|
|
|
11-07-2002, 11:55 PM
|
#1 |
|
Some like em' long!
Join Date: Nov 2002
Location: Grace, Idaho
Posts: 69
|
front diff help!
i know this is the wrong forum section for this thread, but this seems to be the only forum with good active traffic.
on my 90 GMC 1/2 ton four wheel drive, i have recently noticed a constant clicking noise coming fromt the front end while driving slowly around my farm. this noise is apparent when wheels are turned left or right, and in either forward or reverse. not apparent when wheels are straight or near straight. haven't tried it in four wheel drive to see if the noise is apparent then, just two wheel drive. any help is greatly appreciated! thanks much  forever
__________________
1971 chevy c10 lwb- 300 hp 350 crate motor, soon to be more with ported and polished 62cc chamber 461 double humps, TH400, 3.73 posi, used to be my uncle's truck 1972 chevy k10 lwb- 350,4 spd, old and tired, dad bought brand new and is now mine 1968 chevy c20 lwb- 327, 4 spd, was originally a 50th anniversary truck 1990 GMC K1500-just my runaround truck 1982 Chevy K10 shortbed, new motor and new paint, another project in the mix of the others. IMPORTS SUCK! |
|
|
|
11-08-2002, 12:00 AM
|
#2 |
|
Gotta Startem Early
Join Date: Oct 2001
Location: Amarillo, TX, USA
Posts: 364
|
The oil in the transfer case should be changed quite often. May not be the problem but I have seen many people who dont change the oil every 25K and end up with problems. I am not real knowledgable on 4X4 but just a word of advice.
__________________
67 SWB In Progress, one piece at a time, maybe 3 years I will be finished |
|
|
|
|
11-08-2002, 12:07 AM
|
#3 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
what kinda hubs it have on it ?
|
|
|
|
|
11-08-2002, 12:12 AM
|
#4 |
|
Some like em' long!
Join Date: Nov 2002
Location: Grace, Idaho
Posts: 69
|
ummm.. it has the front IFS with the automatic hubs which engage when put into four wheel drive.
__________________
1971 chevy c10 lwb- 300 hp 350 crate motor, soon to be more with ported and polished 62cc chamber 461 double humps, TH400, 3.73 posi, used to be my uncle's truck 1972 chevy k10 lwb- 350,4 spd, old and tired, dad bought brand new and is now mine 1968 chevy c20 lwb- 327, 4 spd, was originally a 50th anniversary truck 1990 GMC K1500-just my runaround truck 1982 Chevy K10 shortbed, new motor and new paint, another project in the mix of the others. IMPORTS SUCK! |
|
|
|
|
11-08-2002, 01:07 AM
|
#5 |
|
440 american Horses
Join Date: Mar 2001
Location: Anoka, MN USA
Posts: 470
|
Does it click while going straight forward? My guess would be the CV Shafts. Have to look at it myself to be 100% sure. IF they are the original shafts, I can almost gaurantee they are the problem.
__________________
Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America 
|
|
|
|
|
11-08-2002, 01:37 AM
|
#6 |
|
Some like em' long!
Join Date: Nov 2002
Location: Grace, Idaho
Posts: 69
|
they don't click while going straight forward or backwards. that was my original thought, bad cv axles. they look original(lots of crap and grease on them, with cracks in the boots) but not yet ripped.
how much do a set of them run.
__________________
1971 chevy c10 lwb- 300 hp 350 crate motor, soon to be more with ported and polished 62cc chamber 461 double humps, TH400, 3.73 posi, used to be my uncle's truck 1972 chevy k10 lwb- 350,4 spd, old and tired, dad bought brand new and is now mine 1968 chevy c20 lwb- 327, 4 spd, was originally a 50th anniversary truck 1990 GMC K1500-just my runaround truck 1982 Chevy K10 shortbed, new motor and new paint, another project in the mix of the others. IMPORTS SUCK! |
|
|
|
|
11-08-2002, 05:14 AM
|
#7 |
|
huh?
 
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
|
I can't help you with prices, but I would have to say that your CV axles are most likely the problem. I've seen many that only click while turning. It's a common problem when they start going bad.
TJ
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
|
|
|
|
11-08-2002, 09:52 AM
|
#8 |
|
Registered User
Join Date: Oct 2000
Location: St. Johns, Arizona
Posts: 2,660
|
CV shafts most likely.
__________________
my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans? |
|
|
|
|
11-08-2002, 09:22 PM
|
#9 |
|
Some like em' long!
Join Date: Nov 2002
Location: Grace, Idaho
Posts: 69
|
update!
now, since about six hours ago, the four wheel drive will not engage at all, when put in either four hi or four low, the light comes on but does not engage the front diff. it makes a terrible chatter noise when trying to go. i think that the four wheel drive actuator(engages front diff) has gone bad because it worked a week ago when i drove home in a pretty good snow storm we had, and also worked just three days ago when i had it in four low.
thank goodness for good ol' locking hubs!! forever
__________________
1971 chevy c10 lwb- 300 hp 350 crate motor, soon to be more with ported and polished 62cc chamber 461 double humps, TH400, 3.73 posi, used to be my uncle's truck 1972 chevy k10 lwb- 350,4 spd, old and tired, dad bought brand new and is now mine 1968 chevy c20 lwb- 327, 4 spd, was originally a 50th anniversary truck 1990 GMC K1500-just my runaround truck 1982 Chevy K10 shortbed, new motor and new paint, another project in the mix of the others. IMPORTS SUCK! |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
