VA Parting this 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PGSigns** · 09-08-2015, 08:11 PM

Picked this up last week to get some things we needed for a couple of projects. Bed was about the only usable body part. I has a new home. Going to post pics as I pull stuff off. If there is something you want let me know and I will look to see if it is there.
Jimmy

**PGSigns** · 09-08-2015, 08:14 PM

Here is the first round of parts. Prices do not include shipping unless noted.
Pretty nice complete grill has a few dings but overall very good. Complete with the wiring and the bolts to hold it on the truck. $175 SOLD to Jamie

62 bigwindow · 09-08-2015, 08:18 PM

any damage to the grille?
interested in the trailer

**PGSigns** · 09-08-2015, 08:21 PM

1. West coast JR mirrors. Has one replacement mirror and could use new acorn nuts. Includes the special hardware for the top of the door. $50 Sold to aotte1
2. Signal stat flasher unit complete and in nice shape. It does power up. $85 SOLD
3. Radio delete plate with the clips. $20 Shipped Sold to 62 bigwindow
4. Set of sail panels. little dinged up but not bad. $40 SOLD

62 bigwindow · 09-08-2015, 08:26 PM

I will take the radio delete

**PGSigns** · 09-08-2015, 08:26 PM

wiring harness from under the dash and firewall to the horn relay. Both in very good condition with just one plug that has some issues. The plug for the high beam switch looks like it got hot. Truck has non gauge dash, two speed wipers with washer and deluxe heater. I have the dash and the heater controls just need to clean them up and check the condition. SOLD

**PGSigns** · 09-08-2015, 08:30 PM

Jamie the delete plate is yours. Grill is pretty good two small dings that are barely visible in the pictures. I can take close ups if you need them.
Jimmy

62 bigwindow · 09-08-2015, 08:31 PM

interested in shipping the grille?
or are you looking for anything we can trade on

**DPowers** · 09-08-2015, 08:34 PM

spear points on fender trim?

**PGSigns** · 09-08-2015, 08:39 PM

DP I will look to see if they are both good. Jamie I need a 67 to 72 complete rear fleetside bumper and brackets for my 65.
Jimmy

**DPowers** · 09-08-2015, 08:45 PM

[QUOTE=PGSigns;7302713]DP I will look to see if they are both good.
ok let me know- trim pieces also if usable

62 bigwindow · 09-08-2015, 08:40 PM

chrome I assume?
I might be able to locate one

jdl71 · 09-08-2015, 09:01 PM

How much for the harness? What are you doing with the steel wheels? Any hubcaps?

Cypher · 09-08-2015, 09:57 PM

I would like the side moldings if available?

niner1962 · 09-08-2015, 10:32 PM

how about a title and some numbers?

duallyjams · 09-08-2015, 11:07 PM

interested on info on the steering column

put me 3rd in line on the front spears and fender trim

**Captainfab** · 09-08-2015, 11:20 PM

Interested in the grill if 62 bigwindow passes.

**aotte1** · 09-08-2015, 11:59 PM

I will take the west coast mirrors, and second on wire harness if jDl Passes.

Other Parts if available:

1). the two speed wiper washer motor assembly including switch and wiper arms , 2).the heater dash metal duct work and hoses, and 3). PS pump and pulley along with alternator pulley depending on engine.

Thanks,

Les

**Captainfab** · 09-17-2015, 11:38 PM

Just checking on the status of the grill.

Quote:

Originally Posted by Captainfab

Interested in the grill if 62 bigwindow passes.

**PGSigns** · 09-09-2015, 07:12 AM

JDL71 $70 shipped to you on the harness. I have the full set of 5 steel wheels but need to get the tires off and check condition. No power steering. Jamie I need a painted bumper. The truck came with two steering columns. Both in pieces in the bed. Will have to gather it all up and see what is there. AOTTE1 I will work on getting the wiper setup out and let you know on the condition. The mirrors are yours. The defrost hoses were toast. Do you want all the heater stuff on the inside? Even396 I am keeping the windshield trim for my 66. Slammerd It did have deluxe knobs and I will clean them up and let you know what they look like.
Jimmy

62 short step · 09-09-2015, 07:58 AM

I'll take sail panels for $40. Shipping to 70739.

Thanks

**60-66** · 09-09-2015, 08:12 AM

Not to derail the thread but was there a spid sheet in the glove box ? Curious to see if those Stainless Steel West Coast Juniors were listed ?

**The Rocknrod** · 09-09-2015, 08:31 AM

Does it have the speaker brackets in it? If so I am interested ship to zip 76633.

**PGSigns** · 09-09-2015, 09:16 AM

No spid but you can see where it was. I was hoping for one to help with the details in my artwork. I can redo them in vinyl now. I think the mirrors are original to the truck. No speaker or bracket as it was a radio delete truck. I may have the speaker and bracket that came out my 65.
Jimmy

**The Rocknrod** · 09-09-2015, 09:19 AM

Quote:

Originally Posted by PGSigns

... No speaker or bracket as it was a radio delete truck. I may have the speaker and bracket that came out my 65.
Jimmy

Cool, let me know.
Thanks

09-08-2015, 08:11 PM	#1
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Parting this 66 Picked this up last week to get some things we needed for a couple of projects. Bed was about the only usable body part. I has a new home. Going to post pics as I pull stuff off. If there is something you want let me know and I will look to see if it is there. Jimmy Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-08-2015, 08:14 PM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Here is the first round of parts. Prices do not include shipping unless noted. Pretty nice complete grill has a few dings but overall very good. Complete with the wiring and the bolts to hold it on the truck. $175 SOLD to Jamie Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic Last edited by PGSigns; 09-15-2015 at 07:49 PM.

