IN Complete rolling body and frame 71 Custom Deluxe Part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 10-18-2011, 10:14 AM

This truck was the RARE 402 BIG BLOCK setupWood Longbed. I will have any detailed pics and prices you need but here come many...This has all the added suspension options I believe.. it had the bb 402 in it!!! Someone got to it before I did...Thanks...Duane. I am goig out to start pulling parts... be back after a while...Stay tuned

bed-SOLD LOCAL pend. payment
4 core Rad support with AC-$150 Solid
2 piece shaft with carrier bearing-$50
Mirrors Nice-$50 shipped
TH400 crossmember-$50
Front Sway-$60 with frame brackets
Fenders-$75 driver $100 pass pass sold to 72KSzl1
BB Heat shield and engine stands-$175 shipped Engine Stands $100 ship... heat shield $100 ship
Set spoke rims-$200 set $300 with tires Goodyear Wranglers with 1/8" tread until wear indicator

Disk Brake Booster- 80 shipped sold to zombiefied
Hood-$150 Completely Solid SOLD LOCAL
Rear Bumper with Hitch option and brackets-$225... Rear Bumper- $125... Rear Bumper Brkts-$70... Factory Hitch-$70 All sold pending local payment
Front Disk Entire Setup- $300
Outer AC box-$50
Inner Ac/Heat Duct and Heat Core housing-$60
Rear Slider- $40
Bench Seat nice springs-$50
Cab Mounts-$75 set...$20 a piece
Inside Bed Rails Sides- NOT ONE DING- $200/pc $350/both
Front Gate- NOT ONE DING-$150
Driver inner fender-$50
Pass Inner Fender-Junk
Rear End Dana 60 Open-$200
Rear Suspension Leaf and Spring Heavy Duty RPO-$150
Rear Drums and Brake Setup-$75
Cowl Panel Outer $40 shipped CONUS sold to jessewebb when picked up
Complete Wiring Harness with ignition and key $150 shipped CONUS tested and worked (fuse box,volt reg, front pigtails for markers and all lights,alt, EVERYHING!!!) sold to zombiefied

HeavyMetalChevy · 10-18-2011, 10:17 AM

More

HeavyMetalChevy · 10-18-2011, 10:18 AM

more... 2nd picture here features FAACTORY OE HITCH!!!! BAD MOTHA'

Levi.Johnson · 10-18-2011, 10:19 AM

What kind of shape is the lower trim molding in on the driver's side? And how much for all?

HeavyMetalChevy · 10-18-2011, 10:21 AM

Quote:

Originally Posted by Levi.Johnson

What kind of shape is the lower trim molding in on the driver's side? And how much for all?

going to get pics now Levi...gimme a sec

HeavyMetalChevy · 10-18-2011, 10:35 AM

pics for Levi...

HeavyMetalChevy · 10-18-2011, 10:36 AM

last driver side trim pics

**daddymoo2** · 10-18-2011, 11:02 AM

any pics of inside dog house or core support. Thanks

hatred · 10-18-2011, 10:28 AM

How much for the a/c switch and cabled, and the complete horn parts in/under the steering wheel?

Tony

HeavyMetalChevy · 10-18-2011, 12:14 PM

Quote:

Originally Posted by hatred

How much for the a/c switch and cabled, and the complete horn parts in/under the steering wheel?

Tony

hatred I am not 100% sure what you are wanting... Please specify...The controls or switch.. where located/

Thanks,
Duane

**daddymoo2** · 10-18-2011, 12:17 PM

How much for power steering pump assy. Thanks Daddymoo2

hatred · 10-18-2011, 01:33 PM

Quote:

Originally Posted by HeavyMetalChevy

hatred I am not 100% sure what you are wanting... Please specify...The controls or switch.. where located/

Thanks,
Duane

The horn pieces under the horn button and under the actual steering wheel. Little plastic parts, springs, flat metal disc and things...

jstevens · 10-18-2011, 01:58 PM

How much for the.custom delux embpems shipped to 26431?

HeavyMetalChevy · 10-18-2011, 03:49 PM

Quote:

Originally Posted by jstevens

How much for the.custom delux embpems shipped to 26431?

