a simple simpleton question about dishes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 07-07-2010, 02:57 PM

OK guys this is dumb but there has to be trick to popping off these dog dishes from the stock rims, Im fighting them and Im afraid of marring and denting the edges where Im prying, is there like a trick or twist to simply just "popping" these off
yes I feel dumb

cdowns · 07-07-2010, 03:29 PM

do you have the stock lugwrench? the proper way to remove is to take the pointy end insert under lip of cap them take one hand on the shank and other hand on the lugnut und and rotate

**michael bustamante** · 07-07-2010, 07:15 PM

of course, I should have thought of that, Ive fighting with an angled flat blade screwdriver. thanks c

AirSpeed · 07-07-2010, 07:53 PM

I had some that were so tight I had to use a slide hammer with a L shaped piece of steel on the end, it would pop them off with no damage.

07-07-2010, 02:57 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	a simple simpleton question about dishes OK guys this is dumb but there has to be trick to popping off these dog dishes from the stock rims, Im fighting them and Im afraid of marring and denting the edges where Im prying, is there like a trick or twist to simply just "popping" these off yes I feel dumb __________________ 1967custom

07-07-2010, 03:29 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: a simple simpleton question about dishes do you have the stock lugwrench? the proper way to remove is to take the pointy end insert under lip of cap them take one hand on the shank and other hand on the lugnut und and rotate __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-07-2010, 07:15 PM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: a simple simpleton question about dishes of course, I should have thought of that, Ive fighting with an angled flat blade screwdriver. thanks c __________________ 1967custom

07-07-2010, 07:53 PM	#4
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Re: a simple simpleton question about dishes I had some that were so tight I had to use a slide hammer with a L shaped piece of steel on the end, it would pop them off with no damage.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.