TX Bed for Parts

[texasld]

I have a 69 LWB box that I started the cutdown into a short bed. I decided to not continue with it. I have taken the 8 out of the rear. I'm keeping the gate, and the hardware for it and the wheel wells Everything else is a go. It has a steel bed that I can cut up for patches. Anyone interested?

I'll also let the entire thing go if you want to pick it up in the Dallas Area. Money is nice, and so are parts. Let me know what you have...

[texasld]

Doing some spring cleaning. My garage is a wreck and I need this guy gone!

[calvin78612]

Mike, bed floor center of wheel well forward, shoot me a price. Also if available right front bed side lower section just above body line and forward. That sounds really confusing, you have my number, call I and i'll explain what I need. Calvin

[Woodnears]

I'm interested in everything 2" above the lower body line down if you decide to cut it up. Lmk

[tallbob]

I'd be interested in the floor section at the rear where you did your splice and possibly a floor section in front of each wheel well. Are the cross sills also good? I'd have to look on my bed to confirm which one or two that I would need. Thanks much, Bob

[texasld]

Originally Posted by calvin78612

Mike, bed floor center of wheel well forward, shoot me a price. Also if available right front bed side lower section just above body line and forward. That sounds really confusing, you have my number, call I and i'll explain what I need. Calvin

Calvin gets the front part of the bed and the the Pass bedside from the wheelwell start forward.

Originally Posted by Woodnears

I'm interested in everything 2" above the lower body line down if you decide to cut it up. Lmk

I can get you what you need out of what's left from above.

Originally Posted by tallbob

I'd be interested in the floor section at the rear where you did your splice and possibly a floor section in front of each wheel well. Are the cross sills also good? I'd have to look on my bed to confirm which one or two that I would need. Thanks much, Bob

I can do the back section and The cross stills should be good as well. They are dirty, but nothing major.



The biggest letdown for this project will be shipping prices.

[BLT-NT-BOT]

If it gets to me I would be interested in the whole back section that you have welded back on. looks like the last 10-12 inches.

[Possmguts]

I still have dibs on the rear corner sections right? ready to pay.

[ls1nova71]

Are the wheel tubs spoken for? If not, could I get a price shipped to 64050. Thanks.

[texasld]

Originally Posted by BLT-NT-BOT

If it gets to me I would be interested in the whole back section that you have welded back on. looks like the last 10-12 inches.

It seems folks are looking all for different pieces of the same thing. I would like to sell the entire rear piece but shipping will be HIGH!

Originally Posted by Possmguts

I still have dibs on the rear corner sections right? ready to pay.

The pass side rear corner is pretty dented. Don't think it would be worth it.

Originally Posted by ls1nova71

Are the wheel tubs spoken for? If not, could I get a price shipped to 64050. Thanks.

Yea, I'm Going to hang onto those. Sorry bud!

[BLT-NT-BOT]

If you think that shipping would be to high then I will pass thanks anyway.

[kcsa75]

Do you have the taillight wiring harness?

[70 shop truck]

need a patch between the wheel wells six inches and all the way across. shipped to 28443

[Elliot949]

What do you want for the entire rear section along with the rest of the floor picked up...

[BigRed76]

I need a couple sections of the bed floor at the back where the edge is rolled over the rear cross sill.

[Possmguts]

I see you say the pass side is dented up, but what about the driver side tail light section and corner??

[franken]

I'd be interested in some bed floor patches if things go that way. I'm in DFW. Shoot me a pm if you want.