Help!!! Big Trouble In Ohio - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tommygfunk · 11-18-2003, 05:25 AM

I'm almost done with my 67 to 87 crossmember/susp swap and hit a

. as far as the stearing [inner/outer.t rods drag link ,etc] what one do i use the 87 or 67 or a combo of both

.

help

tom

**GMCPaul** · 11-18-2003, 06:42 AM

Use the 87 parts, be sure to save your original center link as they are not made new and someone most likely will need one on the parts board. You could use just the 87 outer tie rod ends but then you would need a adapter sleeve to attach the larger 87 outer tie rod to the smaller 67-70 inner tie rod. Since you already have the 87 parts cheapest route is to reuse the 87 parts.
GMCPaul

11-18-2003, 05:25 AM	#1
tommygfunk tommy . master of madness Join Date: Aug 2003 Location: Brilliant Ohio My own personal Hell! Posts: 139	Help!!! Big Trouble In Ohio I'm almost done with my 67 to 87 crossmember/susp swap and hit a . as far as the stearing [inner/outer.t rods drag link ,etc] what one do i use the 87 or 67 or a combo of both . help tom

11-18-2003, 06:42 AM	#2
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,719	Use the 87 parts, be sure to save your original center link as they are not made new and someone most likely will need one on the parts board. You could use just the 87 outer tie rod ends but then you would need a adapter sleeve to attach the larger 87 outer tie rod to the smaller 67-70 inner tie rod. Since you already have the 87 parts cheapest route is to reuse the 87 parts. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.