20/22" steelies? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigPun76 · 10-27-2007, 01:52 PM

Hey, guys, needing some info from y'all. I've been working on my '68 short/wide project for umm 9 years now LOL and I'll probably be working on it another 9 years, but anyways, I'm seriously thinking about putting some 20/22" steel wheels (dunno if they'll be smoothies or even maybe a rally-type wheel) on it. Who would be a good supplier to get these from? I think Stockton can make a set for me but after that I can't think of anyone else. I've done a search and have found people that make steel wheels but usually they only go up to 17" or 18". Any help would be appreciated!

Allen

c10addict · 10-27-2007, 04:47 PM

Just a little secret! Dodge has 20" steel wheels under the ram trucks and lincoln has them under their trucks and SUV's for spares. they are not the same bolt pattern

you can buy bolt on adaptors... the style is not really attractive

I have seen a set with the holes welded over and smoothed. Been wanting to pull this off for a while and probably will on my shop truck project..

Trey` · 10-27-2007, 09:02 PM

That is a interesting idea c10 addict with the oe wheels. I have not seen any that large that were not billet but have not called Stockton.

sixnine · 10-27-2007, 09:21 PM

Day-um c10addict! You're giving away my secrets!

Seriously though, I've never seen it done and so thought I was the only one that had considered using the Dodge factory spares and some adapters....do you have any pics of them on a Chevy truck?

c10addict · 10-27-2007, 09:44 PM

thanks for the props guys... I was under a ram and saw one and thought Woooooooooooooaaaaaaaaahhhhhhhhh! Holly f*ck would you look at that!!! I just dont like all the holes... I have seen a set on the back of a rat rod narrowed and smoothed though... My shop truck might get a set....

powell72 · 10-27-2007, 10:46 PM

Don't neglect a brake upgrade, those will be some HEAVY wheels. Sounds like a cool idea though. If someone pulls it off they better get pics!!!

SCOTI · 10-27-2007, 11:35 PM

Quote:

Originally Posted by powell72

....If someone pulls it off they better get pics!!!

If ?????????

sixnine · 10-27-2007, 11:39 PM

So it's been done? I have wondered what the backspacing on the Dodge wheel is because the thinnest adapters I could find were these...I ordered one of these last week just to see if the wheel I have will fit.

http://www.adaptitusa.com/index.asp?...ROD&ProdID=128

powell72 · 10-28-2007, 10:02 PM

Quote:

Originally Posted by SCOTI

If ?????????

Don't bogart those pics my friend!

'68 C-20 · 10-30-2007, 05:42 PM

Quote:

Originally Posted by powell72

Don't neglect a brake upgrade, those will be some HEAVY wheels. Sounds like a cool idea though. If someone pulls it off they better get pics!!!

My C-20 is factory stock with 17 inch wheels, Do you really think that these new wheels are any heavier than my old 17 inch wheels?

-Quinn

powell72 · 10-30-2007, 10:40 PM

Quote:

Originally Posted by '68 C-20

My C-20 is factory stock with 17 inch wheels, Do you really think that these new wheels are any heavier than my old 17 inch wheels?

-Quinn

Possibly, but we're talking 1/2 ton with these wheels.

c10addict · 11-19-2007, 10:35 PM

Quote:

Originally Posted by sixnine

So it's been done? I have wondered what the backspacing on the Dodge wheel is because the thinnest adapters I could find were these...I ordered one of these last week just to see if the wheel I have will fit.

http://www.adaptitusa.com/index.asp?...ROD&ProdID=128

well you have had plenty of time to get that adapter.... well??????????

oldspowered67C10 · 11-22-2007, 09:15 PM

Im pretty sure that stockton wheel sells a 20" steel wheel, its a military barrel which they just weld a passenger car center into, not sure about 22s though.

gringoloco · 10-30-2007, 06:54 AM

That's a 20x9 wheel with +19mm offset(6" backspacing), so with a 1.25" adapter, you're lookin' at around 4.75" backspacing. Perfect! Quit holdin' out on us Scot...

Now- who makes trim rings that big?

