checking interest..........

[qksilver]

Due to some major medical issues I want to thin my herd and parts.........
I want to see if there is any interest in
67 cab small window/ no VIN usual rust in lower part but good above the floor pan
complete 72 4x4 4 speed drive train on rolling rusted frame w/o p/s box and pitman arm
set of barn doors Arizona rust free
set of barn doors with a few very small rust issues
2 67-68 hoods no rust one with a crease
7 69-72 hoods very good condition
4 misc 2/3 core radiators
72 1/2 clam shell suburban, dual air(complete), usual rust not bad....96 aluminum wheels with very good tread, runs great 350 with new heads/holley intake/carb/HEI lost keys but have another ignition cylinder hooked up, runs very good, good suspension and brakes
69-72 8 pairs of doors very good condition some with speaker holes piled between 2 trucks under shed, will have to move them to take pictures
69-72 several sets of fenders
3 complete sets of a/c systems
couple of gas tanks with and with out senders
5 wheel housings good shape
3 front bed panels
69 1/2 SWB rolling frame with a/c cab, uncut panel great firewall rust in right side and over windsheild and fleetside bed driver shape needs passenger outside bed work

[qksilver]

2 auto crossmembers
3 sets of disc brake spindles 2 with calipers and rotors
factory dual exhaust frame brackets
67-71 BB frame brackets
68 non dimple 1/2 4x4 burb frame with 72 front and rear axles
set of 67-72 small block 4X4 engine/trans crossmembers
4 sets of ram horn manifolds 2 wheel
2 sets of 4x4 ram horn manifolds
1 set of SWB bed sides minor rust on inside and one needs outer skin replaced( bed skin included)
lots of 1/2 2 wheel drive drum front suspension parts(6 lug) and non posi rears.

I gathered these parts over the last year or 2. Drove many miles and days, paid fair prices from manyt board members.
I will sell this stuff as pick up only and fair prices, most of the sheet metal is from Arizona, New Mexico, Oklahoma and Texas. So rust free or very , very little rust but maybe some dents and dings.
All of this stuff is stored tight so as some stuff sells I can pull and take other stuff out.
If you have cash or money order in hand lets deal, if you don't wait till you do, I have a limited amount of energy and time, and this stuff is paid for and stored so it doesn't eat or cost me anything. I want to get rid of it because i don't see using or needing this stuff to finish my current projects.

[qksilver]

Also quite a few small parts in boxes, any and everything to bolt a 67-72 truck together.

Plus once all this stuff is gone and i can get to my 67-68 stash there will be lots of NOS and perfect sheet metal and 67-68 only stuff.
As a tease...........a perfect 67 small window cab and a 67 3/4 2 wheel LWB factory built 4 door crew cab( beware! big big bucks) no rust and all the rare parts(doors and panels, seats, glass, chrome etc.

Please no PM's untill I put pix and prices

[Blizz]

dang......if only you'd ship. i'm looking for a couple of fenders for a 72

[BowTieOgre]

I could use a good condition A/C system. It may be a while before I can make it up that way though.

[qksilver]

Depending on how I feel, smaller stuff, meaning not sheet metal shouldn't be a problem to ship..........

add 4 speed (?) with emergency brake on trans yoke
3 speed with transfer case
4 sliding back windows 2 tinited
7 total door glasses 4 tinted
72 burb from Arizona, only rust in on front passenger side rocker, drilled holes , slightly hit front end and dents and dings, 350/350
3 sets of trailing arms, no rust one set small bends
72 super cheyenne cab with a/c set up,no rust orginal with pin holes in rockers, slight dents and dings, No title with bill of sale
72 cheyenne cab with a/c setup and glass, repaired no rust except slight firewall, new rockers /floor etc
LWB fleet bed no rust good floor with drivers side gas door

thanks,
Steve

[53burb]

I would be interested in the '72 Burb rear A/C. It would have to be shipped to AZ.

[bad69bowtie]

What part of North Carolina do you live? May be able to make a road trip if not to far. Big swap meet in Ashville weekend of July 4. That would be a good place to get rid of a bunch of truck parts!

[meathead95]

I could use 1 excellent lh 72 fender with no trim holes. dont forget my pm months ago about the crew cab. pm me you response to these things and your addy so I can see how far you are.
thanks,
keith

[special-K]

Sending you a PM.

[Hart_Rod]

Steve,

I'm still interested in an upper liftgate for my suburban.

Rob

[71HUGGER396]

I'M INTERESTED IN THE 72 SUPER CAB WITH NO RUST. How much and do you have any pics?

[qksilver]

I am in the process of making an inventory and taking pix. To be honest it will be a slow process so bare with me. Everything is stacked and packed very tight, between trucks under an equipment shed, in my shop up to the ceiling, I built decks on top of the beds on some of my stored trucks and the cabs, 6 cylinder and 402 are stacked on top, a few beds flipped over.
The above list was from memory and I sorted parts from fair, good to great as i stored them.
I have a few really rare things that I want to go top dollar the rest have stickers with what i paid for them.............so the selling prices will not be the full cost to me, all the miles time, money and gas, so please excuse the few items that I want big bucks for.
If something is already apart that's the way it will be sold. If it is complete or connected to something else that's the way it will be sold. I will not take anything apart, sold as is where is.
I am going to take pix of 20 or so items and should be listing this Monday .
Thanks,
Steve

[lamar]

Hey just wanted to say I'm very sorry to hear about your medical troubles and good luck with the parts sale!!!! Lamar.

[roughedup72]

Hello, Sorry to hear about your medical condition as well, I am very,very interested in a drivers side door for a 72 and an A/C compressor and brackets. How far from columbia S.C are you? Also a tilt column if you have one and a 3.73 posi rear. My brother and cousin is looking for the posi rears they each need one. Thanks. Please PM me and lets talk.

[Southedisto]

I am in need of some smaller stuff, let me know when you get set up and ready to sell. I would like to come out and look through the small stuff.

[qksilver]

i am located 15 miles west from Fort Bragg in NC about 45 miles west of 95.

[qksilver]

just one small corner to show what I am dealing with

[roughedup72]

DAMN!!! A GOLD MINE!! A CHEVY TRUCK OWNERS DREAM!! I'd say you deffinately got your hands full. I would love to come up and help get rid of some of your stuff. Let me know when you get the pics of the doors and a time that would be good for you.Thanks

[Blue85]

mabye if i win the lottery this friday i will come down and buy the whole works, but seriously, good luck with your medical issue and ttt for ya!

[qksilver]

Thanks..........

[special-K]

Seriously Steve,do you need a hand?

[biglou55]

Is that a 60-66 red cab stuck in the middle. If it is the same cab as a 60-66 C50 I might have to take a ride down if the price is right. they tell me that they used the same cabs.?????????????? Is it in good shape.

[qksilver]

good eye but it's a keeper. 65 big window cab waiting for me to get the frame and bed back from being straightened, will be a SWB fleet with factory A/C P/S and tach. tried to sell it last year , it didn't so i started to put it together.

[roughedup72]

Hey qsilver, any progress on pics of the doors and all your other goodies?