Mcgaughys Big Brake Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stunna · 08-17-2009, 07:53 AM

anybody installed or used this kit?

**N2TRUX** · 08-17-2009, 10:30 AM

Which one? Had a member "try" to install the rear conversion kit and sent it back.

stunna · 08-17-2009, 09:20 PM

Quote:

Originally Posted by N2TRUX

Which one? Had a member "try" to install the rear conversion kit and sent it back.

Well i was really talking bout the front, but rear input would be great also

PBFAB.COM · 08-17-2009, 09:56 PM

Quote:

Originally Posted by stunna

Well i was really talking bout the front, but rear input would be great also

I have a couple sets in the shop "waiting to be installed". They look great, and for the price, it seems to be a killer deal. There have been zero complaints on the front kit, but I have heard of one board member who had some problems with the rear kit fitment. I will hopefully have some more feedback on the rear shortly.

pcmcobra · 08-17-2009, 10:06 PM

I bought the rear, and it did not fit. Rotor hub hole too small, even after machining, rotor would not fit over axle flange. Too bad, looked great.

PBFAB.COM · 08-17-2009, 10:12 PM

Quote:

Originally Posted by pcmcobra

I bought the rear, and it did not fit. Rotor hub hole too small, even after machining, rotor would not fit over axle flange. Too bad, looked great.

What was the response from McGaughy's? I am assuming you weren't the only one????

pcmcobra · 08-22-2009, 07:55 PM

Quote:

Originally Posted by porterbuilt

What was the response from McGaughy's? I am assuming you weren't the only one????

McGaughys just said, "yes, you have to either machine inside of rotor or perimeter of axle hub"...that specific info was not divulged until I ran into the problem.

stunna · 08-19-2009, 09:45 PM

Quote:

Originally Posted by pcmcobra

I bought the rear, and it did not fit. Rotor hub hole too small, even after machining, rotor would not fit over axle flange. Too bad, looked great.

i called them and they said you have to turn the axle flange down in order for it to fit. Did you try this?

griffman · 08-20-2009, 10:11 PM

i just talked to the guy who i bought them from said no problem he would machine them down he said it was no big deal

griffman · 08-20-2009, 10:12 PM

yes i will post the pics did u want to see the front brakes now i have pics

GVizzle · 08-20-2009, 11:33 PM

Quote:

Originally Posted by griffman

yes i will post the pics did u want to see the front brakes now i have pics

YES I would like to see as much as I can before I jump into those.

I would like to see PICs with and without the wheel if possible.

Thanks

**N2TRUX** · 08-21-2009, 08:32 AM

Quote:

Originally Posted by stunna

i called them and they said you have to turn the axle flange down in order for it to fit. Did you try this?

Quote:

Originally Posted by porterbuilt

What was the response from McGaughy's? I am assuming you weren't the only one????

Take a look here. LINK

pcmcobra · 08-22-2009, 07:56 PM

Quote:

Originally Posted by stunna

i called them and they said you have to turn the axle flange down in order for it to fit. Did you try this?

way too much material needed to be removed, like 7/16...had to pass.

LMDGUY · 03-30-2010, 06:50 PM

Quote:

Originally Posted by pcmcobra

I bought the rear, and it did not fit. Rotor hub hole too small, even after machining, rotor would not fit over axle flange. Too bad, looked great.

Iv installed a few aftermarket disk brake kits and have had to do this before.. never mentioned in any of the instructions but when you call they alwasy say "may need to machine down some axles"

griffman · 08-17-2009, 11:51 PM

i installed the front kit fits great have the rear but havent installed yet

GVizzle · 08-19-2009, 09:25 PM

Quote:

Originally Posted by griffman

i installed the front kit fits great have the rear but havent installed yet

Can you please post pics when you finish install

dnd1978 · 02-05-2010, 08:57 PM

Quote:

Originally Posted by griffman

i installed the front kit fits great have the rear but havent installed yet

Im installing the front Mcgaughys Big Brake Kit and the 2 brake line are short. what did you do about the brake line?

dnd1978 · 02-08-2010, 10:59 PM

Finished installing my McGaughy's big 13" Front kit this weekend. The parts in the kit where good quality and went together with no problems. The kit was all bolt on but i had to move my brake lines from the front of the cross member to the back(had to remove & reweld brackets). My kit did not come with directions, part list or discription of expendable parts like pads and rotors. I would reuse McGauphy's.

crakarjax · 04-08-2010, 05:32 PM

Quote:

Originally Posted by dnd1978

Finished installing my McGaughy's big 13" Front kit this weekend. The parts in the kit where good quality and went together with no problems. The kit was all bolt on but i had to move my brake lines from the front of the cross member to the back(had to remove & reweld brackets). My kit did not come with directions, part list or discription of expendable parts like pads and rotors. I would reuse McGauphy's.

