|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-03-2013, 01:29 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2013
Location: Amarillo Tx
Posts: 502
|
th350 to th400 with 70 factory tilt whell question
I have a 1970 cst with factory tilt wheel that am going to be chaging the th350 to a th 400. My question is if I use an original th400 from 70 truck with all related truck shift linkage, replace the indicator on the column as for a th400 will the indicator line up correctly and the column have the extra travel for the extra gear. Is the tilt column unique to the th350 and the th400?
|
|
|
|
09-03-2013, 01:32 PM
|
#2 |
|
Registered User
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
|
Re: th350 to th400 with 70 factory tilt whell question
Knowing GM, the column is the same.
BTW, TH350 and TH400 are both 3 speed transmissions
__________________
My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe |
|
|
|
|
09-03-2013, 01:36 PM
|
#3 |
|
Registered User
Join Date: Jul 2013
Location: Amarillo Tx
Posts: 502
|
Re: th350 to th400 with 70 factory tilt whell question
Da my bad I was having a senior moment, yes of course they are both 3 speeds so nothing would need to be changed on the column and the indicator will match what gear I am in correctly?
|
|
|
|
|
09-03-2013, 01:53 PM
|
#4 |
|
Moderator
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,996
|
Re: th350 to th400 with 70 factory tilt whell question
Yes, correct. The linkage is slightly different however
Posted via Mobile Device
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
|
|
|
|
09-03-2013, 02:26 PM
|
#5 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: th350 to th400 with 70 factory tilt whell question
you need a different driveshaft
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
09-03-2013, 07:50 PM
|
#6 |
|
Registered User
Join Date: Jan 2010
Location: Loveland, CO
Posts: 1,921
|
Re: th350 to th400 with 70 factory tilt whell question
The indicator will line up correctly as long as the shift linkage is adjusted properly after you get the new trans in, it is sometimes over looked so just thought I'd throw that out there.
__________________
Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