The pass side deluxe part of emblem has one post missing... Other than that the Custom emblems are both excellent... The Deluxe shows some pitting but still all chrome... 50 bucks shipped???

HeavyMetalChevy · 10-19-2011, 12:25 AM

Quote:

Originally Posted by hatred

The horn pieces under the horn button and under the actual steering wheel. Little plastic parts, springs, flat metal disc and things...

hatred.. I will check out qualit of horn pieces you requested and have pics early tomorrow.If interested in in Air control with cables it will be around 100 bucks shipped... As you can see from the few pics it is NOS comparable and I have not even pulled and cleaned yet.. .The front lens cover is clear and not scratched at all as well... Let me know

hatred · 10-19-2011, 02:36 PM

Quote:

Originally Posted by HeavyMetalChevy

hatred.. I will check out qualit of horn pieces you requested and have pics early tomorrow.If interested in in Air control with cables it will be around 100 bucks shipped... As you can see from the few pics it is NOS comparable and I have not even pulled and cleaned yet.. .The front lens cover is clear and not scratched at all as well... Let me know

Sounds perfect to me. Just let me know when you check the horn assembly out also. I'll try to check the thread often, work is busy though so I may slack some...

**too much stuff** · 10-18-2011, 12:25 PM

How much on the engine stands and heat shield on pass firewall?

HeavyMetalChevy · 10-18-2011, 03:45 PM

Quote:

Originally Posted by too much stuff

How much on the engine stands and heat shield on pass firewall?

I will prob have to get around 100 for the engine stands they are rare and hard to come by...I am sure you know that as well... They will be heavily degreased though as all my parts... And I can even strip/blast for you if need be... I will have to check on the pass firewall shield...

Let me know,
Much Appreciated

Levi.Johnson · 10-18-2011, 01:58 PM

Trim is rough, but still interested depending on price (for both sides).

Thanks,

Levi

HeavyMetalChevy · 10-18-2011, 03:52 PM

Quote:

Originally Posted by Levi.Johnson

Trim is rough, but still interested depending on price (for both sides).

Thanks,

Levi

The pass. side is ALOT better shape.. pics coming...

brn agn · 10-18-2011, 05:03 PM

If the other guys pass, I would be interested in prices on the power steering pump and reservoir, engine stands and all the factory exhaust hangers. Thanks.

slammed72 · 10-18-2011, 05:13 PM

How about the door panels and wing windows .. ?

HeavyMetalChevy · 10-19-2011, 12:20 AM

Quote:

Originally Posted by slammed72

How about the door panels and wing windows .. ?

I owe the vent windows to the guy who delivered truck for me...You needing chrome??? I have like 5 pairs total and one more chrome pair... let me know I send you pics of chrome($60) they are above average... and black on black... various costs..Door panels I will get detailed pics to post... They are nice and the driver door wood trim is EXCELLENT...pass door is average wood grain and the panels are not faded at all still bright but have some "sags" if you know what I mean but I believe that can be re glued very easily and presto like new...UPDATE...I DID NOT CLEAN THESE THINGS AT ALL...NOW I DID...BOTH WOOD GRAINS ARE PERFECTION!!! CHECK NEW PICS BRO>>SICK!!!

HeavyMetalChevy · 10-18-2011, 09:18 PM

Quote:

Originally Posted by brn agn

If the other guys pass, I would be interested in prices on the power steering pump and reservoir, engine stands and all the factory exhaust hangers. Thanks.

brn again... Your def. in line.. .but on the hangers me and burb 71 spoke in person about those prior to this post so he has dibs first...I hope you understand...

**too much stuff** · 10-18-2011, 10:10 PM

Thanks for your time, but i will pass on the engine stands.

