Clyde's '65 BBW "Bonnie" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bumwine · 02-17-2016, 10:36 AM

Ok so I had started a build thread for this truck but some things have changed and wanted to start over on my personal account. So here we go again

I picked up this '65 a little over a month ago. She started out her life as a Doran Chevrolet service truck. She's got a 283 that's seems fairly strong. I will run it for now until I get to that stage. Eventually she will be bagged with the works but for now. Its going to be static drop with big brakes, rims, new wiring, etc

bumwine · 02-17-2016, 10:38 AM

I have already done some spray paint removal

bumwine · 02-17-2016, 10:41 AM

Also knocked down some surface rust and got a nice patina look. I plan on painting her down the road but for now this will have to do

I also have a full time "helper" it will be his truck one day

bumwine · 02-17-2016, 10:56 AM

replaced the ball joints and got the hotchkis springs installed it's a 4/6 drop with 2" cpp drop spindles. Also rebuilt the rearend a bit and installed the new axles. Started on the brakes too

bumwine · 02-17-2016, 10:59 AM

I have the rims but I'm still have to get tires but not sure what route I want to go yet. Went with 17x8 in the front and 17x9 in the rear

62stepside longbox · 02-17-2016, 12:17 PM

Nice truck! Digging the patina

Bomp · 03-13-2016, 11:40 AM

Do you have the part number for that new master?
Like what I'm seeing.
Both feet on board, Sub'd

bumwine · 03-13-2016, 11:44 AM

Quote:

Originally Posted by Bomp

Do you have the part number for that new master?
Like what I'm seeing.
Both feet on board, Sub'd

I got it from the guys at az pro performance. Great guys and excellent customer service

http://www.azproperformance.com/Wilw...261-13269.html

ChrisDollins · 03-15-2016, 11:34 PM

Love the truck man. The chrome cragars look right at home.

Chris

bumwine · 03-16-2016, 12:59 AM

Quote:

Originally Posted by ChrisDollins

Love the truck man. The chrome cragars look right at home.

Chris

Thanks! Now if I could get some rubber on them and set her back on the ground

bumwine · 03-18-2016, 12:00 AM

I came across a intake and carb for cheap so I decided the engine could use a make over

Paul Y · 03-18-2016, 03:25 AM

Very nice Sir.

P.

**MisterC** · 03-19-2016, 01:09 AM

I'm loving the direction that you're heading on this. Well played!

Bomp · 03-19-2016, 09:35 AM

Level Up
Steps in the right direction. Diggin' it

bumwine · 03-19-2016, 09:46 AM

Thanks everyone! The shock relocation brackets showed up yesterday.

bumwine · 03-20-2016, 06:37 PM

Knocked out the front shock relocation today. Man these Cpp brackets are a pain with the cab on

step65 · 03-20-2016, 08:00 PM

Looking forward to seeing the stance with tires on the ground. The cragers look great.

bumwine · 03-20-2016, 08:17 PM

Quote:

Originally Posted by step65

Looking forward to seeing the stance with tires on the ground. The cragers look great.

You and me both! Lol I really have no clue how it's going to sit. Hopefully I like it

gringoloco · 04-10-2016, 08:04 AM

Nice parts and wheels. Like where this one is headed...

SKT · 04-10-2016, 09:17 AM

.
.

Wheel and brake set-up looks great!

With that outstanding natural patina, I certainly wouldn't paint it though. They only wear their original paint once. That is years and years of real character proudly displayed.

Looking forward to following along.

.
.

bumwine · 04-10-2016, 09:20 AM

Thanks everyone! No real progress lately. Just waiting on some material to come in so I can run new brake lines. Also have been waiting to hear back on a 400 sbc

69short · 04-10-2016, 09:59 AM

Looking great. Nice build

bumwine · 05-15-2016, 11:58 PM

Was able to get some work done this weekend. Intake and carb are back on.
Bench bled the master, all the brake lines installed, and bled the entire system. The engine bay still needs a lot of work but it will do for now

siggyfreud · 05-16-2016, 12:14 AM

Master Cyl looks great. That's the one I just received. I'm excited to install it

. Did your prop valve have 3 output ports? Looks like two front, 1 rear? Guess we don't have to do a splitter for the fronts of that's the case.

bumwine · 05-16-2016, 07:43 AM

Quote:

Originally Posted by siggyfreud

Master Cyl looks great. That's the one I just received. I'm excited to install it

. Did your prop valve have 3 output ports? Looks like two front, 1 rear? Guess we don't have to do a splitter for the fronts of that's the case.

