Motor,trannies,T-case's,body parts,ect - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 12-21-2005, 03:04 PM

Cleaning out the extra stuff.
2 68-72 box's. 1 in 95% rust free. Just a couple of 1"-2" diameter holes right at the tailgate in the bed.Otherwise the floor is perfect. There is some dents and dings in the sides. $175
The other needs a floor but the sides are pretty strait,Just a few dings and small dents.$100
70' cab rust free. drivers floor is pushed up from tire being pushed into it it.No title $125
2 Builder SBC 350's $75obo
SM465/205 $375
th400/203 $375
C&C 14 bolt rear with G80 4.10's $150
67' SBC 283 $250obo
2 67' sm420 4spd/Rockwell t-case.Still in truck,works good.$200obo
1 Brand new High Angle CV front driveshaft for 67' with 420/Rockwell setup. works well with up to 4" of lift $200
Eaton 4.10' 3rd good shape $75
th350/203 rangebox from 76' K20 needs rebuilt $75
D44/14bolt FF combo $400
3 or 4 350 fan shrouds $25
454 fan shroud $40
454 exhaust manifolds $80

**402Bowtie** · 12-21-2005, 06:06 PM

Do you have pictures? Where in Nebraska are you located? I am interested in the cab...

shelby987 · 12-22-2005, 09:34 AM

is the eaton 3rd a locker or an open diff? Pics and shipping to 48198?
Thanks

spencra · 12-22-2005, 10:31 AM

Darn, I could use a short box. Nebraska is a little out of reach though, if that NE stood for New England we might be in business.

1967k30 · 12-22-2005, 07:34 PM

I have a pair af Ramshorn manifolds also $50
1 single one $25
2 NP205 shifter handles. 1 chrome,1 black.$25 each

wanted · 12-24-2005, 02:21 AM

I'll buy the set of manifolds for $50

1967k30 · 12-24-2005, 11:20 AM

PM' sent.

71swb4x4 · 12-25-2005, 09:00 PM

Where in Nebraska are you?

1967k30 · 12-28-2005, 10:59 AM

I still have most of this stuff. Ramshorns sold to "Wanted".

ZOOMY · 12-28-2005, 08:31 PM

Are you parting the frames that these parts came from ? If so, I need 2 '67 K20 front spring front hangers................Thanks...........Zoomy

1967k30 · 12-30-2005, 09:41 PM

Make offers if you see anything you could use.I need some $$$$.

NitroMike · 01-02-2006, 02:03 PM

I'm looking for a "high-hump" bolt in trans tunnel. Would really like one from a big block auto (no hole) but will also take one from a manual trans truck. Email info to duffy.m@rcn.com. Thanks.

1967k30 · 01-03-2006, 11:37 AM

E-mail sent.

1967k30 · 01-11-2006, 11:08 AM

Still have some stuff.Would like to sell, need $$$$ soon.

**lolife99** · 01-11-2006, 09:02 PM

Got any pics of the beds?

Tynee · 01-16-2006, 07:00 PM

Not trying to be obnoxious, but you might have better luck getting some $$$$$ if you answered where you are located in Nebraska.

1967k30 · 01-17-2006, 12:01 AM

Quote:

Originally Posted by Tynee

Not trying to be obnoxious, but you might have better luck getting some $$$$$ if you answered where you are located in Nebraska.

Not a problem,I'm in western NE.I can deliver to NE and the Denver CO and Cheyenne WYO areas usurally once a month,as I go there often. I can also deliver elsewhere for $$$$

.

1967k30 · 02-01-2006, 03:12 PM

Check out my new prices

.Need to sell this stuff .

*alschevy* · 02-02-2006, 02:02 AM

can you email me some pics. chevyfiveohtwo@yahoo.com

zimmm · 02-02-2006, 01:07 PM

is the interior harness for an AC or non-AC truck?

shipping to 16340 if it is the non-AC.

thanks

Mike

1967k30 · 02-03-2006, 01:05 AM

PM's sent.

1967k30 · 02-26-2006, 12:29 PM

Most stuff still avaliable.Wiring harness is gone.

teeitup · 02-26-2006, 12:47 PM

Do you still have the 205 shifters? Thanks

1967k30 · 02-26-2006, 02:45 PM

PM sent and more stuff added.

