Mechanical 'Catch of the day' - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Coley · 02-22-2014, 12:08 PM

well....I lucked out a bit today so I thought I'd share.
I scored a complete 350-4bbl engine w/ 90% of the accessories with it (HEI ignition, exhaust manifolds, fuel pump, starter, ring gear, intake manifold, air cleaner, waterpump, balancers, etc, etc)....on a brand new engine stand...for $80.
Plus as an added bonus I got a brand new 60 gallon (John Woods) hot water heater for $100 from the same guy (Electrician cleaning out his shop!!).
Now the motor is nothing too special...I believe its a 1975 Truck engine that was the guys grandfathers and it was supposedly running well when removed...but I needed an engine stand so I figure thats worth $30 in the deal...taking the motor down to a $50 commitment.
I'm not sure what I'm going to do with the motor yet...maybe compression test...then sell as a 'builder' or?

Still.....who doesn't like or can't resist a good deal?...LOL

Coley

**bigmac73** · 02-22-2014, 01:05 PM

Quote:

Originally Posted by Coley

well....I lucked out a bit today so I thought I'd share.
I scored a complete 350-4bbl engine w/ 90% of the accessories with it (HEI ignition, exhaust manifolds, fuel pump, starter, ring gear, intake manifold, air cleaner, waterpump, balancers, etc, etc)....on a brand new engine stand...for $80.
Plus as an added bonus I got a brand new 60 gallon (John Woods) hot water heater for $100 from the same guy (Electrician cleaning out his shop!!).
Now the motor is nothing too special...I believe its a 1975 Truck engine that was the guys grandfathers and it was supposedly running well when removed...but I needed an engine stand so I figure thats worth $30 in the deal...taking the motor down to a $50 commitment.
I'm not sure what I'm going to do with the motor yet...maybe compression test...then sell as a 'builder' or?

Still.....who doesn't like or can't resist a good deal?...LOL

Coley

if you dont need the engine i say invest a couple of hundred bucks on a bearing/ring and gasket kit and throw some paint on it and you might get 700 to 900 bucks for it , provided the heads and block are in good shape

02-22-2014, 12:08 PM	#1
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Mechanical 'Catch of the day' well....I lucked out a bit today so I thought I'd share. I scored a complete 350-4bbl engine w/ 90% of the accessories with it (HEI ignition, exhaust manifolds, fuel pump, starter, ring gear, intake manifold, air cleaner, waterpump, balancers, etc, etc)....on a brand new engine stand...for $80. Plus as an added bonus I got a brand new 60 gallon (John Woods) hot water heater for $100 from the same guy (Electrician cleaning out his shop!!). Now the motor is nothing too special...I believe its a 1975 Truck engine that was the guys grandfathers and it was supposedly running well when removed...but I needed an engine stand so I figure thats worth $30 in the deal...taking the motor down to a $50 commitment. I'm not sure what I'm going to do with the motor yet...maybe compression test...then sell as a 'builder' or? Still.....who doesn't like or can't resist a good deal?...LOL Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500 Last edited by Coley; 02-22-2014 at 12:13 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.