ID WTB Bed side patch panels

[zeusflash]

I need the front 16 inches of the left and right bed sides,the outer skin only. Looks like some took a framing hammer to the area around the bed side gas doors then filled the area with about an inch of filler. Would like to cut out and patch these areas. Need the patch to go just below the lower body line and just above the upper body curve. Top to bottom would be ok too. Without gas door hole would be best but not essential. See pic.

[mrdana60]

I got a bed that I may can cut it off of.let me check tomorrow.

[suville]

Im thinkin you could use a door skin for a repair piece

[zeusflash]

I thought about the door skin solution and I think toure right,just figured someone here had an old dead bed laying around. Let me know about those patches. Thanks

[Todd68Chevy]

I will need to check but if mrdana60 does not have it I have a few beds that could be cut up. If I get home before dark tomorrow I will check what I have incase he can not help.

[zeusflash]

Thanks guys appreciate the help

[MoreLoveThanMoney]

I definitely have some door skins and possible bed sides depending on how low it needs to go.
Posted via Mobile Device

[zeusflash]

Taped area in pic is the "must have" area of course a little extra is always nice.

[mrdana60]

The ones on my bed was junk. Sorry for the trouble.

[Todd68Chevy]

I have a good passenger side but out of 4 beds they all have some kind of dent on the drivers side. If you want to get them both from one person to save shipping, I understand. Here is what I have.

[Undone]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[MoreLoveThanMoney]

What are patch panels like this even worth? I've got a bed I may cut up that I could produce everybody's panels off of if it was worth the effort.
Posted via Mobile Device

[mrdana60]

i also need a patch for drivers side rear lower part. i could get pics if you got something you could cut thanks

[zeusflash]

Hey todd68chevy,let me know what you would want for that patch cut 2 inches from top to the bottom and 17-18 inches long measured from the front of the bed. Anyone else I still need a left patch,let me know what ya got.

[Todd68Chevy]

Originally Posted by zeusflash

Hey todd68chevy,let me know what you would want for that patch cut 2 inches from top to the bottom and 17-18 inches long measured from the front of the bed. Anyone else I still need a left patch,let me know what ya got.

$25.00 plus shipping. If I get home tomorrow night before dark I will measure the left side parts and see where 18 inches is compaired to the damage and maybe I can come up with both. Thanks

[zeusflash]

Sounds great to me. Let me know.

[zeusflash]

ttt

[Todd68Chevy]

Here is what I have cut off. Hope it is right. I need a zip code to figure shipping charges.

[zeusflash]

That will work. Shipping to 83854. Is the left one any good?

[Todd68Chevy]

Originally Posted by zeusflash

That will work. Shipping to 83854. Is the left one any good?

I need to get the packing in the box but looks like the shipping is going to be around $24.00. The left side on this truck has a hole in it for a second fuel fill and maybe some other damage. I do have an another truck that probably has the best panel out of the 4. it has a dent on the front edge and a dent in the side starting back about 16 inches. I should be home from work before dark tonight and I will try to get pictures. Because of the work/ time it takes to get it cut apart, I would still need $25.00 out of it. Looks like if I can get them both in the box I have now, the shipping would be around $32.00.

[zeusflash]

Sounds great let me know.

[zeusflash]

Hey Morelovethanmoney,I do need a right door skin patch(front 19 inches) if you are still interested in selling one. I need the area inside the tape line in the pic. I may also still need a left forward bed patch as shown in pic at start of thread.

[Todd68Chevy]

I figured out the picture problem. I had changed my camera settings for Thanksgiving pictures so they were higher quality and I forgot to change the camera settings back to email quality so they are to big. I will need to take more pictures or figure out how to shrink the other ones. Sorry

[zeusflash]

I have found another source for the rods and left bed patch possibly the door patch too. I do still want the right bed side patch that you cut out. If you can send me a total with shipping to 83854 and your prefered method of payment I will get the money to you ASAP.

[Todd68Chevy]

Originally Posted by zeusflash

I have found another source for the rods and left bed patch possibly the door patch too. I do still want the right bed side patch that you cut out. If you can send me a total with shipping to 83854 and your prefered method of payment I will get the money to you ASAP.

Great to hear you found the other parts. Sorry it has taken more so long to get this straightened out. The shipping USPS Parcel Post is $23.06 for a total of $48.06. I accept PayPal or Bank Money order. I will PM the details. Thanks