![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2004
Location: Fort Leonard Wood Mo
Posts: 299
|
I need a new windshield...Help rust!!!
How much do these usually cost? Does anyone have a good used one? Its cracked over half of the windshield... It goes under and out of the drivers line of sight... It passed inspection. But here on post the Military Police said they could ticket me for a safety violation, saying it's unsafe... ugh. And the glass is kinda junked up and scratched... What about the rubber seal do I need to buy one of those or does that glass company have one of those???
Thanks for the help! Also what does it cost if I have to get the metal fixed around the windshield if its rusted. The glass guy was worried it could be rusted. See my last post for more details.
__________________
![]() ![]() 400sb-350 crank 400 destroker!!! 377 2.02 dart pro1 alum.heads msd, holley db hooker pro-comps-3in exh. 3 spd. saginaw-3.73posi Flat Bed...want Reg bed...trades? Last edited by cobb_ben; 07-01-2008 at 06:37 PM. Reason: need more help |
![]() |
![]() |
![]() |
#2 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: I need a new windshield...
id say 150...........
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2008
Location: Chesapeake Beach, MD
Posts: 812
|
Re: I need a new windshield...
should always replace the seal with a new windshield.
![]()
__________________
71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 ![]() http://i195.photobucket.com/albums/z...en58/001-2.jpg |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
Re: I need a new windshield...
I got a new tinted and shaded one installed with new seal for $160 in my driveway about 3 years ago. Make sure you get a good quality one. I had a cheap one on before and it was like a big egg shell and cracked on the first very light contact. I forget what you need to look for,maybe try the search function on here.
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
![]() |
![]() |
![]() |
#5 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: I need a new windshield...
350 installed.....I surely hope people are not paying that much....glass 100.00 bucks at swap meets all day.........windshield moldings 45-50.......install it your self.....They are easy
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2003
Location: New Orleans area
Posts: 198
|
Re: I need a new windshield...
It's so easy, the local glass shop broke the 1st windshield they tried to install in my '67
![]()
__________________
'67 C20 small window Fleetside - 250 inline 6 - 3 on the tree - heavy duty clutch, brakes, rear springs - 17.5 wheels w/bias ply tires - AM radio - heater. |
![]() |
![]() |
![]() |
#7 |
Do the Dew!
Join Date: May 2005
Location: Vernal, Utah
Posts: 191
|
Re: I need a new windshield...
|
![]() |
![]() |
![]() |
#8 |
MOVE OVER
Join Date: Jun 2002
Location: Warrensburg, MO
Posts: 5,470
|
Re: I need a new windshield...
just take your time installing it yourself, and use new mouldings,, and dont force it... I've done a few windshields and actually broke one installing it.. I used soapy water as well to help guide it in...
__________________
No matter where you are..... There you are... Buckaroo Banzi |
![]() |
![]() |
![]() |
#9 |
Gettin By on Gettin By
Join Date: Jan 2008
Location: Cedar Creek, Tx
Posts: 1,033
|
Re: I need a new windshield...
$200 even around here for one with new rubber for the chrome trim. Thats for "come to you" installed.
__________________
69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Jan 2008
Location: Chesapeake Beach, MD
Posts: 812
|
Re: I need a new windshield...
now im being told this by my glass guy at my work (work at a dealership) he said that the ones with chrome trim are a PITA. says its hard to keep the trim from popping out. and hes been workin on glass since before these trucks were made
![]()
__________________
71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 ![]() http://i195.photobucket.com/albums/z...en58/001-2.jpg |
![]() |
![]() |
![]() |
#11 |
More Cowbell....
Join Date: Mar 2004
Location: Puckett, MS
Posts: 3,569
|
Re: I need a new windshield...
I have done every one of mine. The "installers" all complain about it. Their new motto is:
IF WE CAN'T GLUE IT, WE CAN'T DO IT
__________________
There once was a member from Puckett.....Who ( fill in the blank blank blank ) bucket |
![]() |
![]() |
![]() |
#12 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: I need a new windshield...
lol.....putter heard the same....When i put sweet peas in i will do a write up.....its easy a little rope and soap and your good to go...............
|
![]() |
![]() |
![]() |
#13 |
Who's got steelies?
![]() Join Date: Feb 2006
Location: Morrison, Oklahoma
Posts: 1,026
|
Re: I need a new windshield...
Had a new windshield installed about a month ago. Was about $220 glass, rubber, labor. They came and did it at my work. Now driving at night is much nicer!
__________________
![]() ![]() ![]() ![]() ![]() ![]() How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel |
![]() |
![]() |
![]() |
#14 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,505
|
Re: I need a new windshield...
-
I just bought a new tinted/shaded windshield, $80 cash & carry from a glass shop about 30 miles form me... Let's see, if you figure in gas for the White Truck to go and get it that would be about $200 total... ![]() I install all of my own. A local guy said he was quoted $200 installed a while back. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 06-01-2008 at 03:16 AM. |
![]() |
![]() |
![]() |
#15 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: I need a new windshield...
