![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
car trailer winch wiring
I have a 18' car trailer w/ 4' split dove. It has a winch on it I'm just wondering what's the best way to run it? Am I best off running a deep cycle battery or running a set or cables to the truck with a relay wired in somehow or run power through the aux pole on my 7 flat wire plug? Never really had any experience with winches before. Thanks for any help or insight you guys can offer
Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,194
|
Re: car trailer winch wiring
Subscribing - I don't have a winch in my car trailer currently (24' Haulmark) but am looking to add one, and will be interested in any advice here.
K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
![]() |
![]() |
![]() |
#3 |
GoatLube Experss
![]() Join Date: Oct 2009
Location: clarksville, Tn.
Posts: 1,337
|
Re: car trailer winch wiring
I used a deep cycle battery on the trailer wire'd drectly to the winch, then a wire from the 7 pin plug to charge it as I drove, work'd good for me.
__________________
Goat Lube Express, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's) |
![]() |
![]() |
![]() |
#4 | |
a fool with no money
Join Date: May 2005
Location: Overton, Tx
Posts: 532
|
Re: car trailer winch wiring
Quote:
I am in the very process of doing this, and was just going to use my deep cycle, but I like this idea! ![]()
__________________
Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/ |
|
![]() |
![]() |
![]() |
#5 |
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: car trailer winch wiring
We took an old bent hitch and cut the neck off of it and welded on to the trailer. Bought a holder for the winch that will just slide in to the receiver. This way we can remove it when it is not in use and don't have to worry about theft or elements. The battery is kept inside the tongue box with the connecting wires poked through a hole. We test the battery every so often and charge it when we need to. It gets used about once a month or so at most though, not an every day use type thing.
I think that is about a $300 winch with the mount and everything, the tongue box was $50 and we had the old bent hitch laying in the shop already. We've only had to charge the battery once in a year or so.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
Re: car trailer winch wiring
I built a custom tongue box for mine. Out of a couple stainless steel outdoor electrical boxes, big enough to hold a battery plus tools and straps And on the back I welded the top four Inches of another box with lid That drops down to reveal winch. Its stainless. It locks and its completely weather tight. It just seems to pull hard. Its an older winch and the tabs on top of the sides, that hold the bolts to keep the sides true are broken off. And winch sat outside on the trailer before I got it. May be the problem too just wasn't sure if a relay could help. But is there anyway to keep the sides true with out the bolts and tabs? Is there a way to clean or replace the electric motor or brushes? It has two new selenoids on it
Posted via Mobile Device |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2000
Location: Blue Ridge, Tx
Posts: 1,172
|
Re: car trailer winch wiring
My buddy has a car hauler with a winch mounted under the deck and has a battery mounted on the tongue. I have a gooseneck trailer and plan on welding a receiver tube to the neck. In the mean time, I put the winch in the receiver of the truck and use a spare battery.
Posted via Mobile Device
__________________
Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this." |
![]() |
![]() |
![]() |
Bookmarks |
|
|