WI Wtb 1967 chevy truck clutch fan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 09-21-2014, 04:41 PM

Looking for a correct 1967 Chevy truck clutch fan, Thanks !

**jmader** · 09-21-2014, 05:16 PM

I have this one

http://67-72chevytrucks.com/vboard/s...d.php?t=632059

**60-66** · 09-21-2014, 07:15 PM

Could you do me a favor and measure the diameter of the hub that bolts to the water pump

**PICKMUP** · 09-21-2014, 08:24 PM

[B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys.

**60-66** · 09-21-2014, 09:14 PM

Quote:

Originally Posted by PICKMUP

[B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys.

Yes and no, I have an identical fan blade In every detail, but, the nos original gm clutch has a larger hub dia that I asked for the diameter on. It will not fit through the hole in the blade. I need the larger hole and bolt patern blade for the clutch to bolt to. Passenger car blades are smaller but look identical , trucks are larger in the center opening, that's why I asked.

**jmader** · 09-21-2014, 09:06 PM

Sure I'll get you a measurement of both the hub and the bolt pattern tomorrow.

**jmader** · 09-22-2014, 08:58 AM

Here are a couple pictures. It looks like the hub is just over 2 1/2 inches wide and the bolts are about 1 3/4 inches apart. Hope this helps.

**60-66** · 09-22-2014, 11:36 AM

That's the one ! PM next

**60-66** · 09-30-2014, 10:29 AM

Need one more as pictured above. Thanks

09-21-2014, 04:41 PM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Wtb 1967 chevy truck clutch fan Looking for a correct 1967 Chevy truck clutch fan, Thanks ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-21-2014, 05:16 PM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan I have this one http://67-72chevytrucks.com/vboard/s...d.php?t=632059 __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-21-2014, 07:15 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wtb 1967 chevy truck clutch fan Could you do me a favor and measure the diameter of the hub that bolts to the water pump __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-21-2014, 08:24 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,132	Re: Wtb 1967 chevy truck clutch fan [B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-21-2014, 09:06 PM	#6
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan Sure I'll get you a measurement of both the hub and the bolt pattern tomorrow. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-22-2014, 08:58 AM	#7
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan Here are a couple pictures. It looks like the hub is just over 2 1/2 inches wide and the bolts are about 1 3/4 inches apart. Hope this helps. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-22-2014, 11:36 AM	#8
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wtb 1967 chevy truck clutch fan That's the one ! PM next __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-30-2014, 10:29 AM	#9
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Wtb 1967 chevy truck clutch fan Need one more as pictured above. Thanks __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.