![]() |
|
![]() |
#1 |
Registered User
Join Date: Oct 2011
Location: Jacksonville, N.C.
Posts: 4
|
Wiring Harness
Hello all,
I recently bought an 84 Chevy K10 and am beginning to tear into it. Over the years the wiring has taken a lot of abuse with someone splicing the crap out of it or just removing stuff. I did look around for a replacement harness but most of the places online only go to 1982 and I have been told there are a lot of differences in the harnesses. I do know the wiper controls are different along with high beam control but what else? Any help would be greatly appreciated. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 1,009
|
Re: Wiring Harness
I want to say '84 will also have ESC.
__________________
Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400 ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2011
Location: Jacksonville, N.C.
Posts: 4
|
Re: Wiring Harness
Yeah that ESC stuff, I plan on getting rid of all the emissions stuff which is really already gone for the most part and getting away from the HEI and doing the whole MSD package.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 1,009
|
Re: Wiring Harness
Other than that, everything should be the same. The only real differences are the ESC, the wipers, and the high beams. That will be difficult unless you swap steering columns and bezels/switches.
__________________
Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400 ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2011
Location: Jacksonville, N.C.
Posts: 4
|
Re: Wiring Harness
The wipers shouldn't be an issue, I already looked at what I would need for that but I might try and keep the high beams on the column but if it looks like to much then ill just go to the floor, Thanks for the input!!!
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 1,009
|
Re: Wiring Harness
No problem man. Got any pictures of the project?
__________________
Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400 ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2011
Location: Jacksonville, N.C.
Posts: 4
|
Re: Wiring Harness
Here is a shot from the day I brought her home.
![]() Here is a shot of my son trying to figure it out. ![]() |
![]() |
![]() |
![]() |
#8 |
Moderator
![]() Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,950
|
Re: Wiring Harness
84-86 wiring should be pretty easy to find used.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2011
Location: Poway, California
Posts: 78
|
Re: Wiring Harness
beautimus!
__________________
1992 Nissan Pathfinder XE - 4X4, other than bigger tires - stock, AWESOME desert runner! SOLD 1999 Honda Accord - 30MPH daily driver! 1985 Chevy Suburban K20 - 4X4, 8 inch lift, Rancho suspension all around, 37" MAXXIS Creepy Crawlers, light rack (my girlfriend) ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|