The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-28-2016, 01:42 AM   #1
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Battery/Ignition question

Hi,

So the c10 has been in the garage for 2 weeks while I was away, went to start it today and the battery was dead. It has a new battery, alternator and regulator.

Chucked the battery charger on it for a few hours and went out to buy a multimeter to check the juice in the battery. (Also got a new positive terminal as the current one was pretty old). When I got back the battery was reading about 12.5v which is what it should be, so I changed the terminal and hooked it all up and it fired straight up.

Pretty sure I didn't leave anything on over the 2 weeks, is there a way to check what is drawing power while it's turned off? Or is it a matter of going around checking everything with one of those current testers (with the light in it)?

Just a side note, the ignition, I discovered today that there is another position for the key, I thought off was straight up and down, but I managed to turn it one more position to the left, is that true off? Would that be my issue with the battery down?

Thanks all, sorry if this is a rookie question

Cheers
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 08-28-2016, 03:03 AM   #2
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Sorry, should also say, that the GEN light stays on for about 1-2 hours after it's been switched off and the key removed.

Not grounded properly? Would this be causing the drain?

Cheers
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 08-28-2016, 07:14 AM   #3
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
Re: Battery/Ignition question







__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 08-28-2016, 03:13 PM   #4
DPowers
One foot in front of the other
 
DPowers's Avatar
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,440
Re: Battery/Ignition question

I believe your truck is a '64 correct? Originally on your truck Off would be straight up and down as the Accessory option didn't come out until later.

http://67-72chevytrucks.com/vboard/s...d.php?t=464891

Sounds to me that you have a short somewhere. VetteVet would be the man to contact.
DPowers is offline   Reply With Quote
Old 08-28-2016, 03:51 PM   #5
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Awesome thanks heaps! Good to know that it's up and down for off. Must be a loose barrel that lets me move the key to the left.

I'll investigate the GEN light staying on too, as that might be contributing to the draining of the battery.

Cheers,
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 09-04-2016, 02:38 PM   #6
ironman3452
Registered User
 
ironman3452's Avatar
 
Join Date: Feb 2015
Location: las cruces
Posts: 218
Re: Battery/Ignition question

Quote:
Originally Posted by DPowers View Post
I believe your truck is a '64 correct? Originally on your truck Off would be straight up and down as the Accessory option didn't come out until later.

http://67-72chevytrucks.com/vboard/s...d.php?t=464891

Sounds to me that you have a short somewhere. VetteVet would be the man to contact.
mine has an accessory on the switch, mine is a 64 c30 panel
ironman3452 is offline   Reply With Quote
Old 08-29-2016, 01:00 AM   #7
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Battery/Ignition question

OR the switch has been replaced with one that has an ACC position ..... As for how to check for drain when everything is "OFF" pull the + cable off the battery and place your test "light" in between the post and the cable see if it lights up at all the more drain the brighter it will be ....Bad diodes in the alternator will drain the battery in short order and may be why the "GEN" light stays on
jtrichard is offline   Reply With Quote
Old 08-29-2016, 01:03 AM   #8
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Quote:
Originally Posted by jtrichard View Post
OR the switch has been replaced with one that has an ACC position ..... As for how to check for drain when everything is "OFF" pull the + cable off the battery and place your test "light" in between the post and the cable see if it lights up at all the more drain the brighter it will be ....Bad diodes in the alternator will drain the battery in short order and may be why the "GEN" light stays on
Awesome, cheers mate, will give that a crack this week.

(I visited Joshua Tree NP last week, wicked place! - I did see a flat black 64-66 C10 driving around with no hood in the area haha)
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 08-29-2016, 01:32 AM   #9
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Battery/Ignition question

Wish i had known you could have came by and looked at my junk I mean collection LOL you were within 5 miles of my place
jtrichard is offline   Reply With Quote
Old 08-29-2016, 01:54 AM   #10
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Quote:
Originally Posted by jtrichard View Post
Wish i had known you could have came by and looked at my junk I mean collection LOL you were within 5 miles of my place
Haha next time! We were staying in Palm Springs. I'm pretty sure we'll be back again, pretty cool out those ways
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 08-29-2016, 02:23 AM   #11
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Battery/Ignition question

What gate did you use to enter the park?
jtrichard is offline   Reply With Quote
Old 08-29-2016, 03:34 AM   #12
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Quote:
Originally Posted by jtrichard View Post
What gate did you use to enter the park?
West entrance in Joshua Tree town (we stopped at the visitor centre with the gift shop across the road) and we did a loop and exited down the road (Oasis maybe?). Skull rock is pretty choice!
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 08-29-2016, 03:57 AM   #13
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Battery/Ignition question

YEAH you were less than 4 miles from me
jtrichard is offline   Reply With Quote
Old 09-03-2016, 03:48 AM   #14
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

So at a mates place today and went to start the car and it almost turned over then when I went to start it again, nothing. I took the key out and then put it back in and started it first pop.

My mate that was there used to be a mechanic and he said check the starter, solenoid and the ground. Could be the issue there. That could be draining the battery too apparently

Cheers
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 09-03-2016, 05:44 PM   #15
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,212
Re: Battery/Ignition question

If the alt. light stays on you definetly have a shorted diode in the alt. That will run down the battery.
Wrenchbender Ret is offline   Reply With Quote
Old 09-04-2016, 01:53 AM   #16
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Quote:
Originally Posted by Wrenchbender Ret View Post
If the alt. light stays on you definetly have a shorted diode in the alt. That will run down the battery.
Yea the gen light stays on for at least a couple of hours after taking the key out after running. So definitely sounds like what you are saying. The alt is fairly new (previous owner) so will get it checked out to see

Cheers for your advice
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Old 09-03-2016, 11:07 PM   #17
Lowl!f3
Registered User
 
Lowl!f3's Avatar
 
Join Date: Oct 2012
Location: Crosby, Tx
Posts: 300
Re: Battery/Ignition question

Hey just so you know. A buddy of mine from this site. Had an issue with battery drain. And a weird flicker in lights. It turned out his ignition was shorting out inside or something. He swapped it out and it's all good to go now.
__________________
1965 C10 Project
Lowl!f3 is offline   Reply With Quote
Old 09-04-2016, 01:54 AM   #18
phraza
Registered User
 
phraza's Avatar
 
Join Date: Jun 2016
Location: Auckland, New Zealand
Posts: 146
Re: Battery/Ignition question

Quote:
Originally Posted by Lowl!f3 View Post
Hey just so you know. A buddy of mine from this site. Had an issue with battery drain. And a weird flicker in lights. It turned out his ignition was shorting out inside or something. He swapped it out and it's all good to go now.

Awesome thank you, will put this on the list to check. Cheers!!
__________________
Fraser - New Zealand

1964 Chevy C10 Stepside
350 V8

Build thread here
phraza is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com