Looking for a 5 Lug posi rear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-16-2008, 10:17 AM

Looking for a 5 lug 12 bolt coil spring rear with a posi unit installed. For my 1970 C10 longbed fleetside. Looking for 3.42 to 3.73 gears but will consider others. Prefer an eaton, auburn, or powertrax posi, but factory is better than nothing. Will consider a 6 lug posi for the right price

I have a stock 6 lug open rear with 373 gears complete with drums that will be for sale when i find a posi rear. Let me know what you have

VA72C10 · 05-17-2008, 07:28 AM

Anyone got a non-posi five lug they want to sell/swap?

HavinSomeFun · 05-17-2008, 02:04 PM

Quote:

Originally Posted by VA72C10

Anyone got a non-posi five lug they want to sell/swap?

I have one. However getting it from here to there........

**Classic Bowties** · 05-17-2008, 07:28 PM

I have two coil 5-lug posi rear's available (one 3.08 and one 3.73-Sold), but as stated earlier in this thread, I think our locations would kill any chance of a deal being made.

I will get the pics of the tach dashes this afternoon.

VA72C10 · 05-17-2008, 07:23 PM

Thanks for the bump....need one a little closer to me.

VA72C10 · 05-21-2008, 07:56 AM

Still hoping to find a 5 lug posi rear

VA72C10 · 05-29-2008, 07:40 AM

still looking

cnshoot · 05-29-2008, 09:11 AM

i will bump for ya i have some but same thing to far to ship

**70cst** · 05-29-2008, 09:36 AM

ttt

VA72C10 · 05-29-2008, 11:40 PM

Thanks guys, i appreciate it.

bad421 · 05-31-2008, 06:35 AM

i have a non- posi 3.08 rear for sale, just let me know.

cobb_ben · 05-31-2008, 07:38 AM

I just had my axles drilled for the 5x5 pattern. Think I used mouser or one of those axel companies, not sure, been awhile. But the 5x5 pattern will fit with the 6 lug pattern and I have had no problems, just an idea! Went 5on5 to match the front, disc off of a 71ish truck...

VA72C10 · 05-31-2008, 07:51 AM

Quote:

Originally Posted by bad421

i have a non- posi 3.08 rear for sale, just let me know.

Should have had you bring that with the bed. Is it a 5 lug coil setup? If so, i might be interested, pm me with a price. Still would rather have a posi and 3.42 or 3.73 gears

VA72C10 · 05-31-2008, 08:27 AM

I guess a 6 lug posi is an option as well and i could swap the axles so let me know what you have in a posi 5 or 6 lug.

VA72C10 · 06-01-2008, 08:02 PM

Ttt

Brad · 06-01-2008, 11:49 PM

A couple days ago I took a 3.73 rearend in to have it looked at for something else and as a side note I asked him what it would cost to have him put a posi in and he quoted me about $500-600.

bryanschevyparts · 06-02-2008, 04:07 AM

i have a a posi unit ,with 3,07 gears w/pin .let me know ? NO AXEL OR REAR END ,JUST THE POSI-GEARS GUESSING SHIPPING WOULD BE 30-40 TOPS

VA72C10 · 06-02-2008, 05:04 AM

Quote:

Originally Posted by bryanschevyparts

i have a a posi unit ,with 3,07 gears w/pin .let me know ? NO AXEL OR REAR END ,JUST THE POSI-GEARS GUESSING SHIPPING WOULD BE 30-40 TOPS

What are you asking for the gears and posi...do you know how high of gear i can put in with that posi? Also, what shape is it in? THanks!

bryanschevyparts · 06-02-2008, 10:47 AM

the gears are 3.07 ,good on gas , i will take 55 plus the ride. i do not have the books to ID ,so if someone can help with that ,that would be great .GM FACTORY POSI.thanks bryan

grayw0lf · 06-03-2008, 09:50 AM

Quote:

Originally Posted by bryanschevyparts

i have a a posi unit ,with 3,07 gears w/pin .let me know ? NO AXEL OR REAR END ,JUST THE POSI-GEARS GUESSING SHIPPING WOULD BE 30-40 TOPS

Do you still have the 3.07 posi sitting around?

bryanschevyparts · 06-03-2008, 11:45 AM

Shipping would be 34,87 to your door usps, BUT I WANT SOMEONE TO ID IT ?I CANT REMEMBER WHAT ITS OUT OF.I JUST WANT TO MAKE SHURE ITS RIGHT I DONT WANT ANY BAD DEALS.HERES THE #S 17-5 2 C177 C26H ? ANY HELP WOULD BE GREAT I CAN ALSO SEND PICS TO THANKS MUCH BRYAN

VA72C10 · 06-03-2008, 12:01 PM

Quote:

Originally Posted by bryanschevyparts

Shipping would be 34,87 to your door usps, BUT I WANT SOMEONE TO ID IT ?I CANT REMEMBER WHAT ITS OUT OF.I JUST WANT TO MAKE SHURE ITS RIGHT I DONT WANT ANY BAD DEALS.HERES THE #S 17-5 2 C177 C26H ? ANY HELP WOULD BE GREAT I CAN ALSO SEND PICS TO THANKS MUCH BRYAN

pics would be great. jrowland@prestigecabinets.com I don't know how to decode that so any help on that would be greatly appreciated!!!