Yes sir. I ran the fronts separate. I the rear down the driver side frame rail and split it at the rear differential. So pretty much completely opposite from the factory lines ha ha

02-17-2016, 10:36 AM	#1
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Clyde's '65 BBW "Bonnie" Ok so I had started a build thread for this truck but some things have changed and wanted to start over on my personal account. So here we go again I picked up this '65 a little over a month ago. She started out her life as a Doran Chevrolet service truck. She's got a 283 that's seems fairly strong. I will run it for now until I get to that stage. Eventually she will be bagged with the works but for now. Its going to be static drop with big brakes, rims, new wiring, etc

02-17-2016, 10:38 AM	#2
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I have already done some spray paint removal

02-17-2016, 10:41 AM	#3
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Also knocked down some surface rust and got a nice patina look. I plan on painting her down the road but for now this will have to do I also have a full time "helper" it will be his truck one day

02-17-2016, 10:56 AM	#4
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" replaced the ball joints and got the hotchkis springs installed it's a 4/6 drop with 2" cpp drop spindles. Also rebuilt the rearend a bit and installed the new axles. Started on the brakes too

02-17-2016, 10:59 AM	#5
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I have the rims but I'm still have to get tires but not sure what route I want to go yet. Went with 17x8 in the front and 17x9 in the rear

02-17-2016, 12:17 PM	#6
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: Clyde's '65 BBW "Bonnie" Nice truck! Digging the patina __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

03-13-2016, 11:40 AM	#7
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Clyde's '65 BBW "Bonnie" Do you have the part number for that new master? Like what I'm seeing. Both feet on board, Sub'd

03-15-2016, 11:34 PM	#9
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: Clyde's '65 BBW "Bonnie" Love the truck man. The chrome cragars look right at home. Chris __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

03-18-2016, 12:00 AM	#11
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I came across a intake and carb for cheap so I decided the engine could use a make over

03-18-2016, 03:25 AM	#12
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 936	Re: Clyde's '65 BBW "Bonnie" Very nice Sir. P.

03-19-2016, 01:09 AM	#13
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Clyde's '65 BBW "Bonnie" I'm loving the direction that you're heading on this. Well played! __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

03-19-2016, 09:35 AM	#14
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Clyde's '65 BBW "Bonnie" Level Up Steps in the right direction. Diggin' it

03-19-2016, 09:46 AM	#15
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Thanks everyone! The shock relocation brackets showed up yesterday.

03-20-2016, 06:37 PM	#16
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Knocked out the front shock relocation today. Man these Cpp brackets are a pain with the cab on

03-20-2016, 08:00 PM	#17
step65 Registered User Join Date: Aug 2013 Location: Wildomar Ca Posts: 274	Re: Clyde's '65 BBW "Bonnie" Looking forward to seeing the stance with tires on the ground. The cragers look great.



Register or Log In To remove these advertisements.

04-10-2016, 08:04 AM	#19
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Clyde's '65 BBW "Bonnie" Nice parts and wheels. Like where this one is headed... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-10-2016, 09:17 AM	#20
SKT Registered User Join Date: Oct 2014 Location: Location: Posts: 8,231	Re: Clyde's '65 BBW "Bonnie" . . Wheel and brake set-up looks great! With that outstanding natural patina, I certainly wouldn't paint it though. They only wear their original paint once. That is years and years of real character proudly displayed. Looking forward to following along. . .

04-10-2016, 09:20 AM	#21
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Thanks everyone! No real progress lately. Just waiting on some material to come in so I can run new brake lines. Also have been waiting to hear back on a 400 sbc

04-10-2016, 09:59 AM	#22
69short Registered User Join Date: May 2012 Location: DeKalb, MO Posts: 508	Re: Clyde's '65 BBW "Bonnie" Looking great. Nice build __________________ -Justin '69 SWB \| Zoie Jane \| Porterbuilt, LQ9, 20"/22" wheels

05-15-2016, 11:58 PM	#23
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Was able to get some work done this weekend. Intake and carb are back on. Bench bled the master, all the brake lines installed, and bled the entire system. The engine bay still needs a lot of work but it will do for now

05-16-2016, 12:14 AM	#24
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Clyde's '65 BBW "Bonnie" Master Cyl looks great. That's the one I just received. I'm excited to install it . Did your prop valve have 3 output ports? Looks like two front, 1 rear? Guess we don't have to do a splitter for the fronts of that's the case. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

Register or Log In To remove these advertisements.