Project '64 C-10 Truck - built in Germany - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fabian · 06-19-2011, 03:02 PM

Hey,

this is my first '64 C-10 Truck project being built in Germany. I have to thank a few people who really help on this, especially Pat, Del and Nate. It is quite a hassle to get all these parts sent over here, ... and these poeple really help to make this happeining.

C-10 will have
a full PorterBuilt chassis
Del´s 22" Centerline specials
complete AccuAir Kit
CCP drop spindles and 13“ disc brakes
LS1 with 4L60E
Porterbuilt gas tank
Moser 9“ rear end with Detroit locker
ididit steering column with Billet Specialties steerig wheel
Autometer Gauges
VintageAir AC
AmericanAutoWire harness, ...

I bought the truck from Texas, and it really has some great patina. I will just clear the paint with some CLR and than just get it either clear coted or polished. I want to keep the beautiful sun baked Texas patina on it.

Truck arrived few weeks ago and today Pat and I drove it to my little garage. We started to work an it and get the front clip off the truck.... With the help of Pat we will dissaseble the complete chassis the next weeks and wait for the parts to arrive in Germany.

Fabian

Fabian · 06-20-2011, 01:39 AM

Fabian · 06-20-2011, 01:40 AM

Fabian · 06-20-2011, 01:43 AM

Delmo · 06-20-2011, 12:39 PM

Great lookin truck man. This is gunna be good.

67chevy1series · 06-20-2011, 03:36 PM

great to see some more germans here!

Fabian · 06-21-2011, 02:32 PM

Dino. Pat and I live 10 mins. from each other. My truck was in his garage for some time and now at my place. We will built it together and I am looking really forward to built it.
Posted via Mobile Device

Dinos63 · 06-21-2011, 02:53 PM

Quote:

Originally Posted by fabian

dino. Pat and i live 10 mins. From each other. My truck was in his garage for some time and now at my place. We will built it together and i am looking really forward to built it.
posted via mobile device

thats cool fabain tell patand wife hi ! And i am lookin foward to the build

jimmydean · 06-21-2011, 03:32 PM

This build is going to be great! Good looking patina for sure.

Fabian · 06-22-2011, 05:22 PM

We had some more time today to work on the truck and got quite a few things done ... I bought this new Milwaukee Tool and it was great fun and saved us a lot of hours!

Can not wait to get the all parts shipped to Germany and start building Nate´s dropkit in and all the other parts,...

Very solid floors ..

Fabian · 06-22-2011, 05:23 PM

Fabian · 06-22-2011, 05:24 PM

Done!

Fabian · 06-22-2011, 05:26 PM

SulphuriousSam · 06-23-2011, 09:46 AM

Das ist gut! Subscribed

mglumpkin · 06-23-2011, 03:38 PM

Very Nice Work Fabian and I love what your plans are, I did not know Porterbuilt made a gas tank for our truck, I have a 64 as well?

Fabian · 06-23-2011, 03:40 PM

Quote:

Originally Posted by mglumpkin

Very Nice Work Fabian and I love what your plans are, I did not know Porterbuilt made a gas tank for our truck, I have a 64 as well?

Will come out soon

and I am sure you will see pictures of it here in a few ...

mglumpkin · 06-23-2011, 03:54 PM

Quote:

Originally Posted by Fabian

Will come out soon

and I am sure you will see pictures of it here in a few ...

Can't Wait, I'm excited for you, we basically have the same truck and very similar ideas, only difference is I'm going for more of performance drive-ability and stance, rather than complete body drop. Waiting for Nate to finish up the coil-over drop-member and getting the 22's from Del with a different color, not black.

Fabian · 06-25-2011, 04:22 PM

Next steps ...

Me and Pat have finished to take apart the truck and will start to work on the cab next. The floors are pretty solid, but still need some detailing and welding. I will get the wagon completly blasted from the insite, firewall and belly. After I will start working on the firewall and get it smoothend and cleaned and freshly painted. My truck is in tan, does anyone have the original color code for me? I will get the floors done also and than freshly paint the complete insite, I am not sure what color I will do the insite, if same as outsite or something else... once this is done I will lay out some dyno matts to get heat and noise out. Also the bed needs quite some detail as there are some bad dings insite and try to get this smoothend out as good as possible with not ruining the patina.

Still a lot of work to be done and new things and ideas coming up ....

Fabian

198plus · 06-26-2011, 12:59 PM

Lookin forward to this one !!!!!!

Dinos63 · 06-26-2011, 07:39 PM

NICE WORK!! AND WHOS OWNS THE FORK LIFT??

1Bad62Pro/Street · 06-26-2011, 09:12 PM

Nice truck and Impala!

**TR65** · 06-26-2011, 10:45 PM

Fabian,

Here are the 65 colors. So in 65 the color would be Fawn with Fawn-Metallic interior.

http://67-72chevytrucks.com/vboard/s...d.php?t=471383

I think the 64 color chart is somewhere on the forum.

Good looking project.

TR

Fabian · 06-30-2011, 01:08 PM

Quote:

Originally Posted by Dinos63

NICE WORK!! AND WHOS OWNS THE FORK LIFT??

