CA Parting '72 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne shortstep · 02-19-2013, 02:24 AM

Custom Deluxe/20, no eng./trans. or related components, truck was running/driving 2 weeks ago. Cab is rusty as is left bedside & door and right front fender. Tailgate is dented. Eaton rear is tentatively sold local.

ALL PAYMENT IS MONEY ORDER ONLY EXCEPT LOCAL PICKUP. SHIPPED PRICES ARE CONUS ONLY
NO PM REPLY IN THREAD ONLY
Nice chrome vent windows with Soft-Ray glass $125 shipped.

Parchment [white] door panels, these are not as nice as they appear but are in very good driver condition. Driver side has some wear at the door handle area that is worn smooth. Passenger side has some wear and scratches that I tried to get to show in the pics.? Chrome is very nice. $80 shipped

Air cleaner assembly with heat riser and spacer. $85 shipped

I will add more pics/prices upon request.

cheyenne shortstep · 02-19-2013, 02:32 AM

Guess I should have started with a pic of the truck.
Very nice black horn button, bowtie needs touching up, texture is near perfect. $40 shipped.

rev616 · 04-04-2013, 11:09 PM

how about the inner and outter grille to 49009

70blackfish · 02-19-2013, 03:40 AM

what engine, any pictures?

sorry reread the post, was running 2 weeks ago.....

thanks

Oddfire · 02-19-2013, 04:51 AM

Are both exterior mirrors on the truck? I would like first dibs on gas cap,
complete taillight harness if not all cut up. Also if this truck had a headliner is the trim available? Jamie 71

Longhorn

nobolt · 02-19-2013, 05:11 AM

dash pad if green and not cracked...price and shipping to 48001 please

Undone · 02-19-2013, 06:03 AM

Exterior mirrors and front parking brake cable prices?

72cheyenneman · 02-19-2013, 06:38 AM

I'll take the vent windows for $125 shipped. Also, the two screws and bezels for the windows. Thanks, Casey

72cheyenneman · 02-19-2013, 09:36 PM

Quote:

Originally Posted by 72cheyenneman

I'll take the vent windows for $125 shipped. Also, the two screws and bezels for the windows. Thanks, Casey

Sorry, I meant the 2 screws and ferrules. Do you understand what parts I'm talking about? Thanks, Casey

cheyenne shortstep · 02-19-2013, 10:55 PM

72cheyenneman, you want the screws and ferrules that go below the vent windows on '72 only? If so yes that is what I'm talking about.

cheyenne shortstep · 02-19-2013, 11:58 PM

Pics for oddfire, mirror has rust on the back side, arms are straight glass is decent, it is a little wobbly. $25
Taillight harness is very nice. $50
Gas cap is scratched but no dents $7.00, prices inc. shipping

72cheyenneman · 02-20-2013, 07:46 AM

Quote:

Originally Posted by 72cheyenneman

I'll take the vent windows for $125 shipped. Also, the two screws and bezels for the windows. Thanks, Casey

Sent payment for the vent windows. Adding $5 for the screws and ferrules for the door. Can you make sure to bubble wrap the windows? Thanks, Casey

72cheyenneman · 02-19-2013, 07:10 AM

Also, what's the condition of the rear view mirror and how much? Could you post a picture of it? I'll be in after 6:00pm Central tonight. Thanks, Casey

**WIDESIDE72** · 02-19-2013, 08:44 AM

Would you sell the two rear edge door panel screws and ferrules? Also is the rear window stainless trim in decent shape? How much shipped to Leander Tx 78641?
Posted via Mobile Device

**WIDESIDE72** · 02-20-2013, 01:20 PM

Quote:

Originally Posted by WIDESIDE72

Would you sell the two rear edge door panel screws and ferrules? Also is the rear window stainless trim in decent shape? How much shipped to Leander Tx 78641?
Posted via Mobile Device

I also need of the big 1" or so diameter washers that attaches the fenderwell to the firewall.
Posted via Mobile Device

mo · 02-20-2013, 04:34 PM

Waiting to find out the condition and color of the defrost vents please.
Posted via Mobile Device

**WIDESIDE72** · 02-21-2013, 09:37 PM

Quote:

Originally Posted by WIDESIDE72

I also need of the big 1" or so diameter washers that attaches the fenderwell to the firewall.
Posted via Mobile Device

The list grows. It seems the body shop also lost the wiper motor mounting screws. Could you include them with the other parts requests?
Posted via Mobile Device

cheyenne shortstep · 02-23-2013, 12:39 PM

Moline Puller, I'll take your offer on the door panels, PM sent.

Dale Brown, if you can post a pic of the grille area I'll cut it out and ship for another $15.

Pics of the door for tjmeadows. There is a little spot starting to bubble on the lower front, you can see it in the pic.

cheyenne shortstep · 02-23-2013, 12:42 PM

Door pics.

Hercpilot · 03-30-2013, 08:32 AM

Rear springs still available?