What size wheels are those? I like!

dnd1978 · 04-08-2010, 09:00 PM

Quote:

Originally Posted by crakarjax

What size wheels are those? I like!

Thanks 20x8 Boss 335

c10seconds · 04-08-2010, 10:10 PM

Quote:

Originally Posted by dnd1978

Finished installing my McGaughy's big 13" Front kit this weekend. The parts in the kit where good quality and went together with no problems. The kit was all bolt on but i had to move my brake lines from the front of the cross member to the back(had to remove & reweld brackets). My kit did not come with directions, part list or discription of expendable parts like pads and rotors. I would reuse McGauphy's.

How much is this kit? What all does it come with??

PBFAB.COM · 04-08-2010, 11:38 PM

Quote:

Originally Posted by c10seconds

How much is this kit? What all does it come with??

Stop by the shop, I have a kit there that you can see in person.

LUV2XCLR8 · 08-21-2009, 05:38 AM

I have the McGaughy's 13" Front and Rear kit and it's already installed.

On the rear kit read the instructions, I didn't. (Machine work required)

My only complaint is they don't offer anything other than rubber lines.

(But I got Stainless Steel Braided ones from Inline Tube for an extra cost)

As for size, quality, & looks - Killer kit just my $.02 (Pic's on my website)

**N2TRUX** · 08-21-2009, 08:33 AM

Quote:

Originally Posted by LUV2XCLR8

I have the McGaughy's 13" Front and Rear kit and it's already installed......- Killer kit just my $.02 (Pic's on my website)

Where?

LUV2XCLR8 · 08-22-2009, 11:27 AM

Quote:

Originally Posted by N2TRUX

Where?

08-17-2009, 07:53 AM	#1
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Mcgaughys Big Brake Kit anybody installed or used this kit?

08-17-2009, 10:30 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Mcgaughys Big Brake Kit Which one? Had a member "try" to install the rear conversion kit and sent it back. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-17-2009, 10:06 PM	#5
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Mcgaughys Big Brake Kit I bought the rear, and it did not fit. Rotor hub hole too small, even after machining, rotor would not fit over axle flange. Too bad, looked great. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

08-20-2009, 10:11 PM	#9
griffman Registered User Join Date: May 2009 Location: modesto ca Posts: 10	Re: Mcgaughys Big Brake Kit i just talked to the guy who i bought them from said no problem he would machine them down he said it was no big deal

08-20-2009, 10:12 PM	#10
griffman Registered User Join Date: May 2009 Location: modesto ca Posts: 10	Re: Mcgaughys Big Brake Kit yes i will post the pics did u want to see the front brakes now i have pics

08-17-2009, 11:51 PM	#15
griffman Registered User Join Date: May 2009 Location: modesto ca Posts: 10	Re: Mcgaughys Big Brake Kit i installed the front kit fits great have the rear but havent installed yet Last edited by griffman; 08-17-2009 at 11:58 PM. Reason: mistake

02-08-2010, 10:59 PM	#18
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Mcgaughys Big Brake Kit Finished installing my McGaughy's big 13" Front kit this weekend. The parts in the kit where good quality and went together with no problems. The kit was all bolt on but i had to move my brake lines from the front of the cross member to the back(had to remove & reweld brackets). My kit did not come with directions, part list or discription of expendable parts like pads and rotors. I would reuse McGauphy's. Attached Images

08-21-2009, 05:38 AM	#23
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	Re: Mcgaughys Big Brake Kit I have the McGaughy's 13" Front and Rear kit and it's already installed. On the rear kit read the instructions, I didn't. (Machine work required) My only complaint is they don't offer anything other than rubber lines. (But I got Stainless Steel Braided ones from Inline Tube for an extra cost) As for size, quality, & looks - Killer kit just my $.02 (Pic's on my website) Last edited by LUV2XCLR8; 08-21-2009 at 05:48 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.