|
|
|
02-25-2004, 02:23 AM
|
#1 |
|
Beer Power!!!!!!!!!!
Join Date: Nov 2003
Location: Nacogdoches, TX
Posts: 280
|
Machine Shops
Anybody here know of or reccomend any machine shops here in East Texas? My 307 still runs good but is using some oil and I think it is time to freshen it up a bit.
Bye the way, how many times can you rebuild an entire engine? For example, if you were not going to bore it and have it balanced each time it is built. I have heard that engines are only good for one rebuild then the block is trash. Is that true?
__________________
Rather be fishin' |
|
|
|
02-25-2004, 05:30 AM
|
#2 |
|
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
Haven't used them yet, but I've heard good things from several sources about Thompson Performance in Henderson.
|
|
|
|
|
02-25-2004, 11:50 AM
|
#3 |
|
Account Suspended
Join Date: Dec 2003
Location: Delano, MN
Posts: 630
|
If you aren't boring out the cylinder bores or bearing journals the block will be fine. After enough running you will have to bore out the cylinder bores or you will have piston slap and excessive oil consumption with standard sized pistons. Higher nickel content blocks are more resilent to wear.
|
|
|
|
|
02-25-2004, 12:30 PM
|
#4 |
|
Registered User
Join Date: Jul 2003
Location: North Texas
Posts: 265
|
Bill Spence in Sherman is good. I've had many people recommend him. He
rebuilt a 350 in a '89 I had a few years ago. If you just want a basic engine you should look into getting a longblock. I just replaced my engine with a remanufactured engine from Jasper engines. Couldn't beat the price for an engine with a 3yr warrenty delivered to your door in two days.
__________________
'69 C/10 Short Wide 350/400/AC/Tilt/Tach |
|
|
|
|
02-25-2004, 12:51 PM
|
#5 | |
|
Howzit?!?
Join Date: Jan 2003
Location: Maryville, TN
Posts: 1,266
|
Re: Machine Shops
Quote:
I'm glad to hear that another 307 is getting freshened up instead of being switched out  -- granted I'll get a 350 when my 307 has seen it's last days too, but it's still a good motor.As for the engine only being good for one rebuild, I thought that only applied when you bore out the cylinders. What I have heard is that the 307 cylinders 'should' only be bored once since they are thinner to begin with. Good luck finding a shop! J
__________________
Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold |
|
|
|
|
|
02-25-2004, 03:23 PM
|
#6 |
|
Beer Power!!!!!!!!!!
Join Date: Nov 2003
Location: Nacogdoches, TX
Posts: 280
|
Man thats great jimfulco, I work in Henderson!!! I'll run them by and talk with them. I really want to keep my truck as original as possible and the 307 has lasted over 30 years without a hiccup! I guess the 307 block has only average nickel content--anyone know???
__________________
Rather be fishin' |
|
|
|
|
03-01-2004, 05:23 AM
|
#7 |
|
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
I know of a very good machine shop where i get all my stuff done over in greenville. Pm if you need details. Reasonable price full remanufacutred/rebuild.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