Fabian · 06-30-2011, 01:11 PM

Just a small update,... the body is completely stripped and today I dropped it off at the blasters.

I hopefully have it back by tomorrow and will primer the blasted parts and than we will start working on the floors, etc...

Fabian · 07-01-2011, 03:54 AM

I really need some help! Can anyone please give me the color code of my original paint! Please please please

!

06-19-2011, 03:02 PM	#1
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Project '64 C-10 Truck - built in Germany Hey, this is my first '64 C-10 Truck project being built in Germany. I have to thank a few people who really help on this, especially Pat, Del and Nate. It is quite a hassle to get all these parts sent over here, ... and these poeple really help to make this happeining. C-10 will have a full PorterBuilt chassis Del´s 22" Centerline specials complete AccuAir Kit CCP drop spindles and 13“ disc brakes LS1 with 4L60E Porterbuilt gas tank Moser 9“ rear end with Detroit locker ididit steering column with Billet Specialties steerig wheel Autometer Gauges VintageAir AC AmericanAutoWire harness, ... I bought the truck from Texas, and it really has some great patina. I will just clear the paint with some CLR and than just get it either clear coted or polished. I want to keep the beautiful sun baked Texas patina on it. Truck arrived few weeks ago and today Pat and I drove it to my little garage. We started to work an it and get the front clip off the truck.... With the help of Pat we will dissaseble the complete chassis the next weeks and wait for the parts to arrive in Germany. Fabian

06-20-2011, 01:39 AM	#2
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany

06-20-2011, 01:40 AM	#3
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany

06-20-2011, 01:43 AM	#4
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany

06-20-2011, 12:39 PM	#5
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: Project '64 C-10 Truck - built in Germany Great lookin truck man. This is gunna be good.

06-20-2011, 03:36 PM	#6
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project '64 C-10 Truck - built in Germany great to see some more germans here!

06-21-2011, 02:32 PM	#7
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany Dino. Pat and I live 10 mins. from each other. My truck was in his garage for some time and now at my place. We will built it together and I am looking really forward to built it. Posted via Mobile Device

06-21-2011, 03:32 PM	#9
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Project '64 C-10 Truck - built in Germany This build is going to be great! Good looking patina for sure. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

06-22-2011, 05:22 PM	#10
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany We had some more time today to work on the truck and got quite a few things done ... I bought this new Milwaukee Tool and it was great fun and saved us a lot of hours! Can not wait to get the all parts shipped to Germany and start building Nate´s dropkit in and all the other parts,... Very solid floors ..

06-22-2011, 05:23 PM	#11
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany

06-22-2011, 05:24 PM	#12
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany Done!

06-22-2011, 05:26 PM	#13
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany

06-23-2011, 09:46 AM	#14
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: Project '64 C-10 Truck - built in Germany Das ist gut! Subscribed __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

06-23-2011, 03:38 PM	#15
mglumpkin Registered User Join Date: Oct 2010 Location: Brentwood California Posts: 8	Re: Project '64 C-10 Truck - built in Germany Very Nice Work Fabian and I love what your plans are, I did not know Porterbuilt made a gas tank for our truck, I have a 64 as well?

06-25-2011, 04:22 PM	#18
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany Next steps ... Me and Pat have finished to take apart the truck and will start to work on the cab next. The floors are pretty solid, but still need some detailing and welding. I will get the wagon completly blasted from the insite, firewall and belly. After I will start working on the firewall and get it smoothend and cleaned and freshly painted. My truck is in tan, does anyone have the original color code for me? I will get the floors done also and than freshly paint the complete insite, I am not sure what color I will do the insite, if same as outsite or something else... once this is done I will lay out some dyno matts to get heat and noise out. Also the bed needs quite some detail as there are some bad dings insite and try to get this smoothend out as good as possible with not ruining the patina. Still a lot of work to be done and new things and ideas coming up .... Fabian



Register or Log In To remove these advertisements.

06-26-2011, 12:59 PM	#19
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Project '64 C-10 Truck - built in Germany Lookin forward to this one !!!!!! __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

06-26-2011, 07:39 PM	#20
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Project '64 C-10 Truck - built in Germany NICE WORK!! AND WHOS OWNS THE FORK LIFT?? __________________ CHEVY ONLY... Nothin Else !

06-26-2011, 09:12 PM	#21
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project '64 C-10 Truck - built in Germany Nice truck and Impala! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

06-26-2011, 10:45 PM	#22
TR65 Senior Member Join Date: Nov 2007 Location: Greenville, SC Posts: 873	Re: Project '64 C-10 Truck - built in Germany Fabian, Here are the 65 colors. So in 65 the color would be Fawn with Fawn-Metallic interior. http://67-72chevytrucks.com/vboard/s...d.php?t=471383 I think the 64 color chart is somewhere on the forum. Good looking project. TR __________________ 1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880

06-30-2011, 01:11 PM	#24
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany Just a small update,... the body is completely stripped and today I dropped it off at the blasters. I hopefully have it back by tomorrow and will primer the blasted parts and than we will start working on the floors, etc...

07-01-2011, 03:54 AM	#25
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: Project '64 C-10 Truck - built in Germany I really need some help! Can anyone please give me the color code of my original paint! Please please please !

Register or Log In To remove these advertisements.