09-08-2015, 08:18 PM	#3
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: Parting this 66 any damage to the grille? interested in the trailer

09-08-2015, 08:21 PM	#4
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 1. West coast JR mirrors. Has one replacement mirror and could use new acorn nuts. Includes the special hardware for the top of the door. $50 Sold to aotte1 2. Signal stat flasher unit complete and in nice shape. It does power up. $85 SOLD 3. Radio delete plate with the clips. $20 Shipped Sold to 62 bigwindow 4. Set of sail panels. little dinged up but not bad. $40 SOLD Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic Last edited by PGSigns; 09-11-2015 at 09:41 AM. Reason: marked items sold

09-08-2015, 08:26 PM	#5
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: Parting this 66 I will take the radio delete

09-08-2015, 08:26 PM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 wiring harness from under the dash and firewall to the horn relay. Both in very good condition with just one plug that has some issues. The plug for the high beam switch looks like it got hot. Truck has non gauge dash, two speed wipers with washer and deluxe heater. I have the dash and the heater controls just need to clean them up and check the condition. SOLD Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic Last edited by PGSigns; 09-10-2015 at 07:50 PM.

09-08-2015, 08:30 PM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Jamie the delete plate is yours. Grill is pretty good two small dings that are barely visible in the pictures. I can take close ups if you need them. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-08-2015, 08:31 PM	#8
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: Parting this 66 interested in shipping the grille? or are you looking for anything we can trade on

09-08-2015, 08:34 PM	#9
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Parting this 66 spear points on fender trim? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

09-08-2015, 08:39 PM	#10
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 DP I will look to see if they are both good. Jamie I need a 67 to 72 complete rear fleetside bumper and brackets for my 65. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-08-2015, 08:45 PM	#11
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Parting this 66 [QUOTE=PGSigns;7302713]DP I will look to see if they are both good. ok let me know- trim pieces also if usable __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

09-08-2015, 08:40 PM	#12
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: Parting this 66 chrome I assume? I might be able to locate one

09-08-2015, 09:01 PM	#13
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: Parting this 66 How much for the harness? What are you doing with the steel wheels? Any hubcaps? __________________ Psalm 23 64 C10 66 K20

09-08-2015, 09:57 PM	#14
Cypher Registered User Join Date: Jul 2015 Location: Arleta Ca. Posts: 44	Re: Parting this 66 I would like the side moldings if available?

09-08-2015, 10:32 PM	#15
niner1962 Registered User Join Date: Jul 2014 Location: elwood,il. Posts: 36	Re: Parting this 66 how about a title and some numbers?



Register or Log In To remove these advertisements.

09-08-2015, 11:07 PM	#16
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting this 66 interested on info on the steering column put me 3rd in line on the front spears and fender trim __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-08-2015, 11:20 PM	#17
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: Parting this 66 Interested in the grill if 62 bigwindow passes. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-08-2015, 11:59 PM	#18
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: Parting this 66 I will take the west coast mirrors, and second on wire harness if jDl Passes. Other Parts if available: 1). the two speed wiper washer motor assembly including switch and wiper arms , 2).the heater dash metal duct work and hoses, and 3). PS pump and pulley along with alternator pulley depending on engine. Thanks, Les Last edited by aotte1; 09-09-2015 at 12:26 AM.

09-09-2015, 07:12 AM	#20
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 JDL71 $70 shipped to you on the harness. I have the full set of 5 steel wheels but need to get the tires off and check condition. No power steering. Jamie I need a painted bumper. The truck came with two steering columns. Both in pieces in the bed. Will have to gather it all up and see what is there. AOTTE1 I will work on getting the wiper setup out and let you know on the condition. The mirrors are yours. The defrost hoses were toast. Do you want all the heater stuff on the inside? Even396 I am keeping the windshield trim for my 66. Slammerd It did have deluxe knobs and I will clean them up and let you know what they look like. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-09-2015, 07:58 AM	#21
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Parting this 66 I'll take sail panels for $40. Shipping to 70739. Thanks __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

09-09-2015, 08:12 AM	#22
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Parting this 66 Not to derail the thread but was there a spid sheet in the glove box ? Curious to see if those Stainless Steel West Coast Juniors were listed ? __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-09-2015, 08:31 AM	#23
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Parting this 66 Does it have the speaker brackets in it? If so I am interested ship to zip 76633. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-09-2015, 09:16 AM	#24
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 No spid but you can see where it was. I was hoping for one to help with the details in my artwork. I can redo them in vinyl now. I think the mirrors are original to the truck. No speaker or bracket as it was a radio delete truck. I may have the speaker and bracket that came out my 65. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Register or Log In To remove these advertisements.