which carburetor is best???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roughedup72 · 03-23-2006, 01:33 PM

O.K. so I think I've decided to buy a new carb for my truck the problem is I'm not sure which one to go with, Edelbrock or Holly. I have a Quadrojet right now and am having problems with it. I thought about rebuilding it but I'm not sure I want to spend the time on it. Which carb do you guys like and why. My engine is basically stock for right now I do however plan on adding a cam before long to give me a little more power. I do have an edelbrock 2101 intake and am adding headers and dual exhaust this weekend (Thanks TJ) so I'm looking at a 600cfm. Thanks in advance for the input.

1969k10stepside · 03-23-2006, 01:35 PM

I like the edelbrock performer series carbs.Most of my 400 small block will be edelbrock.

cdowns · 03-23-2006, 01:37 PM

holley 94 my alltime favorite

roughedup72 · 03-23-2006, 01:48 PM

I like the holly 94,not sure its what I'm looking for though. I'm thinking 4 barrel. Love paying for gas.

cdowns · 03-23-2006, 03:38 PM

Quote:

Originally Posted by roughedup72

I like the holly 94,not sure its what I'm looking for though. I'm thinking 4 barrel. Love paying for gas.

2+2+2+2+2+2========OH MY GOD!!!!

Karl Hoh · 03-23-2006, 01:51 PM

Edelbrock, modern version of Q-jet. You can tune and get great milage & response. Holleys orginally designed as racing carbs. Never could get milage out of them, gave up & went back to Q-jets. Guys running factory carbs in N.H.R.A. Stock Eliminator classes are going hi 10s. Whats wrong with yours?

roughedup72 · 03-23-2006, 02:17 PM

I'm not sure, It seems to be causing a skip or miss, when I step down on it it pops then sometimes it does fine

Karl Hoh · 03-23-2006, 08:13 PM

Quote:

Originally Posted by roughedup72

I'm not sure, It seems to be causing a skip or miss, when I step down on it it pops then sometimes it does fine

Sounds like the throttle shaft is worn ( common problem), it will suck air at odd times and lean the mixture( pops), the accelerator pump may be worn and slightly out of time (skip). Tuning these carbs is from mild to wild. I just mess with jets. You can change secondary rods, hangers, vacuum break. It depends want you want from the carb. I'm sure someone in your area is doing carbs for the N.H.R.A. Stocker guys if you want a bad a$$ carb.

roughedup72 · 03-23-2006, 02:18 PM

I also dont know much about tuning it.

RainFade · 03-24-2006, 09:39 AM

Quote:

Originally Posted by roughedup72

I also dont know much about tuning it.

Get the ROE book on q-jets !!!

http://www.amazon.com/gp/product/089...Fencoding=UTF8

68Stepbed · 03-23-2006, 02:47 PM

Depends on what you're wanting your truck to do. Decent performance and great driveability= Edelbrock. Great performance and decent driveability= Holley.

Tx Firefighter · 03-23-2006, 02:53 PM

I used to run only Holleys, till I got my first Edelbrock. I've never been interested in another Holley after seeing the light.

Mechdawg · 03-23-2006, 03:12 PM

Has anyone tried the road demon carbs. I was thinking of going that route when its time to replace my holly. Ive heard good things about them being easy to tune but never seen one in person.

70c10 · 03-23-2006, 04:03 PM

Quote:

Originally Posted by Mechdawg

Has anyone tried the road demon carbs. I was thinking of going that route when its time to replace my holly. Ive heard good things about them being easy to tune but never seen one in person.

I have one and really like it. I would get one again.

HotRod71 · 03-23-2006, 03:45 PM

I have a Holley and may have a mild cam in it. I get about 13mpg with an OD tranny. Not very fuel friendly at all.

Psycho71 · 03-23-2006, 04:15 PM

Anyone tried the Holley Street Avenger Carbs.? A guy I work with just put one on a mid-level 350 and it works great. He can change the secondary spring to adjust when they open. He said w/the mileage spring he gets about 16 on the hwy, and with the aggressive spring he doesn't get to pass many stations, but the truck runs like a banshee. And he can change the spring in about 5 minutes.

He did have one small tuning issue. He used the 670cfm and had to buy the accellerator pump cam kit. Rolling into the trhottle on the hwy it would hesitate, but one step up on the pump cam fixed it right away. He used to run nothing but Edelbrock stuff and loves his new holley. He really liked the price too. We found one on Ebay that was NEW in box for $285 shipped. Even came with a pressure guage and dual fuel line kit. I know when I get a few other bugs worked out, I'll be buying one.

