Big block motor mounts?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

"67"StepSide · 04-21-2007, 09:21 AM

I have a question about big block motor mounts for my 67. I see that a lot of people on here say that if they're selling big block motor mounts, they are for 67 to 71, and that 72 is all by itself. Can somebody please explain to me why this is, because I'm putting in a front suspension from a 72 3/4 ton under my 67 frame. What motor mounts for a big block do I use? This truck is two wheel drive. Because I'm looking for a set of mounts for a big block, I just don't know which ones I need. Thanks, John

**kwmech** · 04-21-2007, 11:33 AM

You can actually use either set-up, but if you are using the 72 x-member it will be easier to use the 72 b'cuz the lower hole in the x-member will already be drilled. Does that make sense?

mikeoj · 04-21-2007, 11:52 AM

http://67-72chevytrucks.com/vboard/s...k+motor+mounts

"67"StepSide · 04-21-2007, 12:22 PM

mike thanks so much that cleared it all up for me!!!!!!!!!!!!!!!!!

BB72CHEVKT · 04-22-2007, 10:24 AM

I've got all different answers to ths question including that the 68-71 will work you just need to drill a hole in the frame. I was recently told by a
vendor on this site when inquiring about purchasing 68-71 fior my 72 bb I would not have to drill holes.

mal68ibu · 04-22-2007, 01:36 PM

I'm just readin this thread and now you have me scratching my head. I just pulled a set of small block mounts from a 72 to install on my 67. Am I in for a headache? BTW does anyone know the difference between the V6 mounts and the BB mounts? I dont have the faintest idea what is in my truck, but my 350 is sitting too high right now.

redhead69 · 04-22-2007, 04:14 PM

I'm pretty sure you have to notch the frame on a 67 to get the bb stands to work(frames wider on 67s in the front), and then I am assuming you would have to drill holes to bolt them down. I've heard of people puting a bigblock in there truck on small block towers, but requires the use of headers.

BB72CHEVKT · 04-22-2007, 04:40 PM

Quote:

Originally Posted by redhead69

I'm pretty sure you have to notch the frame on a 67 to get the bb stands to work(frames wider on 67s in the front), and then I am assuming you would have to drill holes to bolt them down. I've heard of people puting a bigblock in there truck on small block towers, but requires the use of headers.

Anyone know if this is true? Got bb going in 72 and have sb towers and headers. Will it work??????

BB72CHEVKT · 04-22-2007, 09:23 PM

ttt

04-21-2007, 09:21 AM	#1
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Big block motor mounts?? I have a question about big block motor mounts for my 67. I see that a lot of people on here say that if they're selling big block motor mounts, they are for 67 to 71, and that 72 is all by itself. Can somebody please explain to me why this is, because I'm putting in a front suspension from a 72 3/4 ton under my 67 frame. What motor mounts for a big block do I use? This truck is two wheel drive. Because I'm looking for a set of mounts for a big block, I just don't know which ones I need. Thanks, John

04-21-2007, 11:33 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,596	Re: Big block motor mounts?? You can actually use either set-up, but if you are using the 72 x-member it will be easier to use the 72 b'cuz the lower hole in the x-member will already be drilled. Does that make sense?

04-21-2007, 11:52 AM	#3
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Re: Big block motor mounts?? http://67-72chevytrucks.com/vboard/s...k+motor+mounts __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

04-21-2007, 12:22 PM	#4
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: Big block motor mounts?? mike thanks so much that cleared it all up for me!!!!!!!!!!!!!!!!!

04-22-2007, 10:24 AM	#5
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Big block motor mounts?? I've got all different answers to ths question including that the 68-71 will work you just need to drill a hole in the frame. I was recently told by a vendor on this site when inquiring about purchasing 68-71 fior my 72 bb I would not have to drill holes. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-22-2007, 01:36 PM	#6
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: Big block motor mounts?? I'm just readin this thread and now you have me scratching my head. I just pulled a set of small block mounts from a 72 to install on my 67. Am I in for a headache? BTW does anyone know the difference between the V6 mounts and the BB mounts? I dont have the faintest idea what is in my truck, but my 350 is sitting too high right now. __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

04-22-2007, 04:14 PM	#7
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Big block motor mounts?? I'm pretty sure you have to notch the frame on a 67 to get the bb stands to work(frames wider on 67s in the front), and then I am assuming you would have to drill holes to bolt them down. I've heard of people puting a bigblock in there truck on small block towers, but requires the use of headers. __________________ Currently truckless

04-22-2007, 09:23 PM	#9
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Big block motor mounts?? ttt __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.