Lots-o-parts. N. Tx. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 08-25-2005, 08:42 AM

Had to put the big WHOA-UP for now. Response was more than expected. Will repost what is left after I get all parts sold shipped.

rchdrm · 08-25-2005, 08:57 AM

Do you have any pics of the column? Is the key switch on the column?

Front bumper or rear bumper?

What kind of shape are the regulators in?

What's included in the AC unit? Any chance you have the AC/heater controls?

Musclerodz · 08-25-2005, 09:15 AM

Where is Melissa TX? Interested in condition of the doors, and right inner fender.

Mike

fade94 · 08-25-2005, 02:24 PM

Quote:

Originally Posted by Musclerodz

Where is Melissa TX? Interested in condition of the doors, and right inner fender.

Mike

Melissa is just off of HWY 75. About 50 miles South of OK state line.
I thought the doors were in nice shape until I looked inside and saw the bondo squeezed through holes. When you say right inner, are you talking about the passenger side?

Musclerodz · 08-26-2005, 06:07 PM

Quote:

Originally Posted by fade94

Melissa is just off of HWY 75. About 50 miles South of OK state line.
I thought the doors were in nice shape until I looked inside and saw the bondo squeezed through holes. When you say right inner, are you talking about the passenger side?

Yes, passenger side inner fender. Mine had battery rot in it.

Mike

fade94 · 08-25-2005, 09:15 AM

Can get pics of column today. Column is 69 truck so no key on column.
Updated list with front and rear bumpers. (same price for each)
Regulators go up and down fine.
A/C unit is the unit that was dealer installed under the dash with the hoses thru the firewall. The go to the front of the motor where there were supposedly cut from the compressor. This unit is self contained. Does not use heater/AC control in dash.

byrd · 08-25-2005, 01:28 PM

is the cluster 3, or 7 gauge? if it is 7 then consider it sold. please let me know and how you want to be paid, thanks ? Randy

**70STOVEBOLT** · 08-25-2005, 01:49 PM

What kind of shape are the door shells in? Got pics?

fade94 · 08-25-2005, 02:26 PM

Quote:

Originally Posted by byrd

is the cluster 3, or 7 gauge? if it is 7 then consider it sold. please let me know and how you want to be paid, thanks ? Randy

Cluster is 7 gauge. I think I have an extra lens that is good. I think the one in this truck is cracked. (kids with BB guns)

Money order is fine.
I will PM my address to you.
Give me your zip so I can determine shipping.

fade94 · 08-25-2005, 02:39 PM

Took some more pics at lunch. Only working 3 hours tomorrow so hopefully I can get more stuff pulled and get pics taken. Since my computer crashed at home, it may be later tomorrow afternoon before I can answer questions. (Will have to come back up to work)
I took the A/C unit apart to clean out the hornets...I have all bolts and screws in a zip lock bag. Will be all together before you get it.
Not very good pic of column, but it is still in the truck.

fade94 · 08-25-2005, 02:41 PM

more

fade94 · 08-26-2005, 08:00 AM

ttt

jakeslim · 08-26-2005, 08:29 AM

I'll take that AC unit if still Available. Let me know shipping to 94952

fade94 · 08-29-2005, 08:43 AM

Quote:

Originally Posted by jakeslim

I'll take that AC unit if still Available. Let me know shipping to 94952

Your PM box is full.....I sent PayPal info.

fade94 · 08-26-2005, 10:52 AM

bump

fade94 · 08-27-2005, 09:15 AM

b.b.bump

FuelCellGuy · 08-27-2005, 09:19 AM

Any leaks on the power steering gear box?? Put me in line on that if no leaks.
Also, looking for the power steering center link, if there's a difference between power and non-power. What about a swap bar as well?

fade94 · 08-27-2005, 09:20 AM

Not sure on leaks. Truck was not running when I got it. Added a pic

fade94 · 08-27-2005, 06:34 PM

bump

fsumatt12 · 08-27-2005, 07:38 PM

How much for the tailgate with shipping to 32541? I would like the brackets and all if possible. Thanks, Matt

Fsumatt12@aol.com

fade94 · 08-27-2005, 08:02 PM

Will have to pull, weigh and measure to figure shipping. Will also get pictures of all sides of tailgate.

fade94 · 08-28-2005, 08:27 AM

Make some offers. Need to get this frame stripped.

fade94 · 08-29-2005, 08:18 AM

bump

fade94 · 08-30-2005, 09:25 AM

Unsold parts going on ebay tomorrow. Make an offer guys...

samwise68 · 08-30-2005, 10:15 AM

how does the front fenders look? and would you be willing to part with them, along with the grill?

thanks.
.sam.

