69 column w/o tilt parts help needed

[CKfan]

Once again what I thought would be simple is made difficult by parts searching. I am at my wit's end! Need to find a vendor or sells OEM or OER.

Restoring a 69 C10 (K10) non tilt, floor shift only column and have been stuck for a week trying to locate 3 little parts without luck. Not broken or wore out by any means but since I have it blown completely apart for paint, I thought I would replace everything consumable. Can reuse if no vendor found.

Parts needed: Upper column bearing holder (manual just calls it a washer) and rubber washer that attaches to it.

Lower column white plastic bushing.

Any help would be appreciated.

[pjmoreland]

Here's the lower one:
https://www.ebay.com/itm/12526640170...Bk9SR66FyqHVYQ

The other two parts are unique to the floor shift column. Might be difficult to find. I can't find them in the parts catalog.
http://67-72chevytrucks.com/vboard/s...d.php?t=827926

Seeing as how the housing that sits between these bushing never rotates, I wouldn't expect them to ever wear out.

[CKfan]

Originally Posted by pjmoreland

Here's the lower one:
https://www.ebay.com/itm/12526640170...Bk9SR66FyqHVYQ

The other two parts are unique to the floor shift column. Might be difficult to find. I can't find them in the parts catalog.
http://67-72chevytrucks.com/vboard/s...d.php?t=827926

Seeing as how the housing that sits between these bushing never rotates, I wouldn't expect them to ever wear out.

Just bought the lower plastic one on E bay Thanks!

[Classic Bowties]

Originally Posted by CKfan

Once again what I thought would be simple is made difficult by parts searching. I am at my wit's end! Need to find a vendor or sells OEM or OER.

Restoring a 69 C10 (K10) non tilt, floor shift only column and have been stuck for a week trying to locate 3 little parts without luck. Not broken or wore out by any means but since I have it blown completely apart for paint, I thought I would replace everything consumable. Can reuse if no vendor found.

Parts needed: Upper column bearing holder (manual just calls it a washer) and rubber washer that attaches to it.

Lower column white plastic bushing.

Any help would be appreciated.

We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093

[CKfan]

Originally Posted by Classic Bowties

We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093

Need the upper rubber washer bushing if you have one. $?
Thanks

[Classic Bowties]

Originally Posted by CKfan

Need the upper rubber washer bushing if you have one. $?
Thanks

We just posted some pics and details in that above linked steering column parts f/s thread, have a look and let us know. Mel

[70shortfleet]

In your 1st picture you are calling the white bushing a lower column bushing when fact it is the lower bushing that is in the top of the column that should have a metal washer underneath it, the part you have high lighted in yellow in the 1st picture is the top of the column, hope this helps

[CKfan]

Good eye, you are correct.
I should have worded it better. Unfortunately, they are above and below each other in close proximity and have the same names per the manual (washer/bushing) so I described them as upper and lower to try and get my point to register. I guess just showing the picture may have done the trick for most.
Thanks for the response as I would not want others being confused when doing any parts search.