CA Parting out 69 GMC 1/2 ton truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeremiah king · 02-25-2013, 06:01 PM

I just picked this truck up and are going to start parting it out as soon as anyone needs anything.
Let me know what you need and I can get you some prices as well as pics
I do not have a list of prices to post at this point because I want to see what parts are going to be needed first, as far as where to start. I saw there was a thread saying "not to hog the parts board with individual listings" so I thought this was a good way to make sure I wasn't doing that.
thanks for checking out our thread. Jenn (Jeremiah's wife)

*Maximuz* · 02-25-2013, 06:07 PM

How much for glovebox emblem? Can u get me a close up pic?
Posted via Mobile Device

jeremiah king · 02-25-2013, 09:51 PM

Quote:

Originally Posted by Maximuz

How much for glovebox emblem? Can u get me a close up pic?
Posted via Mobile Device

I don't want to sell just the emblem on this one. The box is to nice. thanks Jenn

**uncle** · 02-25-2013, 06:21 PM

Does it have engine?
Posted via Mobile Device

jeremiah king · 02-25-2013, 06:36 PM

Nope, no engine. It was a small block truck originally.

72K20SUBN · 02-25-2013, 07:31 PM

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

jeremiah king · 02-25-2013, 07:41 PM

Quote:

Originally Posted by 72K20SUBN

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

I probably have it in a few cabs out here, Let me see what I got for you. Jenn

Undone · 02-25-2013, 08:04 PM

Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

jeremiah king · 02-26-2013, 09:37 PM

Quote:

Originally Posted by Undone

Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

The Visors are nice, but the passenger side one has a small crease on it and feels like the layers inside are seperated. Does that make sense, they look nice and the clips are nice, but the ones feels different. $30 shipped on the visors and clips
The Armrests are not available and let me know about the dash pad, cause there are a few people interested in it.

Undone · 02-26-2013, 10:04 PM

Quote:

Originally Posted by jeremiah king

The Visors are nice, but the passenger side one has a small crease on it and feels like the layers inside are seperated. Does that make sense, they look nice and the clips are nice, but the ones feels different. $30 shipped on the visors and clips
The Armrests are not available and let me know about the dash pad, cause there are a few people interested in it.

I"ll pass, Thanks

Oddfire · 02-25-2013, 08:10 PM

I'm interested in the following items: armrests, door panel hardware if usable,
glove box & mounting hardware, shift ind & pointer, ac ball & center vents &
hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71

Longhorn

jeremiah king · 02-26-2013, 01:34 PM

Quote:

Originally Posted by Oddfire

I'm interested in the following items: armrests, door panel hardware if usable,
glove box & mounting hardware, shift ind & pointer, ac ball & center vents &
hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71

Longhorn

Arm rests are not available.

jeremiah king · 03-01-2013, 07:52 PM

Quote:

Originally Posted by Oddfire

I'm interested in the following items: armrests, door panel hardware if usable,
glove box & mounting hardware, shift ind & pointer, ac ball & center vents &
hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71

Longhorn

Here is a picture of another center AC vent I have. The glove box and hardware are still available on this truck also. Jenn

Oddfire · 03-01-2013, 09:46 PM

Jenn: If you look at the first pic you'll see the black plastic piece with the hole in it. The 2nd pic shows where another one is suppose to be. These black pieces hold the center vent in the frame. I'm wondering if you have
a broken center vent that this piece can be taken off of or do i have to get the whole vent assy? Jamie 71

Longhorn

jeremiah king · 03-01-2013, 07:49 PM

Quote:

Originally Posted by 72K20SUBN

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

Here is what I have.

noch · 02-25-2013, 08:08 PM

how much for the hood GMC emblem? 72205.

**N2TRUX** · 02-25-2013, 08:21 PM

Your going to need to price some of the parts to get this in compliance.

Oddfire · 02-25-2013, 08:26 PM

2nd in line for arm rests.

jeremiah king · 02-25-2013, 08:43 PM

Quote:

Originally Posted by N2TRUX

Your going to need to price some of the parts to get this in compliance.

