteiny]

[superflysteiny]

[superflysteiny]

[superflysteiny]

[Envy]

Will you ship me the column? I will take it. 32828 is my zip.
Posted via Mobile Device

[VA72C10]

How much for chrome tilt Shipped to me? What wiring connector does it have?

[superflysteiny]

Originally Posted by VA72C10

How much for chrome tilt Shipped to me? What wiring connector does it have?

Stock connector I believe but dont hold me to it

[superflysteiny]

Va72c10 has first dibs if he wants it but I need your zip

[VA72C10]

I'd love to have the whole project. That's an absolute steal especially the cab, dash, and bed!!!

Best wishes on the sale.

DO you still have the smoothies (5 lug -5x5?) Is it a set or just two and if selling...how much and backspacing (and with or without tires)

Thanks

[lolife99]

What's the specs on the engine and trans?

[superflysteiny]

Originally Posted by lolife99

What's the specs on the engine and trans?

Motor is a rebuild 350. 30 over with cast iorn world heads and valve train. Decent cam with forged piston and steel crank. All gaskets are new. The motor is new and was build by motor machine in Carmichael ca. The built the motor in my 72 cheyenne.

[lolife99]

Backspacing and bolt pattern on the 20x10 BS Heritage wheels?
Also,... do you still have the BS V-Trac for the engine?

[superflysteiny]

Originally Posted by lolife99

Backspacing and bolt pattern on the 20x10 BS Heritage wheels?
Also,... do you still have the BS V-Trac for the engine?

800 for the v track. little nick on the main bracket can be polished out. Never used just mounted. I will have look up the back spacing on the wheels. Think the lip is 2 and half inches. The pattern is 5 on 5

[superflysteiny]

Originally Posted by lolife99

Backspacing and bolt pattern on the 20x10 BS Heritage wheels?
Also,... do you still have the BS V-Trac for the engine?

Just wanted to clarify the engine and v trac system are being sold separate. I can make someone a package deal on the engine trans and motor if they are interested in it
Posted via Mobile Device

[superflysteiny]

6.0 backspacing
Posted via Mobile Device

[VA72C10]

23112 zip. Thanks!

[superflysteiny]

Originally Posted by VA72C10

23112 zip. Thanks!

27.70
Posted via Mobile Device

[ScottH]

wow, awesome project, sorry u have to sell.

Can u tell me where u got the valve covers?

Thanks

[superflysteiny]

Originally Posted by ScottH

wow, awesome project, sorry u have to sell.

Can u tell me where u got the valve covers?

Thanks

Valve covers are billetspecialties
Posted via Mobile Device

[64shortc10]

How much for the radiator? I can pick it up! No shipping. Thanks
Tony from Norcal
Posted via Mobile Device

[superflysteiny]

Originally Posted by 64shortc10

How much for the radiator? I can pick it up! No shipping. Thanks
Tony from Norcal
Posted via Mobile Device

150
Posted via Mobile Device

[superflysteiny]

Here are the pictures of the dash. It will come with the stock 57 bezel not in the pic. The body work is done on the dash. The gauges come with the two different colors of lenses blue and teal. I also have the gauge bezels I will through in that are billet. I have all the billet defroster vents and ac heater vents but they will be extra. Total there is a 100 hrs of work in this dash. The gauges were 800 and the billet bezels were 150. Hope this helps

[superflysteiny]

I will part the suspension an the air ride. I will sell the rear for 1800. That will include rear end all new gears, bearings and seals, suicidedoors rear triangulated rear kit with bags and shocks.
Posted via Mobile Device

[Envy]

What all do you have for steering parts and how much?
Posted via Mobile Device