Justin

cheyenne shortstep · 04-03-2013, 07:36 PM

nightmare, payment received for clips, will ship tomorrow. Thanks, Tremayne.

towbar · 02-19-2013, 09:15 AM

I would be interested in the tail light trim with clips and screws and tail gate upper and lower trim with clips, pending pics and price shipped to 28753. lmk
thanks a bunch!!

tjmeadows · 02-19-2013, 10:02 AM

Interested in Steering column, steering wheel and passenger door if its any good
Posted via Mobile Device

dirish · 02-19-2013, 10:32 AM

Interested in antenna if original. Thanks pm me please, so i don't miss reply. thanks
Posted via Mobile Device

mo · 02-19-2013, 10:52 AM

Ill take the dash vents if they are green and intact. To 93013 thank you.
Posted via Mobile Device

02-19-2013, 02:24 AM	#1
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Parting '72 3/4 ton Custom Deluxe/20, no eng./trans. or related components, truck was running/driving 2 weeks ago. Cab is rusty as is left bedside & door and right front fender. Tailgate is dented. Eaton rear is tentatively sold local. ALL PAYMENT IS MONEY ORDER ONLY EXCEPT LOCAL PICKUP. SHIPPED PRICES ARE CONUS ONLY NO PM REPLY IN THREAD ONLY Nice chrome vent windows with Soft-Ray glass $125 shipped. Parchment [white] door panels, these are not as nice as they appear but are in very good driver condition. Driver side has some wear at the door handle area that is worn smooth. Passenger side has some wear and scratches that I tried to get to show in the pics.? Chrome is very nice. $80 shipped Air cleaner assembly with heat riser and spacer. $85 shipped I will add more pics/prices upon request. Attached Images

02-19-2013, 02:32 AM	#2
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton Guess I should have started with a pic of the truck. Very nice black horn button, bowtie needs touching up, texture is near perfect. $40 shipped. Attached Images

04-04-2013, 11:09 PM	#3
rev616 Registered User Join Date: Feb 2010 Location: kalamazoo michigan Posts: 24	Re: Parting '72 3/4 ton how about the inner and outter grille to 49009

02-19-2013, 03:40 AM	#4
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Parting '72 3/4 ton what engine, any pictures? sorry reread the post, was running 2 weeks ago..... thanks __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

02-19-2013, 04:51 AM	#5
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting '72 3/4 ton Are both exterior mirrors on the truck? I would like first dibs on gas cap, complete taillight harness if not all cut up. Also if this truck had a headliner is the trim available? Jamie 71 Longhorn

02-19-2013, 05:11 AM	#6
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Parting '72 3/4 ton dash pad if green and not cracked...price and shipping to 48001 please __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-19-2013, 06:03 AM	#7
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 895	Re: Parting '72 3/4 ton Exterior mirrors and front parking brake cable prices?

02-19-2013, 06:38 AM	#8
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Parting '72 3/4 ton I'll take the vent windows for $125 shipped. Also, the two screws and bezels for the windows. Thanks, Casey Last edited by 72cheyenneman; 02-19-2013 at 06:57 AM.

02-19-2013, 10:55 PM	#10
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton 72cheyenneman, you want the screws and ferrules that go below the vent windows on '72 only? If so yes that is what I'm talking about.

02-19-2013, 11:58 PM	#11
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton Pics for oddfire, mirror has rust on the back side, arms are straight glass is decent, it is a little wobbly. $25 Taillight harness is very nice. $50 Gas cap is scratched but no dents $7.00, prices inc. shipping Attached Images

02-19-2013, 07:10 AM	#13
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Parting '72 3/4 ton Also, what's the condition of the rear view mirror and how much? Could you post a picture of it? I'll be in after 6:00pm Central tonight. Thanks, Casey

02-19-2013, 08:44 AM	#14
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parting '72 3/4 ton Would you sell the two rear edge door panel screws and ferrules? Also is the rear window stainless trim in decent shape? How much shipped to Leander Tx 78641? Posted via Mobile Device

02-20-2013, 04:34 PM	#16
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting '72 3/4 ton Waiting to find out the condition and color of the defrost vents please. Posted via Mobile Device

02-23-2013, 12:39 PM	#18
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton Moline Puller, I'll take your offer on the door panels, PM sent. Dale Brown, if you can post a pic of the grille area I'll cut it out and ship for another $15. Pics of the door for tjmeadows. There is a little spot starting to bubble on the lower front, you can see it in the pic. Attached Images

02-23-2013, 12:42 PM	#19
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton Door pics. Attached Images



Register or Log In To remove these advertisements.

03-30-2013, 08:32 AM	#20
Hercpilot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 19	Re: Parting '72 3/4 ton Rear springs still available? Justin

04-03-2013, 07:36 PM	#21
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 3/4 ton nightmare, payment received for clips, will ship tomorrow. Thanks, Tremayne.

02-19-2013, 09:15 AM	#22
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Parting '72 3/4 ton I would be interested in the tail light trim with clips and screws and tail gate upper and lower trim with clips, pending pics and price shipped to 28753. lmk thanks a bunch!!

02-19-2013, 10:02 AM	#23
tjmeadows Registered User Join Date: Oct 2012 Location: clarksville tennessee Posts: 948	Re: Parting '72 3/4 ton Interested in Steering column, steering wheel and passenger door if its any good Posted via Mobile Device

02-19-2013, 10:32 AM	#24
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: Parting '72 3/4 ton Interested in antenna if original. Thanks pm me please, so i don't miss reply. thanks Posted via Mobile Device

02-19-2013, 10:52 AM	#25
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting '72 3/4 ton Ill take the dash vents if they are green and intact. To 93013 thank you. Posted via Mobile Device

Register or Log In To remove these advertisements.