Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-21-2014, 10:54 PM | #1 |
Registered User
Join Date: Jun 2012
Location: Ruston, La.
Posts: 76
|
Changing trailing arm crossmember
Can you change to a PB trailing arm crossmember without pulling the cab? Mine will be here tomorrow and was hopeing I could just drive some rivets out and bolt it in. Thanks for the help!
|
09-22-2014, 12:40 PM | #2 |
Registered User
Join Date: Oct 2009
Location: Moline, IL
Posts: 157
|
Re: Changing trailing arm crossmember
You can, did mine that way.
Biggest trouble I had was drilling the new holes square to the frame on the top. A heavy duty right angle drill motor would help. |
03-16-2017, 07:29 PM | #3 |
Registered User
Join Date: Feb 2017
Location: Torrance, CA
Posts: 56
|
Re: Changing trailing arm crossmember
Hey guys sorry to bring up this super old thread, but I am curious how you go about drilling out the top rivets when the cab is still on? I want to change my TA crossmember as well but definitely do not want to remove the cab if it isn't 100% required! thx
|
03-16-2017, 08:29 PM | #4 |
Senior Member
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Changing trailing arm crossmember
Use an air chisel to take the heads of and then drive them out. .
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
03-16-2017, 08:55 PM | #5 |
Registered User
Join Date: Feb 2017
Location: Torrance, CA
Posts: 56
|
Re: Changing trailing arm crossmember
|
03-18-2017, 10:18 AM | #6 |
Senior Member
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Changing trailing arm crossmember
You can get to them from the bottom side. It is a real pain to do it with the cab on. If you are not saving the old cross member take and cut it off with a sawsall close to the frame to get it out the way and it eases getting to the rivets with the air chisel.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
Bookmarks |
|
|