10-18-2011, 10:14 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Complete BIG BLOCK rolling body and frame 71 Custom Deluxe Part out This truck was the RARE 402 BIG BLOCK setupWood Longbed. I will have any detailed pics and prices you need but here come many...This has all the added suspension options I believe.. it had the bb 402 in it!!! Someone got to it before I did...Thanks...Duane. I am goig out to start pulling parts... be back after a while...Stay tuned bed-SOLD LOCAL pend. payment 4 core Rad support with AC-$150 Solid 2 piece shaft with carrier bearing-$50 Mirrors Nice-$50 shipped TH400 crossmember-$50 Front Sway-$60 with frame brackets Fenders-$75 driver $100 pass pass sold to 72KSzl1 BB Heat shield and engine stands-$175 shipped Engine Stands $100 ship... heat shield $100 ship Set spoke rims-$200 set $300 with tires Goodyear Wranglers with 1/8" tread until wear indicator Disk Brake Booster- 80 shipped sold to zombiefied Hood-$150 Completely Solid SOLD LOCAL Rear Bumper with Hitch option and brackets-$225... Rear Bumper- $125... Rear Bumper Brkts-$70... Factory Hitch-$70 All sold pending local payment Front Disk Entire Setup- $300 Outer AC box-$50 Inner Ac/Heat Duct and Heat Core housing-$60 Rear Slider- $40 Bench Seat nice springs-$50 Cab Mounts-$75 set...$20 a piece Inside Bed Rails Sides- NOT ONE DING- $200/pc $350/both Front Gate- NOT ONE DING-$150 Driver inner fender-$50 Pass Inner Fender-Junk Rear End Dana 60 Open-$200 Rear Suspension Leaf and Spring Heavy Duty RPO-$150 Rear Drums and Brake Setup-$75 Cowl Panel Outer $40 shipped CONUS sold to jessewebb when picked up Complete Wiring Harness with ignition and key $150 shipped CONUS tested and worked (fuse box,volt reg, front pigtails for markers and all lights,alt, EVERYHING!!!) sold to zombiefied Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 11-04-2011 at 01:46 AM. Reason: prices and sale updates

10-18-2011, 10:17 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out More Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-18-2011, 10:18 AM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out more... 2nd picture here features FAACTORY OE HITCH!!!! BAD MOTHA' Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 10-18-2011 at 09:49 PM.

10-18-2011, 10:19 AM	#4
Levi.Johnson Registered User Join Date: Sep 2010 Location: Fulshear, TX Posts: 152	Re: Complete rolling body and frame 71 Custom Deluxe Part out What kind of shape is the lower trim molding in on the driver's side? And how much for all?

10-18-2011, 10:35 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out pics for Levi... Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-18-2011, 10:36 AM	#7
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out last driver side trim pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-18-2011, 11:02 AM	#8
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,559	Re: Complete rolling body and frame 71 Custom Deluxe Part out any pics of inside dog house or core support. Thanks

10-18-2011, 10:28 AM	#9
hatred Registered User Join Date: Jun 2010 Location: Denham Springs, La. Posts: 257	Re: Complete rolling body and frame 71 Custom Deluxe Part out How much for the a/c switch and cabled, and the complete horn parts in/under the steering wheel? Tony __________________ 05 QSM GTO - M6, Corsa, King Springs 70 SWB CST - 350/Auto, Foose 18/17 I upset whiners too....

10-18-2011, 12:17 PM	#11
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,559	Re: Complete rolling body and frame 71 Custom Deluxe Part out How much for power steering pump assy. Thanks Daddymoo2

10-18-2011, 01:58 PM	#13
jstevens Registered User Join Date: Oct 2010 Location: shinnston, wv Posts: 24	Re: Complete rolling body and frame 71 Custom Deluxe Part out How much for the.custom delux embpems shipped to 26431?

10-18-2011, 12:25 PM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Complete rolling body and frame 71 Custom Deluxe Part out How much on the engine stands and heat shield on pass firewall? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-18-2011, 05:03 PM	#21
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: Complete rolling body and frame 71 Custom Deluxe Part out If the other guys pass, I would be interested in prices on the power steering pump and reservoir, engine stands and all the factory exhaust hangers. Thanks. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

10-18-2011, 05:13 PM	#22
slammed72 Registered User Join Date: Jul 2006 Location: North Hills Posts: 47	Re: Complete rolling body and frame 71 Custom Deluxe Part out How about the door panels and wing windows .. ?

10-18-2011, 10:10 PM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Complete rolling body and frame 71 Custom Deluxe Part out Thanks for your time, but i will pass on the engine stands. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.