![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2010
Location: Tumwater, Wa
Posts: 19
|
trans question
Quick transmission question. I want to put a sm465 into my '68 c10. It currently has the factory 3 speed and 292-6. I am wondering if the clutch, throw out bearing and all that will fit in the sm465. Also curious what I will have to do for driveline setup. Thanks guys.
|
![]() |
![]() |
![]() |
#2 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: trans question
Main thing to worry about is that you will need a high hump floor section if your truck doesn't already have one.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2010
Location: Tumwater, Wa
Posts: 19
|
Re: trans question
Ok, that makes sense. So I need to cut the old panel out and bolt on a new one? Where could I find a new panel? Or maybe its easier to make one? Thanks.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2010
Location: Tumwater, Wa
Posts: 19
|
Re: trans question
Another question. How hard is it to swap a 5 lug 12 bolt rearend to 6 lug? I broke my 6 lug rearend(twisted the diff housing) so I do have my 6 lug for parts. Can I put the axles from my 6 lug rearend into the 5 lug?
|
![]() |
![]() |
![]() |
#5 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: trans question
No, the axles on your 68 are shorter than 71-72 axles which is the year range you will find 5 lug axles.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
Bookmarks |
|
|