Just an observation I thought I'd relate.

Jay

boraxman · 03-23-2006, 05:03 PM

Quote:

Originally Posted by Psycho71

Anyone tried the Holley Street Avenger Carbs.? A guy I work with just put one on a mid-level 350 and it works great. He can change the secondary spring to adjust when they open. He said w/the mileage spring he gets about 16 on the hwy, and with the aggressive spring he doesn't get to pass many stations, but the truck runs like a banshee. And he can change the spring in about 5 minutes.

He did have one small tuning issue. He used the 670cfm and had to buy the accellerator pump cam kit. Rolling into the trhottle on the hwy it would hesitate, but one step up on the pump cam fixed it right away. He used to run nothing but Edelbrock stuff and loves his new holley. He really liked the price too. We found one on Ebay that was NEW in box for $285 shipped. Even came with a pressure guage and dual fuel line kit. I know when I get a few other bugs worked out, I'll be buying one.

Just an observation I thought I'd relate.

Jay

I have the 670 Street Avenger. Bought it slighty used off Ebay. Put it on, turned the mix screws out 1 1/2 each side, adjusted idle, checked float level, pulled out and smoked tires down street.

Jerry Jones · 03-23-2006, 05:52 PM

I run nothing but Edelbrock on my trucks and holleys on my boats

cableguy0 · 03-23-2006, 07:18 PM

i would run a holley. it will require more tuning in the first place but once its tuned in it will run better than any edelbrock.if the carb is properly tuned for the engine the mileage will be just fine.the street avenger carbs are great. the last 40 or 50 years of holley experience tied into it. the demons are a holley knock off with a billet main body and fuel bowls still the same basic design.

67chevemall · 03-23-2006, 04:48 PM

I've had three holleys(can say good and bad things about them)
The old timer I get advice from says use holley for racing and tuning, use edel for driving.
I am just into long cruises now so I bought a edelbrock 4106 for this summer....
can't wait to see the light........

farside847 · 03-23-2006, 08:23 PM

Would an edelbrock 1400 have a higher fuel economy than a stock 2bb?

**Ricks1971** · 03-23-2006, 08:44 PM

Well the HOLLEY AVENGER SERIES is a good carb, but I bought a Barry Grant several months ago and I will never buy another holley after buying the demon. Easy to tune and better performance. I does cost abit more but I think its worth it!

72MARIO · 03-23-2006, 08:52 PM

Quote:

Has anyone tried the road demon carbs

I have a Speed Demon It's AWESOME
They are Easy to tune and better performance. I does cost a bit more but It is worth it.

I have a Edelbrock 1406 on my 84 and it's is the worst carb I have ever bought. Burning my money would have been more fum.

My dad also has one on his 385 stroker and it gets crused at daily.

**VetteVet** · 03-23-2006, 09:46 PM

I bought my vette in Miami and drove it home via Charleston SC. it has a 750 holley double pumper on a stock 350 l-48 vette engine and I got 18 MPG through four or five tanks of gas plus it ran pretty strong too. I think I would go with the Edelbrock though if I was buying a new one.

stope4 · 03-23-2006, 10:56 PM

I'd just have the quadrajet rebuilt. In my opinion, it's as good as the Edelbrock.

03-23-2006, 01:33 PM	#1
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	which carburetor is best???? O.K. so I think I've decided to buy a new carb for my truck the problem is I'm not sure which one to go with, Edelbrock or Holly. I have a Quadrojet right now and am having problems with it. I thought about rebuilding it but I'm not sure I want to spend the time on it. Which carb do you guys like and why. My engine is basically stock for right now I do however plan on adding a cam before long to give me a little more power. I do have an edelbrock 2101 intake and am adding headers and dual exhaust this weekend (Thanks TJ) so I'm looking at a 600cfm. Thanks in advance for the input. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

03-23-2006, 01:35 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: which carburetor is best???? I like the edelbrock performer series carbs.Most of my 400 small block will be edelbrock.

03-23-2006, 01:37 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: which carburetor is best???? holley 94 my alltime favorite __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 05-12-2006 at 08:05 AM.

03-23-2006, 01:48 PM	#4
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: which carburetor is best???? I like the holly 94,not sure its what I'm looking for though. I'm thinking 4 barrel. Love paying for gas. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

03-23-2006, 01:51 PM	#6
Karl Hoh A little east of nowhere Join Date: Feb 2006 Location: LaBroquerie,Manitoba Canada Posts: 168	Re: which carburetor is best???? Edelbrock, modern version of Q-jet. You can tune and get great milage & response. Holleys orginally designed as racing carbs. Never could get milage out of them, gave up & went back to Q-jets. Guys running factory carbs in N.H.R.A. Stock Eliminator classes are going hi 10s. Whats wrong with yours?