08-25-2005, 08:42 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Lots-o-parts. 69 Chev.N. Tx. Had to put the big WHOA-UP for now. Response was more than expected. Will repost what is left after I get all parts sold shipped. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 09-01-2005 at 04:17 PM.

08-25-2005, 08:57 AM	#2
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Interested Do you have any pics of the column? Is the key switch on the column? Front bumper or rear bumper? What kind of shape are the regulators in? What's included in the AC unit? Any chance you have the AC/heater controls?

08-25-2005, 09:15 AM	#3
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Where is Melissa TX? Interested in condition of the doors, and right inner fender. Mike __________________ Mike Redpath

08-25-2005, 09:15 AM	#6
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Can get pics of column today. Column is 69 truck so no key on column. Updated list with front and rear bumpers. (same price for each) Regulators go up and down fine. A/C unit is the unit that was dealer installed under the dash with the hoses thru the firewall. The go to the front of the motor where there were supposedly cut from the compressor. This unit is self contained. Does not use heater/AC control in dash. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-25-2005, 02:39 PM	#10
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	More pictures Took some more pics at lunch. Only working 3 hours tomorrow so hopefully I can get more stuff pulled and get pics taken. Since my computer crashed at home, it may be later tomorrow afternoon before I can answer questions. (Will have to come back up to work) I took the A/C unit apart to clean out the hornets...I have all bolts and screws in a zip lock bag. Will be all together before you get it. Not very good pic of column, but it is still in the truck. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 08-25-2005 at 02:43 PM.

08-25-2005, 01:49 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	What kind of shape are the door shells in? Got pics?

08-25-2005, 02:41 PM	#11
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	More.. more Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-26-2005, 08:00 AM	#12
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	ttt __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-26-2005, 08:29 AM	#13
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	I'll take that AC unit if still Available. Let me know shipping to 94952 __________________ 69 K5 CST stock- 350, 4speed 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's,

08-26-2005, 10:52 AM	#15
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-27-2005, 09:15 AM	#16
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	b.b.bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-27-2005, 09:19 AM	#17
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Any leaks on the power steering gear box?? Put me in line on that if no leaks. Also, looking for the power steering center link, if there's a difference between power and non-power. What about a swap bar as well? Last edited by FuelCellGuy; 08-27-2005 at 09:20 AM.

08-27-2005, 09:20 AM	#18
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Not sure on leaks. Truck was not running when I got it. Added a pic Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 08-27-2005 at 10:59 AM.

08-27-2005, 06:34 PM	#19
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-27-2005, 07:38 PM	#20
fsumatt12 Registered User Join Date: Jul 2005 Location: North Florida Posts: 8	How much for the tailgate with shipping to 32541? I would like the brackets and all if possible. Thanks, Matt Fsumatt12@aol.com Last edited by fsumatt12; 08-27-2005 at 07:39 PM.



Register or Log In To remove these advertisements.

08-27-2005, 08:02 PM	#21
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Will have to pull, weigh and measure to figure shipping. Will also get pictures of all sides of tailgate. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-28-2005, 08:27 AM	#22
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Make some offers. Need to get this frame stripped. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-29-2005, 08:18 AM	#23
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-30-2005, 09:25 AM	#24
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Unsold parts going on ebay tomorrow. Make an offer guys... __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-30-2005, 10:15 AM	#25
samwise68 FarmBoy. Join Date: Feb 2005 Location: Rhinelander, WI Posts: 1,103	how does the front fenders look? and would you be willing to part with them, along with the grill? thanks. .sam.

Register or Log In To remove these advertisements.