SCOTI · 10-30-2007, 12:45 PM

Quote:

Originally Posted by gringoloco

Now- who makes trim rings that big?

Nobody. But, there's ways around that....

gringoloco · 10-30-2007, 12:56 PM

Quote:

Originally Posted by SCOTI

Nobody. But, there's ways around that....

Hmmm... PM'd you.

c10addict · 10-30-2007, 02:26 PM

Dont leave me out on these trim rings!!!

kevncar · 02-22-2008, 10:43 PM

Quote:

Originally Posted by SCOTI

Nobody. But, there's ways around that....

Scoti,

Any details for us??? Especially with some pics?

c10addict · 02-23-2008, 11:31 AM

Quote:

Originally Posted by kevncar

Scoti,

Any details for us??? Especially with some pics?

All you gotta do is get the lip Chromed... I do not want trim rings so No chrome for me!

SCOTI · 02-23-2008, 12:23 PM

Quote:

Originally Posted by c10addict

All you gotta do is get the lip Chromed...

**N2TRUX** · 02-27-2008, 03:30 AM

Quote:

Originally Posted by c10addict

All you gotta do is get the lip Chromed.....

Easier said than done, and would not be cheap.

IvelDesigns · 10-30-2007, 02:59 PM

seriously... don't leave the details out man. trim rings and baby moons on a 20" steelies would look great on a c-10 IMO.

KFreddy · 10-30-2007, 03:59 PM

Those Dodge and Lincoln wheels are 20x8 not 20x9. However stockton and pete paulson wheels can use them as cores to widen them and get the correct or for that matter any bolt pattern. But your looking at at least $200 per wheel for the work in addition to the cost of the wheels. The largest steel core currently available is 17" so it will be a while until either of those companies offer a wheel of a larger size at a reasonable price... sux

slammed1 · 01-26-2008, 11:53 AM

In winter I would run 4 spare 20" rims on mine while the 22's were in the garage. A friends really funny photoshop cop truck came out afterwards.

1LoC10 · 01-26-2008, 12:22 PM

you could always get these Centerlines, and powder coat them black

10-27-2007, 01:52 PM	#1
BigPun76 Registered User Join Date: Aug 2002 Location: Nacogdoches, TX Posts: 27	20/22" steelies? Hey, guys, needing some info from y'all. I've been working on my '68 short/wide project for umm 9 years now LOL and I'll probably be working on it another 9 years, but anyways, I'm seriously thinking about putting some 20/22" steel wheels (dunno if they'll be smoothies or even maybe a rally-type wheel) on it. Who would be a good supplier to get these from? I think Stockton can make a set for me but after that I can't think of anyone else. I've done a search and have found people that make steel wheels but usually they only go up to 17" or 18". Any help would be appreciated! Allen

10-27-2007, 04:47 PM	#2
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? Just a little secret! Dodge has 20" steel wheels under the ram trucks and lincoln has them under their trucks and SUV's for spares. they are not the same bolt pattern you can buy bolt on adaptors... the style is not really attractive I have seen a set with the holes welded over and smoothed. Been wanting to pull this off for a while and probably will on my shop truck project.. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-27-2007, 09:02 PM	#3
Trey` Active Member Join Date: Oct 2004 Location: Cooks Point,Texas Posts: 238	Re: 20/22" steelies? That is a interesting idea c10 addict with the oe wheels. I have not seen any that large that were not billet but have not called Stockton. __________________ '70 Chevy stepside, ECE discs & 4/6, '00 GMC ext. cab stepside, never ending project '07 GMC Crew Cab, 24's & 5/7 "We, the unwilling, led by the unquailified, have been doing the unbelievable for so long with so little, we now attempt, the impossible with nothing"

10-27-2007, 09:21 PM	#4
sixnine Longtime Member Join Date: Oct 2002 Location: Over Yonder (DFW) Posts: 171	Re: 20/22" steelies? Day-um c10addict! You're giving away my secrets! Seriously though, I've never seen it done and so thought I was the only one that had considered using the Dodge factory spares and some adapters....do you have any pics of them on a Chevy truck? __________________ Rokcrln - *"I'm a major car addict so trying to go as low buck as possible is like asking a coke head to use flower to save money."* 1972 C10 Short Step -http://67-72chevytrucks.com/vboard/s...d.php?t=261405