Be sure and watch what windshield you are buying. Anything other than the PPG, or LOF factory replacement glass will likely be bubbled. If you look at it and it isn't flat across the front your wipers will not touch the glass all the way. Then you will think that your wipers are bad. Remember cheaper sometimes comes at a cost. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 06-01-2008 at 07:12 PM. |
![]() |
![]() |
![]() |
#16 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: I need a new windshield...
PPG for me
![]()
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Feb 2004
Location: Fort Leonard Wood Mo
Posts: 299
|
Re: I need a new windshield...
The glass guy came out to day to do my windshield. He said that he will not do it because the cab is a little rusty around the windshield also one small hole on the bottom of the A-pillar. Then when he pulled the seal down there was some rust on the seal. He said the back side of the metal looked good. But you never know when you pull the seal if the rest of the metal will be rusted and if its bad he can't put the windshield. So he said that we have to do at a body shop. That way if it is bad then they can fix it. HOW MUCH DOES THIS COST TO GET THE METAL FIXED IF ITS RUSTED. That is my question please help me!!! And let me know please THX guys!
-Ben
__________________
![]() ![]() 400sb-350 crank 400 destroker!!! 377 2.02 dart pro1 alum.heads msd, holley db hooker pro-comps-3in exh. 3 spd. saginaw-3.73posi Flat Bed...want Reg bed...trades? |
![]() |
![]() |
![]() |
#18 |
upgrading to an older model
Join Date: Aug 2007
Location: Sacramento, KY
Posts: 346
|
Re: I need a new windshield...
I know this is a little vague but so is my memory...I saw on one of those truck shows (spike TV, or SPEED) where they installed a new windshield and they made it look VERY easy. put a rope in the outer channel of the seal then layed the windshield into place, then pulled the rope out from inside the truck, thus pulling the seal with it. Sounds easy enough!
__________________
68 stepside, short-box, multi-colored (for now) ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#19 | |
Hellasick
![]() Join Date: Jul 2006
Location: Death Moans, IA
Posts: 876
|
Re: I need a new windshield...
Quote:
__________________
I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys Last edited by 70C10Toejam; 07-01-2008 at 11:44 PM. |
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Feb 2004
Location: Fort Leonard Wood Mo
Posts: 299
|
Re: I need a new windshield...
That does not answer my question guys please help. THX
__________________
![]() ![]() 400sb-350 crank 400 destroker!!! 377 2.02 dart pro1 alum.heads msd, holley db hooker pro-comps-3in exh. 3 spd. saginaw-3.73posi Flat Bed...want Reg bed...trades? |
![]() |
![]() |
![]() |
#21 |
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,037
|
Re: I need a new windshield...
First thing you need to do is find out exactly how bad this rust is.
"Then when he pulled the seal down there was some rust on the seal. He said the back side of the metal looked good. But you never know when you pull the seal if the rest of the metal will be rusted and if its bad he can't put the windshield." From what the guy said there could be no problem at all or cancer waiting for you under the seal. So if you need a new windshield any way you need to expose the area to see what you have. Pictures of the exposed area in question would help us help you know what you are getting into? That area is a hard one to fix and fix right if you don't have the skills required. The best way to find out how much it will cost is to find out how far the cancer has spread and get some quotes form as many repratable auto body shops you can find. If you can post some pictures that show the extent of the rust we may be able to help you get a rough idea of how much it will cost. But the first thing you need to do is find out what if any problem exists.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Feb 2004
Location: Fort Leonard Wood Mo
Posts: 299
|
Re: I need a new windshield...
Yea I was kind of just wanting to know how much this kind of work would cost. Because the windsheild guy said he wont pull it without it being on an autobody shop lot. I was wondering how much it might cost if I find out it is bad. Rough estimates so I can save money so that if I do have to get the work done. I dont think it is that bad...
__________________
![]() ![]() 400sb-350 crank 400 destroker!!! 377 2.02 dart pro1 alum.heads msd, holley db hooker pro-comps-3in exh. 3 spd. saginaw-3.73posi Flat Bed...want Reg bed...trades? |
![]() |
![]() |
![]() |
#23 |
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,037
|
Re: I need a new windshield...
It could be $100 or it could be $1000. I know that is not what you want to hear but with out knowing how much and what areas need to be fix or who is doing the work it is not an area that can be easily estimated. There are no after market replacement parts for this area like most of the other body panels on these trucks so they would need to be built from scratch. I wish I could give you an estimate but that is not possible with out having a rough idea of the problem area. Look under your dash, inside your cowl and try to see if you can see any rust problems. If it is not your daily driver I would pull out the window and seal on your own it is not that hard. Even replacing the windshield is not that hard if you have a friend and use the right technique. If you decide to do it your self let us know and we can help walk you through the process and once you get the window out post some pictures so we can help you with your rust problem if you even have one. Sorry I can't be more help.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. |
![]() |
![]() |
![]() |
Bookmarks |
|
|