![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Denali C10
I've been researching this idea for the past couple of days. The short wheelbase GMT800 GMC Yukon Denali is within 1 inch of the wheelbase of a 67-72 shorty C10. My idea is to find a rollover Denali that still has all of the mechanical parts operating. Strip off the body/Doghouse of the Denali and replace it with the setup off of a c10. The entire underside would be updated denali, you'd have the 6.0L engine, all wheel drive and the independent rear in a short, light pickup. The only problems I could see with it would be the width differences, if there are any as well as changing the mount points on the chassis to match that of the pickup. Sorry if this is a rehash, but I haven't seen much information on anyone else trying this out.
|
![]() |
![]() |
![]() |
#2 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,271
|
Re: Denali C10
First off welcome to the forums.
Being a body swap onto a late model chassis you might find some info down in the 4x4 forum. I know Mudder put his 67 cab n bed on a 78 or so 4 wd chassis. Awesome truck. Not the same as the Denali set up of course but you may gain something there.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2009
Location: OKC OK
Posts: 489
|
Re: Denali C10
Wow, that sounds like quite the undertaking, Please do a build thread if you start the build, you'll have 50 people watching your progress and offering solutions and help along the way, If you could pull it off it would be an amazing truck!
__________________
"You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... ![]() 71 ![]() Last edited by UltraBlue71; 06-07-2009 at 12:14 PM. |
![]() |
![]() |
![]() |
#4 |
Looks good at 20-ft .....
Join Date: Apr 2005
Location: Mtn Home, AR
Posts: 707
|
Re: Denali C10
Just watched a "Street Customs" TV show episode where the West Coast Customs business did a full body-swap of a 69 GTO shell onto an '08 - '09 ? GTO wreck.
"Two week build" in their shop for the TV show. Lotsa work, but anything's possible if you throw enough time & money at it. Should make a cool project. Take many photos please !!!! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Denali C10
I think aave anything is possible as long as you have a plasma cutter, a welder and a hammer. I will be watching for your build thread.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2009
Location: Pemberton, BC
Posts: 1,075
|
Re: Denali C10
![]() I say...........Great idea! Start looking for the donor.
__________________
My goal in life is to be as good a person as my dog already thinks I am - Unknown |
![]() |
![]() |
![]() |
#7 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Denali C10
Sounds like a killer plan GbodyFreak. Welcome to the forum.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2006
Location: at work
Posts: 2,552
|
Re: Denali C10
If you find a 07-current denali, i'll buy the compelte wiring harness from ya!
__________________
R.I.P. Killer 71 10/26/07 |
![]() |
![]() |
![]() |
#9 | |
Registered User
![]() Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,887
|
Re: Denali C10
I believe a guy put one on a GMT900 truck chassis and retained everthing down to the stock dash. It was posted here awhile back but there were no details. It looked really good.
Quote:
![]()
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
|
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
|
Re: Denali C10
Try this place
http://www.erepairables.com/search/b...ali/index.html We deal with All kinds of vehicles. We have access to most all parts and vehicle recycling search engines. I believe you can put just about any body on any rigid frame if you want to spend the money. Welcome also Mike |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Re: Denali C10
Wow, not a single negative comment in the bunch, pretty impressive! I'd probably stick with the 01-06 denali chassis since that's what I'm most familiar with. It'll be awhile before I start on this one. I got two restores completed last year and have a diesel f100(blasphemy I know) project about midway through right now that could be finished up by the end of the summer. If everything goes smoothly, I could get started with the denali if the right donor pops up. I'm thinking an insurance total would probably be the best way to find one.
|
![]() |
![]() |
![]() |
#12 | |
Registered User
![]() Join Date: Nov 2003
Location: CT
Posts: 290
|
Re: Denali C10
Quote:
|
|
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: May 2006
Location: at work
Posts: 2,552
|
Re: Denali C10
Quote:
![]()
__________________
R.I.P. Killer 71 10/26/07 |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2003
Location: NB
Posts: 3,367
|
Re: Denali C10
That would be a sticky build thread 4 sure! Go for it!
Great idea!
__________________
1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD |
![]() |
![]() |
![]() |
#15 |
MOVE OVER
Join Date: Jun 2002
Location: Warrensburg, MO
Posts: 5,470
|
Re: Denali C10
we are always interested in pics, of almost any restoration.. LOL..
and definetly would love to see this in action. if I had the skills and the time, I would do that, you are getting a new drivetrain on a truck you love.. and paying less than a new truck would cost and a unique ride as well...best of all worlds..
__________________
No matter where you are..... There you are... Buckaroo Banzi |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Re: Denali C10
This is one that got finished up last year. It'll probably need a little more care on the paint, but it's effectively done. It's stock, has the 307/ 200R4 and has right at 40K miles. It's a 1988 Cutlass Supreme Classic, so it's the last of the full frame midsized cars.
![]() |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Re: Denali C10
This is my 1980 Ford f-100, it's got a 4bt Cummins in it followed up by an M5R2 transmission. It's got a 9 inch rear out back too. I haven't seen many stepside Fords in this body style and it's nice to have a car that's the same age as you are. I've got some mini-lites waiting for it out in the garage and it's got a 97 laredo bench seat inside. I drive alot of miles through the week, so since these motors are capable of high 20s, low 30s, it should be a great little DD.
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Re: Denali C10
This is the last one for right now, a 1972 GMC sprint with a 400/400 in it. I'm assuming it was set up for drag racing by a previous owner since it's got mickey thompsons out back. It's got a 12 bolt that'll really light them up. This one will be sent out to be restored in the next year or so. I've got some more to show, including the crown jewel. It was in the garage and it's sort of dark in there and makes pictures even worse than what I took so far. Sorry for the blurry pics so far.
![]() |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Apr 2000
Location: Webster City, Iowa USA
Posts: 572
|
Re: Denali C10
I am starting to build body mounts for the burb on a 04 2500hd chassis the big differance is that the new frame is wider and all of the mounts need to be built for the older mountin points. some of the mounts will be right on top of the frame where the brake lines run to the ABS unit and you have to work around the fuel lines.
__________________
Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2008
Location: Winchester KY
Posts: 13
|
Re: Denali C10
How does the track width look? I'm figuring it will stick out some, but not a terrible amount. I think the 2500 chassis is a little different too.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|