VA72C10 · 06-02-2008, 11:26 AM

If you can figure out shipping to 23112 i'd appreciate it. I would rather find a full rear, but will go this route if i don't find one as long as it will fit 373 gears

VA72C10 · 06-04-2008, 03:09 AM

ttt

VA72C10 · 06-05-2008, 01:21 AM

back ttt

05-16-2008, 10:17 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Looking for a 5 Lug or 6 lug posi rear for coil springs Looking for a 5 lug 12 bolt coil spring rear with a posi unit installed. For my 1970 C10 longbed fleetside. Looking for 3.42 to 3.73 gears but will consider others. Prefer an eaton, auburn, or powertrax posi, but factory is better than nothing. Will consider a 6 lug posi for the right price I have a stock 6 lug open rear with 373 gears complete with drums that will be for sale when i find a posi rear. Let me know what you have Last edited by VA72C10; 05-31-2008 at 08:28 AM.

05-17-2008, 07:28 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear Anyone got a non-posi five lug they want to sell/swap?

05-17-2008, 07:28 PM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,685	Re: Looking for a 5 Lug posi rear I have two coil 5-lug posi rear's available (one 3.08 and one 3.73-Sold), but as stated earlier in this thread, I think our locations would kill any chance of a deal being made. I will get the pics of the tach dashes this afternoon. Last edited by Classic Bowties; 05-22-2008 at 09:41 PM.

05-17-2008, 07:23 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear Thanks for the bump....need one a little closer to me.

05-21-2008, 07:56 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear Still hoping to find a 5 lug posi rear

05-29-2008, 07:40 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear still looking

05-29-2008, 09:11 AM	#8
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: Looking for a 5 Lug posi rear i will bump for ya i have some but same thing to far to ship __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

05-29-2008, 09:36 AM	#9
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Looking for a 5 Lug posi rear ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-29-2008, 11:40 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear Thanks guys, i appreciate it.

05-31-2008, 06:35 AM	#11
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: Looking for a 5 Lug posi rear i have a non- posi 3.08 rear for sale, just let me know. __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

05-31-2008, 07:38 AM	#12
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Re: Looking for a 5 Lug posi rear I just had my axles drilled for the 5x5 pattern. Think I used mouser or one of those axel companies, not sure, been awhile. But the 5x5 pattern will fit with the 6 lug pattern and I have had no problems, just an idea! Went 5on5 to match the front, disc off of a 71ish truck... __________________ '69 Chevy C10 400sb-350 crank 400 destroker!!! 377 2.02 dart pro1 alum.heads msd, holley db hooker pro-comps-3in exh. 3 spd. saginaw-3.73posi Flat Bed...want Reg bed...trades?

05-31-2008, 08:27 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear I guess a 6 lug posi is an option as well and i could swap the axles so let me know what you have in a posi 5 or 6 lug.

06-01-2008, 08:02 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear Ttt

06-01-2008, 11:49 PM	#16
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Looking for a 5 Lug posi rear A couple days ago I took a 3.73 rearend in to have it looked at for something else and as a side note I asked him what it would cost to have him put a posi in and he quoted me about $500-600. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

06-02-2008, 04:07 AM	#17
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: Looking for a 5 Lug posi rear i have a a posi unit ,with 3,07 gears w/pin .let me know ? NO AXEL OR REAR END ,JUST THE POSI-GEARS GUESSING SHIPPING WOULD BE 30-40 TOPS



Register or Log In To remove these advertisements.

06-02-2008, 10:47 AM	#19
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: Looking for a 5 Lug posi rear the gears are 3.07 ,good on gas , i will take 55 plus the ride. i do not have the books to ID ,so if someone can help with that ,that would be great .GM FACTORY POSI.thanks bryan

06-03-2008, 11:45 AM	#21
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: Looking for a 5 Lug posi rear Shipping would be 34,87 to your door usps, BUT I WANT SOMEONE TO ID IT ?I CANT REMEMBER WHAT ITS OUT OF.I JUST WANT TO MAKE SHURE ITS RIGHT I DONT WANT ANY BAD DEALS.HERES THE #S 17-5 2 C177 C26H ? ANY HELP WOULD BE GREAT I CAN ALSO SEND PICS TO THANKS MUCH BRYAN

06-02-2008, 11:26 AM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear If you can figure out shipping to 23112 i'd appreciate it. I would rather find a full rear, but will go this route if i don't find one as long as it will fit 373 gears

06-04-2008, 03:09 AM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear ttt

06-05-2008, 01:21 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Looking for a 5 Lug posi rear back ttt

Register or Log In To remove these advertisements.