Thank you for the message, I am working on it! Jenn

**N2TRUX** · 02-26-2013, 10:57 AM

Quote:

Originally Posted by jeremiah king

Thank you for the message, I am working on it! Jenn

Thank you Ma'am...

bollybib · 02-26-2013, 11:56 AM

If the defrost vents are saddle, I'm interested. Also the SB AC fan shroud if it has one. And the plastic grommets that insert into the frame to protect the parking brake cable where it passes through.

jeremiah king · 02-26-2013, 01:30 PM

Quote:

Originally Posted by bollybib

If the defrost vents are saddle, I'm interested. Also the SB AC fan shroud if it has one. And the plastic grommets that insert into the frame to protect the parking brake cable where it passes through.

Hey Jim, How's it going? The defrost vents are shot and no fan shroud, I am sure I have the grommet you are talking about. Let me check today. Also do you still need those extra brake lines or did you fab them yourself? let me know. Jenn

jeremiah king · 02-26-2013, 01:28 PM

Quote:

Originally Posted by N2TRUX

Thank you Ma'am...

No problem, anytime!

1972K20 · 02-25-2013, 08:33 PM

How is that tailgate? It looks like it's pushed in a little?

jeremiah king · 02-25-2013, 08:45 PM

Quote:

Originally Posted by 1972K20

How is that tailgate? It looks like it's pushed in a little?

You are correct, although it is worse than the picture shows. Thanks for asking. Jenn

02-25-2013, 06:01 PM	#1
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Parting out 69 GMC 1/2 ton truck I just picked this truck up and are going to start parting it out as soon as anyone needs anything. Let me know what you need and I can get you some prices as well as pics I do not have a list of prices to post at this point because I want to see what parts are going to be needed first, as far as where to start. I saw there was a thread saying "not to hog the parts board with individual listings" so I thought this was a good way to make sure I wasn't doing that. thanks for checking out our thread. Jenn (Jeremiah's wife) Attached Images __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

02-25-2013, 06:07 PM	#2
Maximuz Account Suspended Join Date: Jan 2013 Location: California Posts: 132	Re: Parting out 69 GMC 1/2 ton truck How much for glovebox emblem? Can u get me a close up pic? Posted via Mobile Device

02-25-2013, 06:21 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Parting out 69 GMC 1/2 ton truck Does it have engine? Posted via Mobile Device

02-25-2013, 06:36 PM	#5
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting out 69 GMC 1/2 ton truck Nope, no engine. It was a small block truck originally. __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

02-25-2013, 07:31 PM	#6
72K20SUBN Registered User Join Date: Feb 2008 Location: Boise, ID. Posts: 29	Re: Parting out 69 GMC 1/2 ton truck Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated. Thanks. __________________ 72K20SUBN: - '72 Suburban K20 - '72 Cheyenne K20 - '71 Custom20 Deluxe 4x4 - '63 Pontiac Bonneville 2Dr HT

02-25-2013, 08:04 PM	#8
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Parting out 69 GMC 1/2 ton truck Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

02-25-2013, 08:10 PM	#11
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 69 GMC 1/2 ton truck I'm interested in the following items: armrests, door panel hardware if usable, glove box & mounting hardware, shift ind & pointer, ac ball & center vents & hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71 Longhorn

03-01-2013, 09:46 PM	#14
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 69 GMC 1/2 ton truck Jenn: If you look at the first pic you'll see the black plastic piece with the hole in it. The 2nd pic shows where another one is suppose to be. These black pieces hold the center vent in the frame. I'm wondering if you have a broken center vent that this piece can be taken off of or do i have to get the whole vent assy? Jamie 71 Longhorn Attached Images

02-25-2013, 08:08 PM	#16
noch Registered User Join Date: Jan 2013 Location: Little Rock AR Posts: 18	Re: Parting out 69 GMC 1/2 ton truck how much for the hood GMC emblem? 72205.

02-25-2013, 08:21 PM	#17
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Parting out 69 GMC 1/2 ton truck Your going to need to price some of the parts to get this in compliance. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-25-2013, 08:26 PM	#18
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 69 GMC 1/2 ton truck 2nd in line for arm rests.

02-26-2013, 11:56 AM	#21
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: Parting out 69 GMC 1/2 ton truck If the defrost vents are saddle, I'm interested. Also the SB AC fan shroud if it has one. And the plastic grommets that insert into the frame to protect the parking brake cable where it passes through. __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

02-25-2013, 08:33 PM	#24
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: Parting out 69 GMC 1/2 ton truck How is that tailgate? It looks like it's pushed in a little?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.