Selling SWB step side bed - houston area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72SWBChevy · 04-12-2005, 12:17 PM

Selling a SWB step side bed for 67 - 72 / $250.

You will need to pick up bed locally.

Putter · 04-12-2005, 12:37 PM

I need to see if it is better than the one I have.

bjohn3x · 04-12-2005, 12:54 PM

how can it be a short wide and a step side at the same time?

1971 Cheyenne · 04-12-2005, 12:59 PM

Quote:

Originally Posted by bjohn3x

how can it be a short wide and a step side at the same time?

SWB does not refer to "short wide bed" like it may sound, it referes to "short wheel base" Thus, a SWB truck could be either step or fleet.

72SWBChevy · 04-12-2005, 02:47 PM

sorry about that..it is for short wheel base truck...tks 1971 cheyenne

Putter...I will get some pics on tonight

bjohn3x · 04-12-2005, 06:15 PM

ahhhh, my "new guy" colors are showing

thanks for the clarification.

72SWBChevy · 04-12-2005, 10:24 PM

pics now attached

hammer · 04-12-2005, 10:44 PM

where in houston are you located. might be interested. im in conroe

Inspector722 · 04-12-2005, 10:46 PM

Since I am the first to say that will want if you can post a pic of the driver side to see what is is like. If it is as good as the passenger side, we can work out a deal.

72SWBChevy · 04-12-2005, 10:47 PM

i am located in the 610 & 290 area

RicksTrucks · 04-12-2005, 10:49 PM

Got any pics of the driver side?

72SWBChevy · 04-12-2005, 10:54 PM

for some reason i dont have a drive side pic saved. driver side is also in good condition, i can get and post driver side pic tomorrow

Inspector722 · 04-12-2005, 10:58 PM

Like I said, Will take if as good as passenger side. Is it cut out for spare or not?

72SWBChevy · 04-12-2005, 11:07 PM

no it does not have a cut out for spare tire

my new 72 · 04-13-2005, 12:13 AM

hey inspector, you might be stepping on Hammer's toes a bit here. He jumped before you.

72SWBChevy · 04-13-2005, 07:38 PM

hammer and inspector....drivers side bed pics added.

Inspector722 · 04-13-2005, 08:26 PM

Get Hammer to let me know. Just to say I am sorry if he felt that his toes felt like they were being stepped on. He said that he might be interested, I said I would take if both sides were as good.
Some of the pics are not that close, how is it for rust? And are all the cross bars gone?
Thanks, Stephen

72SWBChevy · 04-13-2005, 08:49 PM

most of the cross bars are missing. the rust is surface rust. there are no rust holes on the bed sides. i added 2 more pics. hope this helps out. i will check with hammer, he has not added any more threads since last night.

hammer · 04-13-2005, 09:23 PM

pmed you

hammer · 04-13-2005, 10:14 PM

pm sent,

72SWBChevy · 04-13-2005, 11:36 PM

pm returned

ZOOMY · 04-13-2005, 11:56 PM

I'll give you $250 for the drivers side fender & tailgate shipped to 53932.

72SWBChevy · 04-14-2005, 09:46 AM

zoomy - i can let you know. hammer location is local and we are going to meet so he can take a look at the bed. i

hammer · 04-14-2005, 12:33 PM

im not getting your pms. please call me at 2817931007. thats my cell number. i'll carry it with me all day.

04-12-2005, 12:17 PM	#1
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Selling SWB step side bed - houston area Selling a SWB step side bed for 67 - 72 / $250. You will need to pick up bed locally. Attached Images __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595 Last edited by 72SWBChevy; 04-13-2005 at 07:34 PM. Reason: add pics

04-12-2005, 12:37 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I need to see if it is better than the one I have. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-12-2005, 12:54 PM	#3
bjohn3x Registered User Join Date: Dec 2003 Location: Beaverton, OR Posts: 49	how can it be a short wide and a step side at the same time? __________________ 1969 Chevy 1/2T SWB w/515HP 383, Viper 6 speed (.50 OVERDRIVE BABY!), 3.73 POSI rear 1965 Mustang w/367HP 289, 5 speed, 4.11 coming

04-12-2005, 02:47 PM	#5
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	sorry about that..it is for short wheel base truck...tks 1971 cheyenne Putter...I will get some pics on tonight __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-12-2005, 06:15 PM	#6
bjohn3x Registered User Join Date: Dec 2003 Location: Beaverton, OR Posts: 49	ahhhh, my "new guy" colors are showing thanks for the clarification. __________________ 1969 Chevy 1/2T SWB w/515HP 383, Viper 6 speed (.50 OVERDRIVE BABY!), 3.73 POSI rear 1965 Mustang w/367HP 289, 5 speed, 4.11 coming

04-12-2005, 10:24 PM	#7
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	pics now attached __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-12-2005, 10:44 PM	#8
hammer Registered User Join Date: Nov 2004 Location: conroe texas Posts: 58	bed where in houston are you located. might be interested. im in conroe

04-12-2005, 10:46 PM	#9
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Since I am the first to say that will want if you can post a pic of the driver side to see what is is like. If it is as good as the passenger side, we can work out a deal. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-12-2005, 10:47 PM	#10
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	i am located in the 610 & 290 area __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-12-2005, 10:49 PM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Got any pics of the driver side? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-12-2005, 10:54 PM	#12
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	for some reason i dont have a drive side pic saved. driver side is also in good condition, i can get and post driver side pic tomorrow __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-12-2005, 10:58 PM	#13
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Like I said, Will take if as good as passenger side. Is it cut out for spare or not? __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-12-2005, 11:07 PM	#14
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	no it does not have a cut out for spare tire __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-13-2005, 12:13 AM	#15
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	hey inspector, you might be stepping on Hammer's toes a bit here. He jumped before you. __________________ I'm going to Law School, wanna debate? It's good practice.

04-13-2005, 07:38 PM	#16
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	hammer and inspector....drivers side bed pics added. __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595



Register or Log In To remove these advertisements.

04-13-2005, 08:26 PM	#17
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Get Hammer to let me know. Just to say I am sorry if he felt that his toes felt like they were being stepped on. He said that he might be interested, I said I would take if both sides were as good. Some of the pics are not that close, how is it for rust? And are all the cross bars gone? Thanks, Stephen __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 04-13-2005 at 08:28 PM.

04-13-2005, 08:49 PM	#18
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	most of the cross bars are missing. the rust is surface rust. there are no rust holes on the bed sides. i added 2 more pics. hope this helps out. i will check with hammer, he has not added any more threads since last night. Attached Images __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-13-2005, 09:23 PM	#19
hammer Registered User Join Date: Nov 2004 Location: conroe texas Posts: 58	bed pmed you

04-13-2005, 10:14 PM	#20
hammer Registered User Join Date: Nov 2004 Location: conroe texas Posts: 58	pmed pm sent,

04-13-2005, 11:36 PM	#21
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	pm returned __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-13-2005, 11:56 PM	#22
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	fender & gate I'll give you $250 for the drivers side fender & tailgate shipped to 53932.

04-14-2005, 09:46 AM	#23
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	zoomy - i can let you know. hammer location is local and we are going to meet so he can take a look at the bed. i __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

04-14-2005, 12:33 PM	#24
hammer Registered User Join Date: Nov 2004 Location: conroe texas Posts: 58	bed im not getting your pms. please call me at 2817931007. thats my cell number. i'll carry it with me all day.

Register or Log In To remove these advertisements.