It's glock35ipsc's fault...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 08-05-2006, 07:44 PM

.......welll not really, but seeing his as a truck again got me in gear some today. I needed to do it anyways so I had room to maneuver and take the bed off.

Before I went crazy, I decided to finishing hook up my home made pipes and mufflers. Then it was time to get things ready to put the cab on.

Setup my homemade cab lifter again and got the cab in place. Front and back shot before she is set into place. This made taking the cab off and today putting it back on real easy, especially when the manpower force is just me, myself and I.

**Palf70Step** · 08-05-2006, 07:49 PM

Well she is in place, just loosely though until I get the front clip on. Uncovered the motor for a couple of shots without the shower curtain.

Pulled the taillights and rear wiring out after this, then called it a day.

Man, it is sure nice to see it with a cab on again, almost looks like it is ready to run.

Oh yeah, thanks for the motivation Glock...since I did start by pickin on ya!!

*rage'nrat638* · 08-05-2006, 08:07 PM

looks sweet ...these under takings can be a lot of work. to bad we can't just blink our eyes and make it done.
thats going to be one nice truck when you gett'er done. thank goodness we can see other's working on there trucks, so we can see what ours might look like. take your time and do it right. so you will be happy with it.
keep up the great work...

Rydn2L0w · 08-06-2006, 12:58 PM

Quote:

Originally Posted by Palf70Step

Well she is in place, just loosely though until I get the front clip on. Uncovered the motor for a couple of shots without the shower curtain.

Pulled the taillights and rear wiring out after this, then called it a day.

Man, it is sure nice to see it with a cab on again, almost looks like it is ready to run.

Oh yeah, thanks for the motivation Glock...since I did start by pickin on ya!!

I need a garage like yours. Thats awesome! Truck is looking good. Good idea about the home made cab lifter, Im going to have to take note of that when we replace my fathers cab supports.

glock35ipsc · 08-07-2006, 01:44 PM

Quote:

It's glock35ipsc's fault......

Glad I could be such a bad influence!!!

Great progress! I have temporarily stalled on mine, so-to-speak. Spent the last week or so getting the bikes ready to ride to Sturgis tomorrow. Plus, I bought an enclosed snowmobile trailer, so I have been gussying it up with lights, cabnets and stuff. And it's been hot, even with the A/C on!!

Anyhow, looking great! Keep it up!

see ten · 08-05-2006, 08:03 PM

Shower curtain!!!!!! I thought that was some new kind of ricer engine cover with a Hawaiian motif!

It always feels good to accomplish something doesn't it. You'll be cruisin again before you know it!

BowTieOgre · 08-06-2006, 12:04 AM

Quote:

Originally Posted by see ten

Shower curtain!!!!!! I thought that was some new kind of ricer engine cover with a Hawaiian motif!

It always feels good to accomplish something doesn't it. You'll be cruisin again before you know it!

I was thinking that was a pretty tropical looking engine cozy! Truck looks good man, keep up the good work.

LUV2XCLR8 · 08-05-2006, 08:32 PM

Looking good Bill

krue · 08-05-2006, 10:48 PM

Coming along nicely Bill!

When you gonna drive it up here?

**Canadian694x4** · 08-06-2006, 04:02 AM

Great Progress! I love to see peeps projects come together!

**Boog** · 08-06-2006, 07:49 AM

Looks like major progress now Bill. Looks like there is plenty of clearance around those headers too.
Just got my engine back so I'll be moving toward the body and paint next too.

**BOSS** · 08-06-2006, 08:27 AM

Congrats Bill,looks like you can almost drive it now.

**Yukon Jack** · 08-06-2006, 09:03 AM

Nothing like a bit of motivation. I'm motivated but just no free time presently - hopefully soon!

Looking great - keep after it.

08-05-2006, 07:44 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	It's glock35ipsc's fault...... .......welll not really, but seeing his as a truck again got me in gear some today. I needed to do it anyways so I had room to maneuver and take the bed off. Before I went crazy, I decided to finishing hook up my home made pipes and mufflers. Then it was time to get things ready to put the cab on. Setup my homemade cab lifter again and got the cab in place. Front and back shot before she is set into place. This made taking the cab off and today putting it back on real easy, especially when the manpower force is just me, myself and I. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 08-06-2006 at 06:58 AM.

08-05-2006, 07:49 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: It's glock35ipsc's fault...... Well she is in place, just loosely though until I get the front clip on. Uncovered the motor for a couple of shots without the shower curtain. Pulled the taillights and rear wiring out after this, then called it a day. Man, it is sure nice to see it with a cab on again, almost looks like it is ready to run. Oh yeah, thanks for the motivation Glock...since I did start by pickin on ya!! Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-05-2006, 08:07 PM	#3
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: It's glock35ipsc's fault...... looks sweet ...these under takings can be a lot of work. to bad we can't just blink our eyes and make it done. thats going to be one nice truck when you gett'er done. thank goodness we can see other's working on there trucks, so we can see what ours might look like. take your time and do it right. so you will be happy with it. keep up the great work...

08-05-2006, 08:03 PM	#6
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: It's glock35ipsc's fault...... Shower curtain!!!!!! I thought that was some new kind of ricer engine cover with a Hawaiian motif! It always feels good to accomplish something doesn't it. You'll be cruisin again before you know it!

08-05-2006, 08:32 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: It's glock35ipsc's fault...... Looking good Bill __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-05-2006, 10:48 PM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: It's glock35ipsc's fault...... Coming along nicely Bill! When you gonna drive it up here? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-06-2006, 04:02 AM	#10
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,308	Re: It's glock35ipsc's fault...... Great Progress! I love to see peeps projects come together! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

08-06-2006, 07:49 AM	#11
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,453	Re: It's glock35ipsc's fault...... Looks like major progress now Bill. Looks like there is plenty of clearance around those headers too. Just got my engine back so I'll be moving toward the body and paint next too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-06-2006, 08:27 AM	#12
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Re: It's glock35ipsc's fault...... Congrats Bill,looks like you can almost drive it now. __________________ Support our site Norwood Survivor

08-06-2006, 09:03 AM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: It's glock35ipsc's fault...... Nothing like a bit of motivation. I'm motivated but just no free time presently - hopefully soon! Looking great - keep after it. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.