![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,868
|
I-6 power steering pump bracket?
Is the power steering pump bracket specific to the I-6?
I have the whole PS system but the pump bracket is from a Small Block. If it is specific, is there a vendor that sells them? If not, would a bracket from a later year (square body) work? I've never seen a 67-72 I-6 truck with PS in the yard, but have on the later models |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,257
|
Re: I-6 power steering pump bracket?
The L6s had different P/S brackets, one for the 250 and another for the 292. They were both totally different from the SBC brackets. I don't know if big block V8s had different brackets from small blocks. Probably so.
P/S brackets for the 250 can be found with a little digging. 292s were a different story. Quite rare, as most 292s were in work trucks, fleet trucks, school busses, UPS vans, etc. and were not ordered with any extras. I've seen 292 P/S and AC brackets on ebay, but aftermarket stuff, and expensive. Pix showing a 250 P/S Pump and bracket not quite fitting a 292 L6.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 07-07-2017 at 01:01 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,149
|
Re: I-6 power steering pump bracket?
Just FYI, the later I6 with integral-manifold-head brackets are different than the early ones that have a separate manifold. They can be modified, but it is best to find like for like. Novas seem to be a good source for this bracket for some reason.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,868
|
Re: I-6 power steering pump bracket?
Well, it sounds like I'll be on the hunt for a Leprechaun, riding a Unicorn.
![]() Wish me luck. ![]() Oh, and thanks for all the info |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,257
|
Re: I-6 power steering pump bracket?
That's only Leprechauns with Red vests on Roan unicorns.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2014
Location: PA
Posts: 1,417
|
Re: I-6 power steering pump bracket?
Do you have a 250 or a 292? Here is a pump with 292 bracket on eBay. https://www.ebay.com/itm/232022190254
__________________
1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP |
![]() |
![]() |
![]() |
Bookmarks |
|
|