|
04-19-2008, 09:42 PM | #1 |
Registered User
Join Date: Mar 2000
Location: San Diego, CA USA
Posts: 344
|
Need a new pan gasket
Do I need to take off my cross member on my 72 K10 to put a new pan gasket on?
Thanks for the help guys...........
__________________
--------- 72 SWB K10 San Diego CA |
04-19-2008, 11:20 PM | #2 |
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Need a new pan gasket
On my 72K5 back when I was stock w/350 I could not get my pan off without A: lifting the engine B: supporting the engine and removing the x-member.
My solution was to drop the pan (all 1") by removing all the bolts, drying the surface between the pan & block & squirting RTV around the top of pan...wait 15min...bolt down Hey it worked...
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks |
Bookmarks |
|
|