The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-30-2012, 12:11 AM   #1
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Height of body mounts

What's the height of front middle and back and core support mounts ?
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 01-31-2012, 07:57 PM   #2
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts

Can anyone measure them for me ? Thanks ?
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-03-2012, 06:08 AM   #3
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts

Can someone take like 10 min to go measure the middle sections and front rear of the body mounts on there blazer ?

All body mounts THANKS !!
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-04-2012, 07:37 AM   #4
tobiahr
Registered User
 
tobiahr's Avatar
 
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
Re: Height of body mounts

Quote:
Originally Posted by Dguzzardo22 View Post
Can someone take like 10 min to go measure the middle sections and front rear of the body mounts on there blazer ?

All body mounts THANKS !!
Posted via Mobile Device
what exactly do you want measured? the distance from the ground to the body mount? the thickness of the body mount? i could take 8 hours measuring all the various aspects of the body mounts and still not have the information you want because you have not properly defined it.
tobiahr is offline   Reply With Quote
Old 02-04-2012, 02:26 PM   #5
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts

The height as if all mounts were standing on a table from the top to bottom .

The height from body to frame .
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-04-2012, 09:16 PM   #6
tobiahr
Registered User
 
tobiahr's Avatar
 
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
Re: Height of body mounts

mine average 3/4 to 1 1/4 inches from body to frame, but they are old and need to be replaced. the radiator support mounts are only about 1/2inch but the rubber bushing is rotted to the point of non existance. that is also compressed thickness on all of them, if you are looking at material to replace them with you will need to take that into account.
tobiahr is offline   Reply With Quote
Old 02-04-2012, 09:18 PM   #7
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts

What about the middle body mount
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-06-2012, 01:05 AM   #8
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts


Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-06-2012, 01:23 AM   #9
tobiahr
Registered User
 
tobiahr's Avatar
 
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
Re: Height of body mounts

i just remembered the body mounts are different heights depending on year model. what year is yours? and did you cut the crossmember?
tobiahr is offline   Reply With Quote
Old 02-06-2012, 01:36 AM   #10
Dguzzardo22
Registered User
 
Join Date: Oct 2011
Location: Louisiana
Posts: 23
Re: Height of body mounts

Yes I cut mine for a wishbone link and driveshaft .

Mine is a 76 .
Posted via Mobile Device
Dguzzardo22 is offline   Reply With Quote
Old 02-06-2012, 01:49 AM   #11
tobiahr
Registered User
 
tobiahr's Avatar
 
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
Re: Height of body mounts

the measurement on mine would be different then. i have an 82. 73-76 should be the same. you might have better luck contacting a distributor and asking. i do see from the lmc catalog diagram that year and position is probably about 2 to 3 inches http://www.lmctruck.com/icatalog/csb/full.aspx?Page=36
tobiahr is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com