12-21-2005, 03:04 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Motor,trannies,t-case's,axles "New Prices and More stuff" Cleaning out the extra stuff. 2 68-72 box's. 1 in 95% rust free. Just a couple of 1"-2" diameter holes right at the tailgate in the bed.Otherwise the floor is perfect. There is some dents and dings in the sides. $175 The other needs a floor but the sides are pretty strait,Just a few dings and small dents.$100 70' cab rust free. drivers floor is pushed up from tire being pushed into it it.No title $125 2 Builder SBC 350's $75obo SM465/205 $375 th400/203 $375 C&C 14 bolt rear with G80 4.10's $150 67' SBC 283 $250obo 2 67' sm420 4spd/Rockwell t-case.Still in truck,works good.$200obo 1 Brand new High Angle CV front driveshaft for 67' with 420/Rockwell setup. works well with up to 4" of lift $200 Eaton 4.10' 3rd good shape $75 th350/203 rangebox from 76' K20 needs rebuilt $75 D44/14bolt FF combo $400 3 or 4 350 fan shrouds $25 454 fan shroud $40 454 exhaust manifolds $80 __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 03-24-2006 at 04:49 PM.

12-21-2005, 06:06 PM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,727	Re: Motor,trannies,T-case's,body parts,ect Do you have pictures? Where in Nebraska are you located? I am interested in the cab...

12-22-2005, 09:34 AM	#3
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Motor,trannies,T-case's,body parts,ect is the eaton 3rd a locker or an open diff? Pics and shipping to 48198? Thanks __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

12-22-2005, 10:31 AM	#4
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Re: Motor,trannies,T-case's,body parts,ect Darn, I could use a short box. Nebraska is a little out of reach though, if that NE stood for New England we might be in business. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

12-22-2005, 07:34 PM	#5
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect I have a pair af Ramshorn manifolds also $50 1 single one $25 2 NP205 shifter handles. 1 chrome,1 black.$25 each __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-24-2005, 02:21 AM	#6
wanted Registered User Join Date: May 2003 Location: duluth, mn Posts: 63	Re: Motor,trannies,T-case's,body parts,ect I'll buy the set of manifolds for $50

12-24-2005, 11:20 AM	#7
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect PM' sent. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-25-2005, 09:00 PM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Motor,trannies,T-case's,body parts,ect Where in Nebraska are you? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-28-2005, 10:59 AM	#9
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect I still have most of this stuff. Ramshorns sold to "Wanted". __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-28-2005, 08:31 PM	#10
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: Motor,trannies,T-case's,body parts,ect Are you parting the frames that these parts came from ? If so, I need 2 '67 K20 front spring front hangers................Thanks...........Zoomy

12-30-2005, 09:41 PM	#11
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect Make offers if you see anything you could use.I need some $$$$. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

01-02-2006, 02:03 PM	#12
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Motor,trannies,T-case's,body parts,ect I'm looking for a "high-hump" bolt in trans tunnel. Would really like one from a big block auto (no hole) but will also take one from a manual trans truck. Email info to duffy.m@rcn.com. Thanks. __________________ The older I get, the faster I was!!

01-03-2006, 11:37 AM	#13
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect E-mail sent. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

01-11-2006, 11:08 AM	#14
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect Still have some stuff.Would like to sell, need $$$$ soon. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

01-11-2006, 09:02 PM	#15
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Motor,trannies,T-case's,body parts,ect Got any pics of the beds? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

01-16-2006, 07:00 PM	#16
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Motor,trannies,T-case's,body parts,ect Not trying to be obnoxious, but you might have better luck getting some $$$$$ if you answered where you are located in Nebraska. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

02-01-2006, 03:12 PM	#18
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect Check out my new prices .Need to sell this stuff . __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-02-2006, 02:02 AM	#19
alschevy Account Suspended Join Date: Jun 2005 Location: Lehigh Acres FL Posts: 205	Re: Motor,trannies,T-case's,body parts,ect can you email me some pics. chevyfiveohtwo@yahoo.com

02-02-2006, 01:07 PM	#20
zimmm Registered User Join Date: Aug 2005 Location: Pittsfield, PA Posts: 34	Re: Motor,trannies,T-case's,body parts,ect is the interior harness for an AC or non-AC truck? shipping to 16340 if it is the non-AC. thanks Mike __________________ 72 K20 - quote upon getting it home "What did you buy it for if the brakes don't work" 98 Z71, 96 Tacoma + more toys than I can remember

02-03-2006, 01:05 AM	#21
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect PM's sent. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-26-2006, 12:29 PM	#22
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect Most stuff still avaliable.Wiring harness is gone. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-26-2006, 12:47 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Motor,trannies,T-case's,body parts,ect Do you still have the 205 shifters? Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2006, 02:45 PM	#24
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Motor,trannies,T-case's,body parts,ect PM sent and more stuff added. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

Register or Log In To remove these advertisements.