F/S 292 I-6 Air Cleaner Setup, Engine Towers and Fender Emblems

[Classic Bowties]

This pictured offset/power brake air cleaner setup was removed from a 72 Chevy C/30 with 292 I-6, only offering complete as pictured with upper offset lid, lower filter housing, carb to lid spacer/riser, lower block to housing support rod bracket and carb to upper lid stud. If interested, funds can be sent via paypal, check or money order, if using paypal option add 3%. Thanks, Mel

#1/OE offset 292 I-6 air cleaner/riser/bracket setup. $200. shipped in CONUS ***Sold/Shipped***

#2/OE LH-RH set of 292 I-6 engine towers/stands. $100. shipped in CONUS ***Sold/Shipped***

#3/OE pair of 292 I-6 front fender emblems. $55. shipped in CONUS ***Sold/Shipped***
.

[Classic Bowties]

292 engine tower set...

[Classic Bowties]

292 fender emblem set...

[NewBayColony]

OE offset 292 I-6 air cleaner/riser/bracket setup. $150. + ship cost

Would it be possible to measure the depth of the housing where the filter sits? Thanks, Jeff

[NewBayColony]

Originally Posted by NewBayColony

OE offset 292 I-6 air cleaner/riser/bracket setup. $150. + ship cost


Would it be possible to measure the depth of the housing where the filter sits? Thanks, Jeff

I am Interested in the air cleaner but I need to know the depth of the housing. Thanks, Jeff

[Classic Bowties]

Originally Posted by NewBayColony

I am Interested in the air cleaner but I need to know the depth of the housing. Thanks, Jeff

Hi Jeff, sorry we didn't catch your previous post from Sunday, I will get the requested information for you by mid day. Mel

[Classic Bowties]

Originally Posted by NewBayColony

Would it be possible to measure the depth of the housing where the filter sits? Thanks, Jeff

Hey Jeff, here are a couple of pictures showing both the inside and outside measurements of the lower air cleaner base/element housing assy. Mel
.

[NewBayColony]

Originally Posted by Classic Bowties

Hey Jeff, here are a couple of pictures showing both the inside and outside measurements of the lower air cleaner base/element housing assy. Mel
.

It appears to be the correct one. My truck came with one for a 250 and it is too small. The truck doesn't breath right with the 250 filter in the cannister. Right now I have the proper 292 element in the cannister so there is about a 3/4 in. gap between the upper and lower parts of the cannister. I know this is a long shot but do you have the element that was in it? Thanks, Jeff

[Classic Bowties]

Originally Posted by NewBayColony

It appears to be the correct one. My truck came with one for a 250 and it is too small. The truck doesn't breath right with the 250 filter in the cannister. Right now I have the proper 292 element in the cannister so there is about a 3/4 in. gap between the upper and lower parts of the cannister. I know this is a long shot but do you have the element that was in it? Thanks, Jeff

Hi Jeff, no we do not have the original element from this 72 C/30 292 air cleaner setup. The replacement element is readily available though from several sources and we may purchase one if we end up having this setup restored. Given the lack of interest, we are considering having this media blasted and painted or possibly powder coated but am trying to justify the investment and then price increase to try and get it sold. Mel

[NewBayColony]

Originally Posted by Classic Bowties

Hi Jeff, no we do not have the original element from this 72 C/30 292 air cleaner setup. The replacement element is readily available though from several sources and we may purchase one if we end up having this setup restored. Given the lack of interest, we are considering having this media blasted and painted or possibly powder coated but am trying to justify the investment and then price increase to try and get it sold. Mel

So would you do $150 shipped ? Thanks, Jeff