|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-17-2008, 08:09 AM
|
#1 |
|
Registered User
 Join Date: Jan 2008
Location: Red Lodge Montana
Posts: 240
|
Wheel fitment- 15x10 with 4" backspacing?
Will a 15x10 with a 4" backspacnig fit under the rear with a 275-60-15? I found some sweet wheels in that size and WANT them. thanks guys
|
|
|
|
02-17-2008, 08:41 AM
|
#2 |
|
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Re: Wheel fitment- 15x10 with 4" backspacing?
Pretty sure my 10's have 4" BS. I am running 275/60's & a 6" drop with no problems...
Last edited by corn; 10-10-2009 at 12:16 PM. |
|
|
|
|
02-17-2008, 10:26 AM
|
#3 |
|
67-72 Addicted
Join Date: Oct 2007
Location: Guelph Ontario
Posts: 256
|
Re: Wheel fitment- 15x10 with 4" backspacing?
Anyone know if 15X10 4 1/2" back spacing will fit? foung some nice ones on http://wheelvintiques.com/shopsite_s...ml/page35.html
|
|
|
|
|
02-17-2008, 11:24 AM
|
#4 |
|
Registered User
Join Date: Apr 2007
Location: washington
Posts: 95
|
Re: Wheel fitment- 15x10 with 4" backspacing?
i also have 15x10 with 275/60 tires and they fit with no rubing, and i think the only way a 4.5 bs will would fit is if you mini tub it to the frame, but im no expert!
Last edited by truckguy_69; 02-17-2008 at 11:26 AM. |
|
|
|
|
02-17-2008, 11:44 AM
|
#5 |
|
Registered User
Join Date: Oct 2006
Location: Arizona
Posts: 835
|
Re: Wheel fitment- 15x10 with 4" backspacing?
Here is a 10 inch rim with 285's and 4.5 backspacing however, I have the early narrower 6 lug 12 bolt. About a 1/2 inch clearance from the bed. Hope this helps.
__________________
67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094 Last edited by whatnow123; 02-17-2008 at 11:46 AM. |
|
|
|
|
02-18-2008, 10:18 AM
|
#6 |
|
67-72 Addicted
Join Date: Oct 2007
Location: Guelph Ontario
Posts: 256
|
Re: Wheel fitment- 15x10 with 4" backspacing?
so a 15x10 4.5" back spacing wont fit right under my 71 1/2 ton fleet?
|
|
|
|
|
02-18-2008, 01:15 PM
|
#7 |
|
Registered User
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
Re: Wheel fitment- 15x10 with 4" backspacing?
Here's mine.....15x10's with 4" bs and 275/60's
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank -  My Build Thread |
|
|
|
|
02-19-2008, 04:18 AM
|
#8 |
|
The Engine Whisperer
Join Date: Sep 2006
Location: Ohio
Posts: 770
|
Re: Wheel fitment- 15x10 with 4" backspacing?
My 14" wide with 8.75" back spacing do not yet the frame
I did have to trim the bed floor and increase the tub size This is on a 698 rearend which is a little narrower than the 71 and up rears |
|
|
|
|
02-19-2008, 04:50 AM
|
#9 |
|
Registered User
Join Date: Feb 2005
Location: Texas
Posts: 581
|
Re: Wheel fitment- 15x10 with 4" backspacing?
Here is mine 15x10 on the rear w/ 295-50-15 an 265 60 15 w/15x8 on the front
__________________
1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
