You Guys Wanna See Patina...? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TonyJohnson · 04-24-2008, 09:24 PM

Not mine...

http://denver.craigslist.org/car/653205870.html

Joe67 · 04-24-2008, 10:40 PM

I wouldn't call it Patina but it would be a nice project for sure

68 short step · 04-24-2008, 10:45 PM

pantina= cool old looking driver
car in link= rusted junk

its a project tho....could be cool with a fuel injected hemi tho.

lowrollin70gmc · 04-24-2008, 11:06 PM

Somebody stole the wheels and drums!!!

Nice rod project, tune her up and cruise.

ratrod67 · 04-24-2008, 11:58 PM

The dash almost looks like it has a woodgrain finish. Not sure the square and round gauges look too good together.

bpmcgee · 04-25-2008, 12:10 AM

Wow, $3100 for that?? Is there something that I missed? Say a stack of gold bars in the trunk?

B

ed2552 · 04-25-2008, 02:05 AM

Quote:

Originally Posted by bpmcgee

Wow, $3100 for that?? Is there something that I missed? Say a stack of gold bars in the trunk?

B

Agreed

streetstar · 04-25-2008, 02:09 AM

that would not even be worth $3100 if it was a '54 Chevy (although a '49 or 50 merc in that condition might go for that much or more)

68C15 · 04-25-2008, 04:34 AM

I just did some work on a very similar car today. a guy has a 46 Plymouth Special Delux P15. the weird part is its his winter car.
the dash is painted wood grain as are the inside window trim pieces.

lowrollin70gmc · 04-25-2008, 05:06 AM

I'ld say it's worth it. All the glass is there, all chrome and trim is intact and decent, messed up yet repairable hood side, little surface rust, but mostly solid base for a street rodder, beats $3100 in body work to a rusted hulk you get for free. Go price a genuine 32 ford and you'll see this thing is cheap!

*Shane* · 04-25-2008, 05:10 AM

Quote:

Originally Posted by lowrollin70gmc

I'ld say it's worth it. All the glass is there, all chrome and trim is intact and decent, messed up yet repairable hood side, little surface rust, but mostly solid base for a street rodder, beats $3100 in body work to a rusted hulk you get for free. Go price a genuine 32 ford and you'll see this thing is cheap!

Sorry, but this ain't no where close to being compared to a '32 Ford ...

lowrollin70gmc · 04-25-2008, 06:04 AM

Quote:

Originally Posted by Shane

Sorry, but this ain't no where close to being compared to a '32 Ford ...

But it is 20% of a '32. ($15500 for a legit '32 complete with drivetrain and trim). Although, I just paid way less than $3100 for my daily driver '67, so ya'll do have valid points.

And street rodders talk with checkbooks, not always common sense. I like to think most of us here are hot rodders, like to make it ourselves as cheap as we can and as best as we can. I'd rather go find one in a field myself, get some adventure that way!

Hoods69BadBowTie · 04-25-2008, 05:07 AM

Wow defiantly would be a sweet project but they are trying to get way too much for it in my opinion.

weasel29gm · 04-25-2008, 05:59 AM

Not a '32 but a decent price for a project, anything solid is 2-3k.

**special-K** · 04-25-2008, 06:25 AM

Welcome to the world of street rods.That`s an obviously solid and straight body on a complete car.Paint stripper is expensive,too.You`ll save that expense.

Fraser Beatty · 04-25-2008, 10:45 PM

$3100 doesn't sound too bad, for around my area anyway.

rod86 · 04-26-2008, 01:51 PM

thats pretty good, cant see any rust holes just surface, that would come up real nice... over here in oz you would pay more than that for a body without motor, glass and with more rust holes...

04-24-2008, 09:24 PM	#1
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	You Guys Wanna See Patina...? Not mine... http://denver.craigslist.org/car/653205870.html __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --

04-24-2008, 10:40 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: You Guys Wanna See Patina...? I wouldn't call it Patina but it would be a nice project for sure __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-24-2008, 10:45 PM	#3
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: You Guys Wanna See Patina...? pantina= cool old looking driver car in link= rusted junk its a project tho....could be cool with a fuel injected hemi tho. Last edited by 68 short step; 04-24-2008 at 10:45 PM.

04-24-2008, 11:06 PM	#4
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: You Guys Wanna See Patina...? Somebody stole the wheels and drums!!! Nice rod project, tune her up and cruise. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

04-24-2008, 11:58 PM	#5
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: You Guys Wanna See Patina...? The dash almost looks like it has a woodgrain finish. Not sure the square and round gauges look too good together.

04-25-2008, 12:10 AM	#6
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Re: You Guys Wanna See Patina...? Wow, $3100 for that?? Is there something that I missed? Say a stack of gold bars in the trunk? B

04-25-2008, 02:09 AM	#8
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: You Guys Wanna See Patina...? that would not even be worth $3100 if it was a '54 Chevy (although a '49 or 50 merc in that condition might go for that much or more) __________________ Are you retired too? Nonsense! I'm in my prime

04-25-2008, 04:34 AM	#9
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: You Guys Wanna See Patina...? I just did some work on a very similar car today. a guy has a 46 Plymouth Special Delux P15. the weird part is its his winter car. the dash is painted wood grain as are the inside window trim pieces.

04-25-2008, 05:06 AM	#10
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: You Guys Wanna See Patina...? I'ld say it's worth it. All the glass is there, all chrome and trim is intact and decent, messed up yet repairable hood side, little surface rust, but mostly solid base for a street rodder, beats $3100 in body work to a rusted hulk you get for free. Go price a genuine 32 ford and you'll see this thing is cheap! __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST Last edited by lowrollin70gmc; 04-25-2008 at 05:07 AM.

04-25-2008, 05:07 AM	#13
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: You Guys Wanna See Patina...? Wow defiantly would be a sweet project but they are trying to get way too much for it in my opinion. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

04-25-2008, 05:59 AM	#14
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,093	Re: You Guys Wanna See Patina...? Not a '32 but a decent price for a project, anything solid is 2-3k. __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

04-25-2008, 06:25 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: You Guys Wanna See Patina...? Welcome to the world of street rods.That`s an obviously solid and straight body on a complete car.Paint stripper is expensive,too.You`ll save that expense. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-25-2008, 10:45 PM	#16
Fraser Beatty Registered User Join Date: Sep 2007 Location: Sarnia, Ontario Posts: 571	Re: You Guys Wanna See Patina...? $3100 doesn't sound too bad, for around my area anyway. __________________ 1961 GMC 930- SOLD 1979 GMC C35 Single Wheel Camper Special- SOLD 1980 GMC C25 Camper Special- SOLD 1983 Chevrolet C10- SOLD 1983 Chevrolet Camaro- SOLD 1985 GMC C1500 (Dad's truck) 1985 GMC C3500 Crew Cab Dually- TRADED FOR 61 GMC 1997 Dodge Ram 1500 V6 Shortbox- Daily Driver

04-26-2008, 01:51 PM	#17
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: You Guys Wanna See Patina...? thats pretty good, cant see any rust holes just surface, that would come up real nice... over here in oz you would pay more than that for a body without motor, glass and with more rust holes... __________________ rod 86 chevy c10 silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.