10-27-2007, 09:44 PM	#5
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? thanks for the props guys... I was under a ram and saw one and thought Woooooooooooooaaaaaaaaahhhhhhhhh! Holly fck would you look at that!!! I just dont like all the holes... I have seen a set on the back of a rat rod narrowed and smoothed though... My shop truck might get a set.... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile*

10-27-2007, 10:46 PM	#6
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: 20/22" steelies? Don't neglect a brake upgrade, those will be some HEAVY wheels. Sounds like a cool idea though. If someone pulls it off they better get pics!!! __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html Last edited by powell72; 10-27-2007 at 10:48 PM.

10-27-2007, 11:39 PM	#8
sixnine Longtime Member Join Date: Oct 2002 Location: Over Yonder (DFW) Posts: 171	Re: 20/22" steelies? So it's been done? I have wondered what the backspacing on the Dodge wheel is because the thinnest adapters I could find were these...I ordered one of these last week just to see if the wheel I have will fit. http://www.adaptitusa.com/index.asp?...ROD&ProdID=128 __________________ Rokcrln - *"I'm a major car addict so trying to go as low buck as possible is like asking a coke head to use flower to save money."* 1972 C10 Short Step -http://67-72chevytrucks.com/vboard/s...d.php?t=261405 Last edited by sixnine; 10-27-2007 at 11:42 PM.

11-22-2007, 09:15 PM	#13
oldspowered67C10 Registered User Join Date: Jan 2006 Location: Cherry Valley,Ca Posts: 468	Re: 20/22" steelies? Im pretty sure that stockton wheel sells a 20" steel wheel, its a military barrel which they just weld a passenger car center into, not sure about 22s though.

10-30-2007, 06:54 AM	#14
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 20/22" steelies? That's a 20x9 wheel with +19mm offset(6" backspacing), so with a 1.25" adapter, you're lookin' at around 4.75" backspacing. Perfect! Quit holdin' out on us Scot... Now- who makes trim rings that big? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 10-30-2007 at 06:58 AM.

10-30-2007, 02:26 PM	#17
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? Dont leave me out on these trim rings!!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-30-2007, 02:59 PM	#22
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 20/22" steelies? seriously... don't leave the details out man. trim rings and baby moons on a 20" steelies would look great on a c-10 IMO. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

10-30-2007, 03:59 PM	#23
KFreddy Active Member Join Date: Apr 2005 Location: Miami, Florida Posts: 286	Re: 20/22" steelies? Those Dodge and Lincoln wheels are 20x8 not 20x9. However stockton and pete paulson wheels can use them as cores to widen them and get the correct or for that matter any bolt pattern. But your looking at at least $200 per wheel for the work in addition to the cost of the wheels. The largest steel core currently available is 17" so it will be a while until either of those companies offer a wheel of a larger size at a reasonable price... sux __________________ "The Great State of Florida"

01-26-2008, 11:53 AM	#24
slammed1 1972 Chevrolet SWB Join Date: Jan 2008 Location: FT Smith AR Posts: 512	Re: 20/22" steelies? In winter I would run 4 spare 20" rims on mine while the 22's were in the garage. A friends really funny photoshop cop truck came out afterwards. __________________ My New thread with pics (not my build thread yet.) http://67-72chevytrucks.com/vboard/s...46#post2573646 1972 Chevrolet 1/2 ton short wide bed,68 frt clip Project. 1980 Camaro Inherited when father passed,68K Miles 2003 Ford Mach1 FUN as Hell!! 2002 Dodge Ram 5-8 slam Rolling BillBoard (Gone not forgot) 2004 Dodge Ram HEMI 10" lifted on 37's and 2wd.

01-26-2008, 12:22 PM	#25
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: 20/22" steelies? you could always get these Centerlines, and powder coat them black __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.