|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-08-2015, 10:09 PM
|
#1 |
|
Registered User
 Join Date: May 2005
Location: Reading, Kansas
Posts: 628
|
250 to 292 engine swap
The 292 I am going to put in my 66 was a 4 speed and I am going to mount it to a Powerglide. does the flex plate mount the same way? It looks different on 292 and the bolts need to be bigger. Has anyone done this before and have any advice? thanks
|
|
|
|
05-08-2015, 10:14 PM
|
#2 | |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,194
|
Re: 250 to 292 engine swap
Quote:
|
|
|
|
|
|
05-10-2015, 11:59 AM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: Dallas, GA
Posts: 1,497
|
Re: 250 to 292 engine swap
On some 292's the flywheel/flex plate bolts are 1/2" instead of 7/16".
http://67-72chevytrucks.com/vboard/s...d.php?t=637533 |
|
|
|
|
05-10-2015, 05:35 PM
|
#4 |
|
Registered User
Join Date: May 2005
Location: Reading, Kansas
Posts: 628
|
Re: 250 to 292 engine swap
Thanks for the help, guys. The bolts for the crank are bigger they are 1/2 in / 20 treads bought new and they fit nicely. Will re-drill flex plate to except new bolts. The bolt heads are thicker but should not be an issue.
|
|
|
|
|
05-10-2015, 07:04 PM
|
#5 |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: 250 to 292 engine swap
you also require a different passenger side eng perch. that is the only one that is different from the rest in case you are not aware
ron |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