03-23-2006, 02:17 PM	#7
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: which carburetor is best???? I'm not sure, It seems to be causing a skip or miss, when I step down on it it pops then sometimes it does fine __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

03-23-2006, 02:18 PM	#9
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: which carburetor is best???? I also dont know much about tuning it. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

03-23-2006, 02:47 PM	#11
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: which carburetor is best???? Depends on what you're wanting your truck to do. Decent performance and great driveability= Edelbrock. Great performance and decent driveability= Holley. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

03-23-2006, 02:53 PM	#12
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: which carburetor is best???? I used to run only Holleys, till I got my first Edelbrock. I've never been interested in another Holley after seeing the light. __________________ I'm on the Instagram- @Gearhead_Kevin

03-23-2006, 03:12 PM	#13
Mechdawg Registered User Join Date: Jul 2002 Location: Dover AFB Delaware Posts: 159	Re: which carburetor is best???? Has anyone tried the road demon carbs. I was thinking of going that route when its time to replace my holly. Ive heard good things about them being easy to tune but never seen one in person.

03-23-2006, 03:45 PM	#15
HotRod71 Short, Fleet, Slammed, V8 Club Join Date: Mar 2006 Location: Kingsport,TN Posts: 450	Re: which carburetor is best???? I have a Holley and may have a mild cam in it. I get about 13mpg with an OD tranny. Not very fuel friendly at all. __________________ Bill 71 Chevy SWB Fleetside (WIP) www.4x4grace.com

03-23-2006, 04:15 PM	#16
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: which carburetor is best???? Anyone tried the Holley Street Avenger Carbs.? A guy I work with just put one on a mid-level 350 and it works great. He can change the secondary spring to adjust when they open. He said w/the mileage spring he gets about 16 on the hwy, and with the aggressive spring he doesn't get to pass many stations, but the truck runs like a banshee. And he can change the spring in about 5 minutes. He did have one small tuning issue. He used the 670cfm and had to buy the accellerator pump cam kit. Rolling into the trhottle on the hwy it would hesitate, but one step up on the pump cam fixed it right away. He used to run nothing but Edelbrock stuff and loves his new holley. He really liked the price too. We found one on Ebay that was NEW in box for $285 shipped. Even came with a pressure guage and dual fuel line kit. I know when I get a few other bugs worked out, I'll be buying one. Just an observation I thought I'd relate. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

03-23-2006, 05:52 PM	#18
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: which carburetor is best???? I run nothing but Edelbrock on my trucks and holleys on my boats __________________ RIP El Jay! Love you brother!

03-23-2006, 07:18 PM	#19
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: which carburetor is best???? i would run a holley. it will require more tuning in the first place but once its tuned in it will run better than any edelbrock.if the carb is properly tuned for the engine the mileage will be just fine.the street avenger carbs are great. the last 40 or 50 years of holley experience tied into it. the demons are a holley knock off with a billet main body and fuel bowls still the same basic design. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

03-23-2006, 04:48 PM	#20
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: which carburetor is best???? I've had three holleys(can say good and bad things about them) The old timer I get advice from says use holley for racing and tuning, use edel for driving. I am just into long cruises now so I bought a edelbrock 4106 for this summer.... can't wait to see the light........ __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD



Register or Log In To remove these advertisements.

03-23-2006, 08:23 PM	#21
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	Re: which carburetor is best???? Would an edelbrock 1400 have a higher fuel economy than a stock 2bb? __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

03-23-2006, 08:44 PM	#22
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: which carburetor is best???? Well the HOLLEY AVENGER SERIES is a good carb, but I bought a Barry Grant several months ago and I will never buy another holley after buying the demon. Easy to tune and better performance. I does cost abit more but I think its worth it!

03-23-2006, 09:46 PM	#24
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,717	Re: which carburetor is best???? I bought my vette in Miami and drove it home via Charleston SC. it has a 750 holley double pumper on a stock 350 l-48 vette engine and I got 18 MPG through four or five tanks of gas plus it ran pretty strong too. I think I would go with the Edelbrock though if I was buying a new one. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

03-23-2006, 10:56 PM	#25
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: which carburetor is best???? I'd just have the quadrajet rebuilt. In my opinion, it's as good as the Edelbrock.

Register or Log In To remove these advertisements.